• Coupled systems mechanics
• /
• v.8 no.4
• /
• pp.339-350
• /
• 2019

A numerical simulation of the incompressible multiphase hydraulic jump flow was performed to compare the interface prediction through the use of the three RANS turbulence models: $k-{\varepsilon}$, $RNGk-{\varepsilon}$ and SST $k-{\omega}$. A three dimensional no submerged hydraulic jump and a two dimensional submerged hydraulic jump were modeled. Both the geometry and the mesh were created using the open source Gmsh code. The project's geometry consists of a rectangular channel with length and height differences between the two dimensional and three dimensional simulations. Uniform hexahedral cells were used for the mesh. Three refining meshes were constructed to allow to verify simulation convergence. The Volume of Fluid (abbr. VOF) method was used for treatment of the air-water surface. The turbulence models were evaluated in three distinct set up configurations to provide a greater accuracy in the flow representation. In the two-dimensional analysis of a submerged hydraulic jump simulation, the turbulence model RNG RNG $k-{\varepsilon}$ provided a better interface adjust with the experimental results than the model $k-{\varepsilon}$ and SST $k-{\omega}$. In the three-dimensional simulation of a no-submerged hydraulic jump the k-# showed better results than the SST $k-{\omega}$ and RNG $k-{\varepsilon}$ capturing the height and length of the ledge with a better fit with the experimental results.

• Journal of Korean Society on Water Environment
• /
• v.36 no.6
• /
• pp.621-635
• /
• 2020

Water quality models are scientific tools that simulate and interpret the relationship between physical, chemical and biological reactions to external pollutant loads in water systems. They are actively used as a key technology in environmental water management. With recent advances in computational power, water quality modeling technology has evolved into a coupled three-dimensional modeling of hydrodynamics, water quality, and ecological inputs. However, there is uncertainty in the simulated results due to the increasing model complexity, knowledge gaps in simulating complex aquatic ecosystem, and the distrust of stakeholders due to nontransparent modeling processes. These issues have become difficult obstacles for the practical use of water quality models in the water management decision process. The objectives of this paper were to review the theoretical background, needs, and development status of water quality modeling technology. Additionally, we present the potential future directions of water quality modeling technology as a scientific tool for national environmental water management. The main development directions can be summarized as follows: quantification of parameter sensitivities and model uncertainty, acquisition and use of high frequency and high resolution data based on IoT sensor technology, conjunctive use of mechanistic models and data-driven models, and securing transparency in the water quality modeling process. These advances in the field of water quality modeling warrant joint research with modeling experts, statisticians, and ecologists, combined with active communication between policy makers and stakeholders.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2021

In this paper, the design method for a high-sensitivity compact resonator for chipless RFID tags is proposed. Proposed high-sensitivity compact resonator uses an interdigital-capacitor structure instead of a capacitor-shaped strip structure in a conventional ELC resonator. The length of the electrode plate of the IDC structure is longer than that of the conventional capacitor-shaped structure, resulting in a larger equivalent capacitance of the resonator. This can lower the resonant peak frequency of the RCS characteristic. Two resonators with the same length of the square loop and the width of the strip are fabricated on an RF-301 substrate with a thickness of 0.8 mm. The experiment results show that the resonant peak frequency and value of the bistatic RCS for the ELC resonator were 4.305 GHz and -30.39 dBsm, whereas those of the proposed IDC resonator were 3.295 GHz and -36.91 dBsm. Therefore, the size of the resonator is reduced by 23.5% based on the measured resonant peak frequency of the RCS characteristic.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.1-22
• /
• 2022

We provide a detailed description of the installation and operation of a remote spectroscopic meteor observation system at Unjangsan optical astronomy observatory. Three light-sensitive charge-coupled device cameras were installed, and two cameras had a diffraction grating attached to the front of the lens. Station employ sensitive "Watec-902H2" cameras in combination with f/1.2 lenses were installed in November 2019. Diffraction gratings for spectral observations were used at 500 l/mm. Observations were conducted from November 2019 to June 2020. We employed the SonotaCo UFO software suite for meteor detection. Subsequently, meteor spectra were analyzed using field-tested RSpec software. To analyze the observation images, astronomical calibration and photometric calibration were performed, and the chemical elements of the meteor were determined. The study results are presented along with the system setup installation and operation experience. Brief information regarding the origin of the meteor was also provided based on the results.

• Journal of Information Technology Services
• /
• v.20 no.6
• /
• pp.107-123
• /
• 2021

Recently, there have been a number of researchers in the field of education who are actively exploring the educational applications of Blockchain technology, even though it is still in its infancy. Some researchers have been investigating its application in educational administration to issue academic credentials' or maintain student records with distributed ledger, which is the basis of Blockchain technology. Whereas, others have been examining its application in redesigning learning systems that are being used in various contexts, including online learning and lifelong education. In that vein, this paper aims to discuss a liberal arts education system which will be supported by Blockchain-based 'smart contracts'. At present, active efforts are being made to innovate liberal arts education in Korea, centered around government-funded university innovation projects and there have been reports of great achievements. However, if the Blockchain technology is applied to innovating the liberal arts education, we will innovate not only the liberal arts education but also university education as a whole. In this paper, there are suggestions on how to build a learner-centered educational environment where a liberal arts education system is supported by Blockchain-based smart contracts. First of all, the current innovation in liberal arts education and its limitations are discussed, followed by ways in which Blockchain-based smart contracts can reframe the liberal arts education system. Last but not least, the paper addresses implications of the Blockchain technology applications in liberal arts education, along with their future prospects.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.8
• /
• pp.17-22
• /
• 2022

To reduce the bump of bridge/earthwork transition area caused by the settlement of the soft ground during public use, the road agencies have been continuously overlay or repavement at those areas. In this study, the vehicle-mounted ground penetrating radar with 1GHz air-coupled antenna was used to estimate the settlement amount of those areas for nine bridges built in the soft ground. Results shows that it is possible to effectively measure the thickness of pavement up to a depth of 1 m on an asphalt road with ground penetrating radar technology that can inspect under the road surface. Distinctively deformation of the road surface, the variation in the thickness of the pavement measured at bridge/earth transition areas is equivalent to a minimum of 50 mm and a maximum of 600 mm, and there is a risk of cavity in the ground. The difference in the increased pavement thickness is 50~250 mm for each bridge connection, which may cause the differential settlement. In this study, by using the result of the ground penetration radar, a plan for improving drivability and maintenance of the settlement is suggested and applied to the field.

• Journal of Fashion Business
• /
• v.25 no.2
• /
• pp.98-109
• /
• 2021

The purpose of this study was to present the case of class operation by paralleling a general instructor's lecture class and a IC-PBL class in a fashion design major course and comparing the educational effects. The teaching model of this study was designed to improve the ability to use the knowledge gained in accordance with the needs of the industrial field and to develop an independent learning ability. It will provide meaningful data. This study measured and considered the qualitative items of self-efficacy and changes in class perception through interviews and questionnaires completed by the learners after experiencing each general class and IC-PBL class. The results of this study are, first, that in the History of Fashion and Costume class, the general teaching method and the IC-PBL teaching method were applied in parallel to design a class, and a method case was presented. Second, as a result of comparing the educational effects of the two teaching methods through a student questionnaire, IC-PBL was more effective in improving learning attitude, learning achievement and self-efficacy. In addition, after the IC-PBL class on History of Fashion and Costume, the students' negative perception of team activities improved, and the students' cooperative ability and creativity improved.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.433-445
• /
• 2021

Artificial ground freezing (AGF) is a commonly used geotechnical support technique that can be applied in any soil type and has low environmental impact. Experimental and numerical investigations have been conducted to optimize AGF for application in diverse scenarios. Precise simulation of groundwater flow is crucial to improving the reliability these investigations' results. Previous experimental research has mostly considered horizontal seepage flow, which does not allow accurate calculation of the groundwater flow velocity due to spatial variation of the piezometric head. This study adopted vertical seepage flow-which can maintain a constant cross-sectional area-to eliminate the limitations of using horizontal seepage flow. The closure time is a measure of the time taken for an impermeable layer to begin to form, this being the time for a frozen soil-ice wall to start forming adjacent to the freeze pipes; this is of great importance to applied AGF. This study reports verification of the reliability of our experimental apparatus and measurement system using only water, because temperature data could be measured while freezing was observed visually. Subsequent experimental AFG tests with saturated sandy soil were also performed. From the experimental results, a method of estimating closure time is proposed using the inflection point in the thermal conductivity difference between pore water and pore ice. It is expected that this estimation method will be highly applicable in the field. A further parametric study assessed factors influencing the closure time using a two-dimensional coupled thermo-hydraulic numerical analysis model that can simulate the AGF of saturated sandy soil considering groundwater flow. It shows that the closure time is affected by factors such as hydraulic gradient, unfrozen permeability, particle thermal conductivity, and freezing temperature. Among these factors, changes in the unfrozen permeability and particle thermal conductivity have less effect on the formation of frozen soil-ice walls when the freezing temperature is sufficiently low.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.72-77
• /
• 2021

The radial distribution of etch rate was analyzed using the ion energy flux model in VHF-CCP. In order to exclude the effects of polymer passivation and F radical depletion on the etching. The experiment was performed in Ar/SF6 plasma with an SF6 molar ratio of 80% of operating pressure 10 and 20 mTorr. The radial distribution of Ar/SF6 plasma was diagnosed with RF compensated Langmuir Probe(cLP) and Retarding Field Energy Analyzer(RFEA). The radial distribution of ion energy flux was calculated with Bohm current times the sheath voltage which is determined by the potential difference between the plasma space potential (measured by cLP) and the surface floating potential (by RFEA). To analyze the etch rate uniformity, Si coupon samples were etched under the same condition. The ion energy flux and the etch rate show a close correlation of more than 0.94 of R² value. It means that the etch rate distribution is explained by the ion energy flux.

• Atmosphere
• /
• v.33 no.2
• /
• pp.155-171
• /
• 2023

This paper aims to examine from various perspectives how domestic research studies and projects related to climate change have been conducted to mark the 60th anniversary of the Korean Meteorological Society (KMS). The 『50-year History of the Korean Meteorological Society』, published more than a decade ago, has never dealt with the history of development of individual fields of meteorology such as climate change. Therefore, it is of significance to look at the history of research activities and studies achieved by KMS members in the area of climate change over the past 60 years. The research on climate change in KMS is classified by era from the beginning to the latest and the contents are examined by major research projects at that time. During the past 60 years, climatological research in KMS has been mainly focused on general climate, synoptic climate, and applied climate (urban climate) until the 2000s. However, since the 1990s, climate change has become an important area for climate research. The 2000s are the beginning era of climate change research, since the major projects and researches for climate change has begun in the period. The 2010s can be a time when climate change prediction and monitoring are expanded and refined to meet the rapidly increasing demands for climate information from a wide range of areas. We concluded that the development of the research capabilities of the society over the past 60 years, in particular in the past two decades, in the field of climate change research is remarkable.