• 한국항행학회논문지
• /
• 제22권4호
• /
• pp.311-318
• /
• 2018

본 논문에서는 소형발사체의 무선통신 시스템 검증을 위한 테스트 베드를 제안한다. 제안하는 테스트 베드는 안테나 테스트 커플러와 RF 감쇄기 및 스위칭 시스템으로 구성되어 있다. 안테나 테스트 커플러는 소형 발사체에 장착되어 있는 각 대역별 안테나를 서로 격리 시키며 무선신호를 송/수신하기 위한 장치이며 RF 감쇄기 및 스위칭 시스템은 각 대역의 안테나별 통신점검을 위하여 안테나별 경로를 선택해 주는 장치이다. 안테나 테스트 커플러 설계 결과, UHF-, S-, X-대역에서 39.3, 47.1, 56.1 dB 이상의 차폐율을 확인 할 수 있었다. 실제 소형 발사체에 적용하여 발사체 통신 시스템을 점검한 결과, 정상적으로 데이터 송/수신을 확인 할 수 있었으며, 안테나 경로 스위칭을 통하여 각 대역의 안테나별 통신 점검을 수행할 수 있었다.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.65-72
• /
• 2019

In long freight trains, there is a brake time delay in neighboring freight cars, which causes damage and fractures in the couplers, especially at their knuckle. A problem in the couplers of the cars can cause derailment and damages of human life and property. In this study, maximum forces on the couplers are studied when a long freight car brakes with the brake delay time and coupler gap. We make a dynamic model of 50 freight cars and couplers, applying contact between the couplers and a characteristic curve to express the force and displacement of the buffers using SIMPACK, which is a multi-body dynamics program. We use EN 14531-2, which is a standard of freight car brakes, to verify the dynamic model. Then, we compare the analyzed impact force with the coupler knuckle standard after applying the two carriages of a locomotive in the model based on the dispersed double head control system. The result shows that all coupler gap conditions satisfy the infinite lifetime of the material when the brake delay time is 0.1 second.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.89-93
• /
• 2000

Recently many research activities on the diagnosis of stator winding insulation of large rotating machines have been reported. Capacitive couplers are widely used as sensors for on-line partial discharge (PD) measurement of high voltage rotating machines. This paper presents laboratory test to compare Stator Slot Coupler (SSC), Resistance Temperature Detector (RTD), 80 [pF] coupler and 500 [pF] coupler for on-line PD measurement of rotating machines. And a novel on-line monitoring system for an insulation diagnosis is proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3132-3134
• /
• 1999

To realize the power line communication system, the line coupler is one of the most important systems, which must be adjustable to the power line characteristics. In this paper, three kinds of line couplers were designed and simulated with the Pspice, which could be useful to the power line communication systems in C-Band(95kHz-148.5kHz) frequency

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.368-375
• /
• 1999

This paper describes the evaluation methods and criteria used verify field performance of automatic multi-coupler for the PMC rolling stock. Automatic multi-coupler was designed and manufactured by KRRI , Woojin electric machinery CO., and Yujinchajeon MFG.CO., LTD in 1999. Through field performance test of PMC rolling stock, vibration, brake system, assembly and disassembly of complex train were measured on the condition of service operation. As a result, test results meet the criteria proposed by KNR and KRRI.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2203-2205
• /
• 2003

KIRAMS-13, the first medical cyclotron developed by domestic technique, is used to produce radio-isotope such as $^{18}F$ whose life time is relatively short through test operation. For high-power operation of charged particle accelerators, the power coupler must withstand enormous stresses due to charging induced by high RF power passing through. High-power RF testing with peak power in excess of 30kW has been performed on prototype power coupler for KIRAMS-13 normal conducting cavities. CST MICROWAVE STUDIO(CST MWS) is used for fundamental RF Design, and power coupler is manufactured according to fundamental power coupler design requisite. The qualification of the couplers has occurred for the time being only in a limited set of conditions as the available RF system and control instrumentation are under improvement.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.117-122
• /
• 2017

In this study, we studied the ride quality considering the deterioration effects of the three type couplers (single, double, and ring types) for EMUs. In order to know the impact occurred when an urban transit vehicle is under breaking, we tested the conditions of the service brake and the emergency brake. Normal coupler models without any slack showed similar dynamic performance results under all breaking conditions. But if the couplers become old, the initial pre-stresses are removed because of permanent compressive deformation in rubber. For three types of the old coupler models without the initial pre-stress, we evaluated dynamic performances of each type. As the results, the maximum and average acceleration levels of the double type and the ring type were similarly low in all conditions. But the accelerations of the single type coupler was high when compared to those of the double and ring types. In addition, Jerk value of the single type model associated with ride quality was high up to 15 times to the ring type in condition of the service braking in empty vehicle weight. Jerk value of the double type model was high up to 6 times to the ring type.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.309-312
• /
• 2001

In this paper, we proposed a system for bit stream wireless communication using audio/video infrared transceiver and implemented a circuit. The proposed transmitter system converted bit stream into analog signal format that is similar to NTSC. Then the analog signal can be transmitted by infrared spatial coupler for A/V signals. And the receiver system recover the bit stream by inverse process of transmitter.

• 한국산업융합학회 논문집
• /
• 제25권6_1호
• /
• pp.953-959
• /
• 2022

In this paper, the design result of robotic tools and the development of robot control system for chemical coupler assembly are presented. This research aims to eliminate the risk of chemicals exposed to human operators by developing the robotic tools and robot automation system for chemical tank lorry unloading that were done manually. Due to tight tolerance between couplers, even small pose error may result in very large internal force. In order to resolve the problem, the 6-axis compliance device is employed, which can provide not only enough compliance between couplers but also F/T sensing. The 6-axis compliance device having large force and moment capacity is designed. A simple linear gripper with rack-and-pinion is designed to grasp two sizes of couplers. The proposed robot automation system consists of 6-DOF collaborative robot with offset wrist, 6-axis compliance device with F/T sensing, linear gripper, and two robot visions.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.401-406
• /
• 2016

반사파 계측법을 기반으로 활선 상태의 케이블 고장과 위치를 검출할 때, 케이블과 계측 장치사이에 커플러가 사용된다. 이러한 커플러는 케이블에 공급되는 전압으로부터 반사파 계측 기반의 시험 회로의 손상을 예방하게 된다. 또한 케이블에 인가되고 반사되는 송수신 신호의 커플링 통로를 제공한다. 본 논문에는 반사파 계측법을 이용하여 사선과 활선 상태에서 케이블 고장 위치를 검출하는데 사용하기 위한 접촉식 커플러를 설계 및 제작하였다. 제안된 커플러는 유도성 결합 형태로 설계되었고 시뮬레이션을 통해 손실을 계산한 후 제작하였다. 제작한 커플러는 신호 입력에 따른 출력을 측정하여 손실과 주파수 평탄도 실험을 실시하였다. 그 결과 1Mhz 이상의 주파수 대역에서는 신호의 전송 손실이 1.75dB 이하로 측정되었다. 활선 상태에서 케이블 고장과 위치 검출에 적용하기 위해 sequence time domain reflectometry (STDR)과 spread spectrum time domain reflectometry (SSTDR)에 기반한 반사파 계측법 시스템을 구축하여 케이블 고장과 위치 검출 실험을 실시하였다. 그 결과 본 연구에서 제안한 커플러가 활선 케이블 고장 검출을 위한 반사파 계측 장치에 사용될 수 있음을 확인하였다.