• Title/Summary/Keyword: Coupled-Feed

Search Result 138, Processing Time 0.029 seconds

Characteristics of a Microstrip Circularly-Polarized Aperture-Patch $8\times8$ Array Antenna (마이크로스트립 원형 편파 개구면-패치 $8\times8$ 배열 안테나의 특성)

  • 김인광;박위상
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.7
    • /
    • pp.1022-1032
    • /
    • 1999
  • The radiation characteristics of a microstrip circularly-polarized aperture-patch $8\times8$ array antenna are investigated at X-band. The radiator consists of a truncated square aperture on the ground plane with an inclined rectangular patch inside, and it is coupled by a microstrip line on the opposite side of the ground. The element spacing of the array was chosen as $0.8\lambda_0$so as to minimize the mutual coupling and maximize the gain. A corporate feed network was employed to distribute the power to each element through four Wilkinson and two T-junction dividers. Measurement results for the $8\times8$ array at 10 GHz showed a directivity of 26.3 dBi, a gain of 22.2 dBi, an axial ratio of 2.97 dB, and a side lobe level of -12.7dB. It was observed that when the array size increases, the directivity increases while the efficiency decreases.

  • PDF

Compact 1×2 and 2×2 Dual Polarized Series-Fed Antenna Array for X-Band Airborne Synthetic Aperture Radar Applications

  • Kothapudi, Venkata Kishore;Kumar, Vijay
    • Journal of electromagnetic engineering and science
    • /
    • v.18 no.2
    • /
    • pp.117-128
    • /
    • 2018
  • In this paper, compact linear dual polarized series-fed $1{\times}2$ linear and $2{\times}2$ planar arrays antennas for airborne SAR applications are proposed. The proposed antenna design consists of a square radiating patch that is placed on top of the substrate, a quarter wave transformer and $50-{\Omega}$ matched transformer. Matching between a radiating patch and the $50-{\Omega}$ microstrip line is accomplished through a direct coupled-feed technique with the help of an impedance inverter (${\lambda}/4$ impedance transformer) placed at both horizontal and vertical planes, in the case of the $2{\times}2$ planar array. The overall size for the prototype-1 and prototype-2 fabricated antennas are $1.9305{\times}0.9652{\times}0.05106{{\lambda}_0}^3$ and $1.9305{\times}1.9305{\times}0.05106{{\lambda}_0}^3$, respectively. The fabricated structure has been tested, and the experimental results are similar to the simulated ones. The CST MWS simulated and vector network analyzer measured reflection coefficient ($S_{11}$) results were compared, and they indicate that the proposed antenna prototype-1 yields the impedance bandwidth >140 MHz (9.56-9.72 GHz) defined by $S_{11}$<-10 dB with 1.43%, and $S_{21}$<-25 dB in the case of prototype-2 (9.58-9.74 GHz, $S_{11}$< -10 dB) >140 MHz for all the individual ports. The surface currents and the E- and H-field distributions were studied for a better understanding of the polarization mechanism. The measured results of the proposed dual polarized antenna were in accordance with the simulated analysis and showed good performance of the S-parameters and radiation patterns (co-pol and cross-pol), gain, efficiency, front-to-back ratio, half-power beam width) at the resonant frequency. With these features and its compact size, the proposed antenna will be suitable for X-band airborne synthetic aperture radar applications.

A Study on Design and Fabrication of Quad-Band Small Antenna with MD(magneto-dielectric) material for mobile Applications (MD 매질을 이용한 이동통신용 Quad-Band 소형 안테나 설계 및 구현에 관한 연구)

  • Kim, Woo-Su;Yoon, Cheol;Oh, Soon-Soo;Kang, Suk-Youb;Park, Hyo-Dal
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.5
    • /
    • pp.1270-1276
    • /
    • 2010
  • In this paper, Quad-Band small antenna for GSM850, GSM900, DCS1800, DCS1900 is designed and fabricated. The antenna achieved the size reduction of over 67.9 % than the conventional PIFA(Planar Inverted-F Antenna) by using a MD(Magneto-Dielectric) material. A simple feeding microstrip line is used to feed the antenna from a $50{\Omega}$ coaxial line, which is capacitively coupled to the grounded patch structure for broadband characteristics. The impedance bandwidth the proposed antenna shows good results as broadband characteristics of 1341 MHz (801 ~ 2142 MHz) in VSWR < 3 (${\leq}\;-6\;dB$) and the gain is -6.67 ~ 4.25 dBi in the operating frequency.

Effect of Mungbean Sprouts Juice on Cadmium-Induced Hepatotoxicity in Rats (녹두나물 생즙이 카드뮴에 의한 흰쥐의 간손상에 미치는 영향)

  • 이명렬;최인화;김성오;김경수
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.27 no.5
    • /
    • pp.980-986
    • /
    • 1998
  • The effects of mungbean sprout juice on cadmium-induced hepatotoxicity in rats were investigated. Sprague-Dawley rats weighing about 90g were divided into 4 groups and raised for 6 weeks. ; control group(CON), mungbean sprouts juice-administered group(MSJ), cadmium-administered group(CAD) fed water containing 40 ppm cadmium chloride and mung bean sprouts juice and cadmium-administered group(MCD). The diet was supplied every day for the measurement of feed efficiency ratio(FER) and net weight gain was measured every 3 days. The activities of serum glutamic oxaloactic transaminase(GOT) and glutamic pyruvic transaminase(GPT), superoxide dimutase(SOD), catalase and glutathione peroxidase(GSH-Px) in the liver and the hepatic contents of glutathione were examined. The contents of Cd in liver and kidney of the rats were determined by using ICP(Inductively Coupled Plasma Emission Spectrophotometer). Growth rate and FER were decreased in CAD group, compared with CON group but the changes were not significant in MCD group. The activities of serum GOT and GPT, SOD, catalase and GSH-Px in the liver were increased by Cd administration, but the alterations were decreased by supplementation with mungbean sprouts juice. The level of glutathione decreased in CAD group(26.8$\pm$9.0mg/g liver), whereas it increased in MCD group(36.4$\pm$15.8mg gliver). The content of Cd in the liver and kidney in MCD group(9.57 ppm, 4.88 ppm) was decreased, compared with CAD group(12.81 ppm, 5.46 ppm). This result suggested that mungbean sprout juice has a lowering effect on the accumulation of Cd in the liver and kidney and it is believed that the juice has some protective effects to Cd-induced hepatotoxicity in rats, but the mechanism of these effects was obscure.

  • PDF

Development of an analytical method for the determination of dl-methylephedrine hydrochloride in porcine muscle using liquid chromatography-tandem mass spectrometry (LC-MS/MS를 이용한 돼지 근육조직 중 dl-methylephedrine hydrochloride의 잔류 분석법 개발)

  • Chae, Won-Seok;Kim, Suk;Lee, Hu-Jang
    • Korean Journal of Veterinary Research
    • /
    • v.60 no.4
    • /
    • pp.209-213
    • /
    • 2020
  • This study examined the residue of dl-methylephedrine hydrochloride (MEP) on the muscle of pigs administered orally with MEP 12 g/ton feed for seven consecutive days. Twenty healthy cross swine were administered MEP. Four treated animals were selected arbitrarily to be sacrificed at 1, 2, 3, 4, and 5 days after treatment. MEP residue concentrations in the muscle were determined by liquid chromatography coupled with tandem mass spectrometry. The drug was extracted from muscle samples using 10 mM ammonium formate in acetonitrile followed by clean-up with n-hexane. The analyte was separated on an XBridgeTM hydrophilic interaction liquid chromatography column using 10 mM ammonium formate in deionized distilled water and acetonitrile. The correlation coefficient (R2) of the calibration curve was 0.9974, and the limits of detection and quantification were 0.05 and 0.15 ㎍/kg, respectively. The recoveries at three spiking levels were 94.5-101.2%, and the relative Standard Deviations was less than 4.06%. In the MEP-treated group, MEP residues on one day post-treatment were below the maximum residue limit in the muscle. The developed method is sensitive and reliable for the detection of MEP in porcine muscle tissues. Furthermore, it exhibits low quantification limits for animal-derived food products destined for human consumption.

Exploiting the Maximum Productive Potential of Spent Laying Hens with Various Metabolizable Energy and Protein Levels after Induced Molting (강제환우시킨 산란노계에서 생산성 제고를 위한 대사에너지와 단백질 수준의 탐색)

  • Akram, M.;Park, J. H.;Ryu, M. S.;Shin, K.H.;Ryu, K. S.
    • Journal of Animal Science and Technology
    • /
    • v.45 no.3
    • /
    • pp.369-376
    • /
    • 2003
  • This experiment was conducted to investigate the influence of different levels of metabolizable energy (ME) and crude protein (CP) on post-molt performance and egg quality of spent laying hens. Four hundred and thirty two, ISA Brown hens at sixty six weeks of age after molt induction were fed six experimental diets containing three ME (2,750, 2,800, 2,850 kcal/kg) with two CP (15, 17%) levels in a factorial design. The influence of ME and CP were evaluated on egg production, egg weight and feed intake throughout 24 weeks of production. Egg mass and feed conversion ratio (FCR) were measured during the experimental period. Haugh unit, yolk color and eggshell breaking strength were measured at 5%, 50%, peak, post peak and end stage of egg production. The hens fed 2800 kcal/kg diet along with 15% CP recorded the highest outcome of egg production (P<0.05). The egg weight has been shown to increase with hens receiving 2,800 kcal/kg ME. Daily egg mass tended to increase in hens fed with 15% CP and 2,800 kcal/kg ME. Feed intake decreased significantly with the level of ME and CP in the diet increased (P<0.05). Yolk color was improved significantly in eggs laid by the hens receiving 17% CP than 15% diet. It also tended to be higher in 17% CP with 2,800 or 2,850 kcal/kg ME diet treatments. Egg shell breaking strength increased with hens receiving diets of 15% CP and 2,800 kcal/kg. From this experiment it can be concluded that the ME level of 2,800 kcal/kg coupled with 15% CP could be used to achieve the higher egg production and better eggshell strength in induced molting hens.

Design and Fabrication of 24 GHz 3-Beam Scan Antennas for ACC Applications (자동 주행 차량을 위한 24 GHz 3-Beam Scan 안테나의 설계 및 제작)

  • 원영진;이영주;공영균;김영수
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.14 no.1
    • /
    • pp.81-88
    • /
    • 2003
  • For driver's convenience, the ACC(Adaptive Cruise Control) requires a system which determines the direction of vehicles and controls the vehicle to keep the distance among the automobiles constant. This paper describes the microstrip array antennas designed to operate at 24 GHz, and used as a direction indicator of moving vehicles. 8${\times}$2 transmit array antenna with wide beamwidth, 8${\times}$4 receive center array antenna, and two 8${\times}$8 receive array antennas with narrow beamwidth were designed and fabricated. Measurement results for the arrays showed that the azimuthal beamwidth is 50$^{\circ}$and the gain is 16.7 dBi for the transmit array antenna. For the receive array antenna, the center, the left, and the right array antenna have beamwidths of 20$^{\circ}$, 13$^{\circ}$, 13$^{\circ}$respectively, and have gains of more than 20 dBi. The left and right array antenna have the beam tilt angle of ${\pm}$18$^{\circ}$. The measured radiation patterns showed a good agreement with the simulated patterns, and the designed array antennas are suitable fur detecting 3 directions of the vehicle within the scan angle area.

Broadband Hybrid Antenna with Directional Radiation Pattern Utilizing Epsilon Negative Zeroth-Order Resonance (ENG 영차 공진을 이용하여 대역폭이 개선되고 지향성 방사 패턴을 갖는 하이브리드 안테나)

  • Kim, In-Ho;Lee, Jeong-Hae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.8
    • /
    • pp.886-892
    • /
    • 2010
  • In this paper, the hybrid antenna utilizing epsilon negative zeroth-order resonance(ENG ZOR) and $TM_{010}$-mode is presented. The antenna has a directional radiation pattern and improved bandwidth. To obtain a ENG ZOR and $TM_{010}$-mode, the hybrid antenna employs the mushroom structure and the microstrip patch, respectively. Two antennas of the mushroom and the patch are coupled by gap and fed by one coaxial feed. The frequencies of ENG ZOR and of $TM_{010}$ resonance are designed to be 4 GHz and 3.9 GHz, respectively. Because two resonant frequencies are set to be close, the dual-resonance can be formed, resulting in the broader bandwidth. Even though the radiation pattern of an ENG ZOR antenna is omnidirectional, the directional radiation of a microstrip patch antenna compensates the null of omnidirectional pattern of an ENG ZOR antenna. Thus, the hybrid antenna has a directional radiation pattern. The antennas having 4, 3, and 2 unit cells of mushroom structure are designed and analyzed. The antennas have fractional bandwidths of 4.29~4.95 %, gains of 3.16~5.57 dBi, and radiation efficiencies of 62.4~94.2 %.

Process Development for the Recovery of Sialic Acid Fraction by Enzymatic Hydrolysis of Egg Yolk Protein (난황 단백질의 효소 가수분해에 의한 sialic acid의 회수 공정 개발)

  • Kang Byung Chul;Lee Kwang Hyun
    • Journal of Life Science
    • /
    • v.15 no.1 s.68
    • /
    • pp.9-14
    • /
    • 2005
  • Batch enzymatic hydrolysis of egg yolk protein by protease was carried out at laboratory scale coupled to an ultrafiltration module. Effect of ethanol concentrations on the performance of enzymatic hydrolysis was studied to determine the optimum condition of recovery of hydrolysate. The enzymatic hydrolysis was conducted stepwise with following conditions, $50^{\circ}C$, pH 10.0 and pH 6.5. Ethanol concentration was changed from 10 to $40\%$ (w/w). As ethanol concentration was increased, the recovery yield of total solid and protein in enzymatic hydrolysate was also increased. The content of sialic acid and protein in hydrolysate was independent of ethanol concentration. We also investigated the effect of ethanol concentration on the performance of ultrafiltration. As the concentration of ethanol in yolk protein was increased, the recovery yield of product was increased. Ultra­filtration of egg yolk protein hydrolysate was conducted to increase the content of sialic acid. Four ultrafiltation modules were used in this study, and we evaluated the performance of the UF modules. When Amicon module was used, the recovery percentage of total solid in retentate was $6.0\%$, which is the highest among the modules used. In spite of the difference in the recovery yield of total solid, the purity of sialic acid in retentate was about $2.0\%$, which was 5 times higher than that in feed. It was concluded that the recovery yield and the purity of sialic acid did not correlate with the types of modules and the size of MWCO.

Numerical simulation of gasification of coal-water slurry for production of synthesis gas in a two stage entrained gasifier (2단 분류층 가스화기에서 합성가스 생성을 위한 석탄 슬러리 가스화에 대한 수치 해석적 연구)

  • Seo, Dong-Kyun;Lee, Sun-Ki;Song, Soon-Ho;Hwang, Jung-Ho
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.11a
    • /
    • pp.417-423
    • /
    • 2007
  • Oxy-gasification or oxygen-blown gasification, enables a clean and efficient use of coal and opens a promising way to CO2 capture. The coal gasification process of a slurry feed type, entrained-flow coal gasifier was numerically predicted in this paper. The purposes of this study are to develop an evaluation technique for design and performance optimization of coal gasifiers using a numerical simulation technique, and to confirm the validity of the model. By dividing the complicated coal gasification process into several simplified stages such as slurry evaporation, coal devolatilization, mixture fraction model and two-phase reactions coupled with turbulent flow and two-phase heat transfer, a comprehensive numerical model was constructed to simulate the coal gasification process. The influence of turbulence on the gas properties was taken into account by the PDF (Probability Density Function) model. A numerical simulation with the coal gasification model is performed on the Conoco-Philips type gasifier for IGCC plant. Gas temperature distribution and product gas composition are also presented. Numerical computations were performed to assess the effect of variation in oxygen to coal ratio and steam to coal ratio on reactive flow field. The concentration of major products, CO and H2 were calculated with varying oxygen to coal ratio (0.2-1.5) and steam to coal ratio(0.3-0.7). To verify the validity of predictions, predicted values of CO and H2 concentrations at the exit of the gasifier were compared with previous work of the same geometry and operating points. Predictions showed that the CO and H2 concentration increased gradually to its maximum value with increasing oxygen-coal and hydrogen-coal ratio and decreased. When the oxygen-coal ratio was between 0.8 and 1.2, and the steam-coal ratio was between 0.4 and 0.5, high values of CO and H2 were obtained. This study also deals with the comparison of CFD (Computational Flow Dynamics) and STATNJAN results which consider the objective gasifier as chemical equilibrium to know the effect of flow on objective gasifier compared to equilibrium. This study makes objective gasifier divided into a few ranges to study the evolution of the gasification locally. By this method, we can find that there are characteristics in the each scope divided.

  • PDF