• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.759-762
• /
• 2003

The epitaxially grown Mg-doped GaN thin film was prepared by MOCVD (Metal Organic Chemical Vapor Deposition) for a SAW(Surface Acoustic Wave) filter. Mg-doped GaN thin film had enough properties for a SAW filter which include crystallinity and morphology. The surface morphology and crystalline of the Mg-doped GaN thin films were characterized using AFM and an X-ray rocking curve. The SAW filter, which was fabricated by lift-off process and frequency response, was measured by HP 8753C network analyzer. Center frequency was 96.687 MHz and SAW velocity was 5801 m/s when wavelength(λ) was 60${\mu}{\textrm}{m}$. Insertion loss was over -10 dB, Q was factor over 200, and side lobe attenuation was over 22 dB which was suitable for use as a SAW filter. Electro-mechanical coupling coefficient (k$^2$) was calculated from the measured data. k$^2$ was from 1 % to 1.44 %. The fabricated SAW filter using Mg-doped GaN/sapphire structure has good qualities as a filter and will be used as a SAW filter for operating RF frequency.

• 대한전자공학회논문지
• /
• 제13권1호
• /
• pp.16-22
• /
• 1976

비가역성 소자인 광대역 마이크로스트립 Y형 써어클레이티는 Bosma의 Green함수를 적용하여 Rosenbaum이 해석하띠 산란행렬로 실제적 이론치인 삽입손실, 아이솔궤이션을 구하였다. 중요한 설계 변수로는 전봉선과 접합각인 ${\psi}$이고 이를 알맞게 선택하여 광대역 정합을 이루었다. 또한 Y형 써어쿨레이터의 입력칟지던스를 구하였다. 제작시 실표반학은 이론치보다 7.5% 적은것을 요하며 5-11GHz에서 V.S.W.R.은 1.5이하였고 최대 삽입손집은 0.5dB, 아이슬레이션은 15dB 이상이었다.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1866-1873
• /
• 2002

The pipe-cutting machine developed in this study is a portable device used to cut a steel pipe. The machine, which is attached to the steel pipe by magnetic force, is moving around the pip e using four wheels. It also works for straight cutting of a steel plate. For the higher precision and labor time reduction, the automation of a pipe-cutting process is needed. However, it is not easily achieved because of vibrations and the loss of track. It is also found that the problems of the automation arise from the coupling of the functional requirements for the pipe-cutting machine. So, it is very difficult io solve the problems by a conventional design method. To overcome the difficulties the new design process for the pipe-cutting machine is established by axiomatic approach in this paper. Based on the Independence Axiom design process, a new product is designed and manufactured. Finally, it is verified by experiments that the performance of the automatic pipe-cutting machine is improved

• Journal of Magnetics
• /
• 제14권4호
• /
• pp.161-164
• /
• 2009

Iron-doped $Sn_{1-x}Fe_xO_2$ (x = 0.0, 0.05, 0.1, 0.2, 0.33) thin films on Si(100) substrates and powders were prepared by a chemical solution process. The x-ray diffraction (XRD) patterns of the $Sn_{1-x}Fe_xO_2$ thin films and powders showed a polycrystalline rutile tetragonal structure. Thermo gravimetric (TG) - differential thermal analysis (DTA) showed the final weight loss above $430{^{\circ}C}$ for all powder samples. According to XRD Rietveld refinement of the powders, the lattice parameters and unit cell volume decreased with increasing Fe content. The magnetic properties were characterized using a vibrating sample magnetometer (VSM) and M$\ddot{o}$ssbauer spectroscopy. The thin film samples with x = 0.1 and 0.2 showed paramagnetic properties but thin films with x = 0.33 exhibited ferromagnetic properties at room temperature. Mossbauer studies revealed the $Fe^{3+}$ valence state in the samples. The ferromagnetism in the samples can be interpreted in terms of the direct ferromagnetic coupling of ferric ions via an electron trapped in a bridging oxygen deficiency, which can be explained using the F-center exchange model.

• 한국광학회지
• /
• 제6권1호
• /
• pp.21-25
• /
• 1995

연속출력 1.2W인 도파관 $CO_{2}$레이저를 설계 제작하고 회전 다면경을 이용하여 Q-스위칭 동작시켜 그 특성을 측정하였다. 내경 2mm, 길이 100mm인 BeO튜브를 사용하여 도파관 $CO_{2}$레이저를 제작한 뒤, Q-스위칭을 수행하기 위해서 레이저의 전반사경 위치에 회전 다면경을 설치하였다. 다면경을 7,559RPM으로 회전시킬 때 발생된 Q-스위칭된 레이저의 펄스폭은 120ns이고 각 펄스의 첨두출력은 250W이었다.

• 대한전자공학회논문지SD
• /
• 제37권4호
• /
• pp.53-59
• /
• 2000

광섬유-평면도파로 결합기의 편광선택성을 이용한 새로운 구조의 광섬유형 편광기를 설계 및 제작하였다. 금속클래드-평면도파로의 높은 복굴절을 이용함으로서 동작 파장범위를 증가시킬 수 있었다. 평면도파로의 코어층으로 폴리머를, 클래딩으로 금(Au)을 각각 사용하였다. 실험결과는 평면도파로의 두께를 조절하여 TE편광 혹은 TM 편광이 만들어 질 수 있음을 보인다. 16㏈ 이상의 편광소멸비를 만족하는 파장범위는 130nm 이상으로 나타났고 삽입손실은 0.5㏈ 정도였다.

• 대한전자공학회논문지TC
• /
• 제49권2호
• /
• pp.39-49
• /
• 2012

병렬 스터브를 이용하여 개구면 결합 마이크로스트립 패치 안테나 (ACMPA)의 임피던스 대역폭을 넓히는 방법에 대해 연구하였다. H-모양의 개구면을 가지는 일반적인 ACMPA를 설계하고 등가회로의 전기적 파라미터를 추출하였다. 급전선로에 병렬 스터브를 삽입하여 ACMPA의 임피던스 대역폭을 확장시키는 방법을 제시하였다. 병렬 스터브를 삽입한 ACMPA의 -10dB 임피던스 대역폭은 최대 약 14 %로 일반적인 ACMPA의 최대 임피던스 대역폭 5.4 %와 비교하여 대역폭이 약 160 % 증가함을 볼 수 있었다.

• 한국전자파학회논문지
• /
• 제12권5호
• /
• pp.713-721
• /
• 2001

본 논문에서는 이미 설계된 기생 패치 구조와 적층 구조 광대역 마이크로스트립 안테나에 평행 결합 선로 형태의 광대역 임피던스 정합 회로를 결합하여 쉽게 추가적인 대역폭 증가를 이룰 수 있음을 제안하였다. 평행결합 선로 형태의 광대역 임피던스 정합 회로 설계를 위하여 분포 회로 방식의 반복적인 방법을 제시하였고, 설계.제작한 안테나의 측정 결과 기생 패치 구조와 적층 구조에서 각각 약 1.6배 1.5배의 추가적인 임피던스 대역폭 증가를 이룰 수 있었다. 그리고 방사 패턴과 측정된 이득을 보면 평행 결합 선로의 결합으로 인한 방산 패턴에서의 큰 변화는 보이지 않았지만, 이득에서는 평행 결합 선로 부분의 커플링 손실로 인해 최대 이득이 약 1 dB와 0.5 dB 정도 감소하는 것을 확인할 수 있었다.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1730-1736
• /
• 2013

Slanted and chirp interdigital transducer(IDT) configurations were studied for generating the surface acoustic wave(SAW) with wide bandwidths on a piezoelectric substrate. These devices can be applied to manipulate optical path of light along the waveguide, ultimately used for optical switches and holographic image implementation. Prior to fabrication, the coupling of modes(COM) modeling and simulation were performed to extract optimal design parameters. The optimally designed wideband device showed wide bandwidth of 30MHz, low insertion loss of -25dB, and abrupt side suppression ratio (SSR). Several design conditions were determined during device implementation, such as slanted angle, aperture length, number of fingers, and central frequencies of IDTs. These factors were experimentally analyzed and described in details in this paper.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.77-82
• /
• 2008

Strain-gauges have been dominantly used to measure strain at various points on a rotor, however, either a slip ring or telemetry has to be used to send sensor signals to data acquisition instruments at stationary side. Both slip ring and telemetry have numerous inherent problems which force severe limitations in real applications. This paper introduces a new rotor condition monitoring system using FBG(Fiber Bragg Grating) sensors and a rotary optical coupler. A single optical fiber with many FBG sensors is installed on the rotor and an optical dynamic interrogator is installed at stationary side. The sensor signal connection between rotating part and stationary part is made by the rotary optical coupling method which makes use of light's unique characteristic-light travels through space. Broad band light source from the interrogator travels to the optical fiber on the rotor and reflected FBG sensor signals travel back to the optical fiber on stationary side and are connected to the interrogator. Rotary optical coupler's insertion loss change due to rotation is compensated by using a reference sensor installed at the center of the rotor. The proposed system's performance has been successfully demonstrated by accurately measuring strains at 5 points on a blade rotating at high speed.