Railway signal interlocking device with the reverse unit control device which is most important from country season, the subway and the high-speed railroad back, electric relay boarding and lodging accomplishes the master and servant and it comes and before from the Japanese back and an electronic interlocking device, a zone one interest in updated technology introduction Great Britain, Germany, Sweden and the United States, it quarrels about under developing it puts to practical use even from our country it shows. About reasoning lower our country subway or the country closing up shop stem there is not a possibility of throwing away the impression where the exhibition hall of foreign nation signal system is being turning out. Consequently is enormous a system well expense at the foreign corporation about under paying Oh!, it understands, with difficult always it is exposed to it is an actuality in the accident which is dangerous. In like this point of view first piece which is important securing safety of system from electronic anger of electronic interlocking device.
The purpose of this study was to compared with the properties of commercial polyvinyl siloxane impression materials on the Korean product and the other country one. The materials used in this study were 5 hydrophilic polvinyly siloxane impression materials of light body automixing type (Perfect-F, Handae Chemical, Korea; Examix, GC, Japan; Contrast, VOCO, Germany; Express, 3M, U.S.A; Extrude, Kerr, U.S.A.). Specimens of each impression material were fabricated from a mold with dimensions identical to that specified in ASTM D624-91 and were subjected to tensile lode at 500 mm/min until failure for tear strength. Properties of consistency, strain in compression, recovery from deformation, detail reproduction and linear dimensional change were tested according to the testing methods of the ISO specification no.4823(1992). From this study, the follow ing results were obtained 1. The tear strength values were high ET(3.4kN/m), EP(3.4kN/m), PF(3.0kN/m), CT(3.0kN/m), but the lowest was EM(2.2kN/m)(p<0.05). 2. In the consistency, CT(47 mm) had the highest value, followed by PF(42.1 mm), ET(41.2 mm), and EM(39.6 mm), EP(39.2 mm)(p<0.05). It means more flow that the consistency value is high. 3. The strain in compression values were high followed by EM(5.8%), PF(52%), CT(4.6%), ET(4.1%), EP(2.9%)(p<0.05). 4. In the recovery from deformation, ET(99.95%) and PF(99.90%) had the highest value, followed by EP(99.75%), EM(99.74%) without statistical signification, CT(99.64%) had the lowest value(p<0.05). 5. Detail reproduction reappeared to line $20{\mu}m$ all products. 6. The linear dimensional change was a little shrinked all products. and there were not statistical signification (p>0.05). All products were satisfied the ISO specification.
This paper mainly studies the national impression of college students on South Korea, selects students from some key universities as the target population, and conducts an in-depth investigation from the overall impression of South Korea, diplomatic image, food culture, language culture, tourism, entertainment circle and other aspects. Through a questionnaire survey of Chinese college students, this paper studies the image of South Korea in the eyes of contemporary Chinese college students, including the following aspects: First, Research the current Chinese college students' perception of the overall image of South Korea; Second, it studies the current Chinese college students' perception of the image of South Korea in the diplomatic, language, food, tourism and entertainment circles, and analyzes the internal dimensions of the image of South Korea in the minds of Chinese college students; Third, it studies the current Chinese college students' cognition of the overall image of South Koreans, and analyzes the internal dimensions of the image of South Koreans in the minds of Chinese college students; Fourth, to investigate the evaluation of Chinese college students on the image of South Korea. The survey results are analyzed from the perspectives of all subjects and gender differences, combined with the theories of communication and intercultural communication, and suggestions and prospects for the future development of the national image are made.
The purpose of this study was to establish the causal structural model among brand image and country image associated with consumers' purchase decision of products. The specific objectives were 1) to analyze the effects of brand image on consumers' purchase decision of products, 2) to analyze the effects of country image on consumers' purchase decision of products, 3) to analyze the effects of brand image on country image, 4) to analyze the mediating effects of country image between brand image and consumers' purchase decision of products. The conclusions of this study are as follows: First, companies must have an advantage strategy for brand image along with country image. To this end, a strategy to promote the brand image through various media is effective. Second, it is necessary to find new transformation through the establishment of brand identity at the corporate level so that consumers can have a good impression on the brand image. Third, it is important for companies to make efforts at the level of brand image and country image to provide consumers with information that can increase expectations and actual satisfaction and to build product reputation. In addition, it is necessary to embody brand images and country images into global marketing mix strategies. Fourth, if companies build a brand image that symbolizes a differentiated culture, the brand image can have a positive effect on consumer purchase decisions. Along with this, companies can further increase their positive effects by developing representative brand image contents. Fifth, this study confirmed that the higher the image level of the manufacturing country in a situation where consumers' preferences are diversifying, the more the brand image leads to consumers' purchasing decisions. Therefore, brand managers are required to build a country image suitable for the existing brand image when advertising at the time of product introduction.
The main objective of this study was to investigate the awareness and perception of young professionals in Malaysia, Indonesia, and Vietnam countries on the ASEAN Economic Community (hereafter, AEC). Data from a survey of 575 young professionals, with approximately equal distribution from each country, were collected in June and July 2015. Research findings revealed that the knowledge and understanding of the AEC among the Gen Y professionals were still marginal. Although they lack awareness, young professionals had a good impression and perception of the AEC in connection with important benefits for them individually as well as for their country. Finally, the study revealed that the Gen Y professionals showed some level of optimistic attitude that they could succeed in the AEC as they thought that they were quite well prepared, having sufficient skills to work or to do business in other ASEAN countries.
PURPOSE. The purpose of this study is to assess the accuracy of three intraoral scanners along the complete dental arch and evaluate the feasibility of the assessment methodology for further in vivo analysis. MATERIALS AND METHODS. A specific measurement pattern was fabricated and measured using a coordinate measuring machine for the assessment of control distances and angles. Afterwards, the pattern was placed and fixed in replica of an upper jaw for their subsequent scans (10 times) using 3 intraoral scanners, namely iTero Element1, Trios 3, and True Definition. 4 reference distances and 5 angles were measured and compared with the controls. Trueness and precision were assessed for each IOS: trueness, as the deviation of the measures from the control ones, while precision, as the dispersion of measurements in each reference parameter. These measurements were carried out using software for analyzing 3-dimensional data. Data analysis software was used for statistical and measurements analysis (α=.05). RESULTS. Significant differences (P<.05) were found depending on the intraoral scanner used. Best trueness values were achieved with iTero Element1 (mean from 10 ± 7 ㎛ to 91 ± 63 ㎛) while the worst values were obtained with Trios3 (mean from 42 ± 23 ㎛ to 174 ± 77 ㎛). Trueness analysis in angle measurements, as well as precision analysis, did not show conclusive results. CONCLUSION. iTero Element1 was more accurate than the current versions of Trios3 and True Definition. Importantly, the proposed methodology is considered reliable for analyzing accuracy in any dental arch length and valid for assessing both trueness and precision in an in vivo study.
PURPOSE. The purpose of this study is to present a methodology to evaluate the accuracy of intraoral scanners (IOS) used in vivo. MATERIALS AND METHODS. A specific feature-based gauge was designed, manufactured, and measured in a coordinate measuring machine (CMM), obtaining reference distances and angles. Then, 10 scans were taken by an IOS with the gauge in the patient's mouth and from the obtained stereolithography (STL) files, a total of 40 distances and 150 angles were measured and compared with the gauge's reference values. In order to provide a comparison, there were defined distance and angle groups in accordance with the increasing scanning area: from a short span area to a complete-arch scanning extension. Data was analyzed using software for statistical analysis. RESULTS. Deviations in measured distances showed that accuracy worsened as the scanning area increased: trueness varied from 0.018 ± 0.021 mm in a distance equivalent to the space spanning a four-unit bridge to 0.106 ± 0.08 mm in a space equivalent to a complete arch. Precision ranged from 0.015 ± 0.03 mm to 0.077 ± 0.073 mm in the same two areas. When analyzing angles, deviations did not show such a worsening pattern. In addition, deviations in angle measurement values were low and there were no calculated significant differences among angle groups. CONCLUSION. Currently, there is no standardized procedure to assess the accuracy of IOS in vivo, and the results show that the proposed methodology can contribute to this purpose. The deviations measured in the study show a worsening accuracy when increasing the length of the scanning area.
The purpose of this study is to examine the effects which applies teaching program that search solution to prevent global warming in middle school gifted class. This program of total 10 class was theoretical and experimental class and the students presented after collecting the synthetic data about climate-change and roleplayed what they debated to firm their country's opinion about Kyoto Protocol. Finally, students as policymaker made mock Kyoto Protocol by discussion. Impression papers and images about climate-changes was made by students in last class. In discussion of making up mock Kyoto Protocol, developed and developing nations had an argument about carbon dioxide emissions because of their economic benefits. In the course of allocating mutual $CO_2$ reduction, they needed yield and negotiation among nations. Although they mainly took passive position about $CO_2$ reduction, atmosphere that all the country make greater effort for the future global environment was formed. Like this, students had more concepts over climate change by making mock Kyoto Protocol. And they could equipped global scientific literacy and responsibility by participating in social decision making process of solving global environmental issues.
과거 연구들은 원산지(COO)효과의 존재여부에 주목하였으나, 본 연구는 사회판단이론(social judgeability theory)을 적용하여, 어떤 상황에서 원산지(COO)가 소비자의 제품평가에 영향을 미치는지를 연구하였다. 두 개의 실험결과에 의하면, 단지 어느 나라에서 자동차가 만들어졌다는 정보(COO only information)만으로는 제품에 대한 평가에 영향을 미치지 않고, 그 차를 만든 나라와 그 차를 만든 기업의 이름(product-specific information)이 제시될 때, 응답자들은 원산지 효과를 활용할 수 있는 충분한 근거(단서)를 가졌다고 느끼고, 또한 응답자들이 사회의 공통적인 판단 기준(socially shared criteria of validity)에 부합하여 판단하여야 하는 동기를 부여 받았을 때, 원산지 효과가 제품 평가에 유의한 영향을 미치는 것으로 나타났다. 특히, 각 실험 결과는 단순히 원산지 평가성향으로만 소비자 평가가 이루어지는 것이 아니라 원산지 평가성향에 영향을 미치는 정보의 제시방법이 영향을 미친다는 사실을 보여주었다. 이러한 결과는 향후 인상형성 모델의 틀 안에서 좀 더 논의되어야 할 것이다.
본 연구에서는 규범적 사회의 영향이 강한 동북아시아 문화권에서 SNS 이모티콘 소통의 특징을 찾아 전통 인문사상을 기반으로 이 특징들을 해석하고자 하였다. 국가별 주류 SNS가 상이하므로, 구체적으로 중국의 위챗(Wechat)을 중심으로 이모티콘 사용에 있어서 동기요인을 도출하고, 도출된 요인에 대해 해석을 진행하였다. 연구 진행을 위해, 문헌연구와 21명에게 인터뷰를 진행하여 38개 사용동기 항목을 도출하고, 272명에게 이모티콘 이용동기에 대한 조사를 진행하였다. 연구 결과는 다음과 같다. 첫째, 위챗의 이모티콘 사용동기로 6개의 요인들이 도출되었으며 각 요인들을 감정 표현, 심미성, 유용성, 인상관리, 재미, 소속감으로 명명하였다. 둘째, 위챗 이모티콘 사용의 동기요인들 중 규범적 사회의 특징에 부합하는 '인상관리'와 '소속감' 요인을 중심으로 유가의 인문정신인 '화(和)'와 '예(禮)'사상이 이모티콘 사용에 있어서 어떻게 발현이 되는지에 대해 해석하였다. '화(和)'는 이모티콘을 이용하여 대화방에서의 소속감을 강화하고 적극적으로 자신의 존재를 부각하여 소통 과정에 잘 어우러지고자 하는 '소속감' 요인에서 나타난다. '예(禮)'는 도덕적 윤리 규범을 강조하는 것으로, 도덕적 윤리 규범에 적합한 자신의 이미지를 형성하고 이를 통해 보다 나은 관계를 조성하고 유지하는 '인상관리' 요인에서 나타난다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.