• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.423-446
• /
• 1993

Titanium and its alloys are finding increasing use in medical devices and dental implants. The strong selling point of titanium is its resistance to the highly corrosive body fluids in which an implant must survive. This corrosion resistance is due to a tenacious passive oxide or film which exists on the metal's surface and renders it passive. Potentiodynamic polarization measurement is one of the most commonly used electro-chemical methods that have been applied to measure corrosion rates. And the potentiodynamic polarization test supplies detailed information such as open circuit, rupture, and passivation potential. Furthermore, it indicates the passive range and sensitivity to pitting corrosion. This study was designed to compare the corrosion resistance of the commonly used dental implant materials such as CP Ti, Ti-6A1-4V, Co-Cr-Mo alloy, and 316L stainless steel. And the effects of galvanic couples between titanium and the dental alloys were assessed for their useful-ness-as. materials for superstructure. The working electrode is the specimen , the reference electrode is a saturated calomel electrode (SCE), and the counter electrode is made of carbon. In $N_2-saturated$ 0.9% NaCl solutions, the potential scanning was performed starting from -800mV (SCE) and the scan rate was 1 mV/sec. At least three different polarization measurements were carried out for each material on separate specimen. The galvanic corrosion measurements were conducted in the zero-shunt ammeter with an implant supraconstruction surface ratio of 1:1. The contact current density was recorded over a 24-hour period. The results were as follows : 1. In potential-time curve, all specimens became increasingly more noble after immersion in the test solution and reached between -70mV and 50mV (SCE) respectively after 12 hours. 2. The Ti and Ti alloy in the saline solution were most resistant to corrosion. They showed the typical passive behavior which was exhibited over the entire experimental range. Therefore no breakdown potentials were observed. 3. Comparing the rupture potentials, Ti and Ti alloy had the high(:st value (because their break-down potentials were not observed in this study potential range ) followed by Co-Cr-Mo alloy and stainless steel (316L). So , the corrosion resistance of titanium was cecellent, Co-Cr-Mo alloy slightly inferior and stainless steel (316L) much less. 4. The contact current density sinks faster than any other galvanic couple in the case of Ti/gold alloy. 5. Ag-Pd alloy coupled with Ti yielded high current density in the early stage. Furthermore, Ti became anodic. 6. Ti/Ni-Cr alloy showed a relatively high galvanic current and a tendency to increase.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.43-49
• /
• 2016

In this study, equivalent dose and LET (Linear Energy Transfer) calibration of CR-39 SSNTD (Solid State Nuclear Track Detector) were performed using 400 MeV/u C heavy ions in HIMAC (Heavy Ion Medical Accelerator in Chiba) for high LET radiation therapy. The irradiated CR-39 SSNDTs were etched according the etching condition of JAXA (Japan Aerospace Exploration Agency). And the etched SSNTDs were analyzed by using Image J. Determined frequency mean dose (${\bar{y_D}}$)and dose-mean lineal energy (${\bar{y_F}}$)of 400 MeV/u C are about 8.5keV/mm and 10.1 keV/mm, respectively by using the CR-39 SSNTD. This value is very similar to the results calculated by GEANT4 Monte Carlo simulation and measured with TEPC (Tissue Equivalent Proportional Counter) active radiation detector. We could determine the equivalent dose and LET calibration factors of CR-39. And we confirmed that the CR-39 SSNTD was useful for high LET radiation dosimetry in hadron radiotherapy.

• Korean Security Journal
• /
• no.61
• /
• pp.235-254
• /
• 2019

This study identifies a factor structure regarding the criterion of terror awareness by using confirmatory factor analysis. The study provides information whether the criterion fits in the analysis of terror awareness in Korea or not. Data of 176 public officials working at the National Assembly collected in 「Study on the Improvement of Security in the National Assembly Building」(Choi O-Ho and others, 2016) was used in the analysis. Study results showed the fit statistics of 3 questions regarding concern in terror, 5 questions regarding cognition of terror occurrence, 3 questions regarding countermeasure of terror, and 3 questions regarding equipments against terror satisfied the standard. Also, standard regression coefficient exceeded the standard and was shown to be fit. Concern in terror, as a latent variable, was below the standard value of average variance extracted. However, focused validity was secured by obtaining other values fit. This study proceeded distinct validation test to supplement data. The test results showed that the criterion level was fit. Thus, further survey should include questions that are appropriate to measure the awareness of terror based not only on theories and previous studies but also on questions of terror awareness tested in this study. Such development in surveys will support the means of data measurement.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.24-35
• /
• 2020

This study aims to identify the relationship between termite-damaged cultural heritage sites and the 'Forest Tending Project' based on a comprehensive survey of the status of damage caused by termites and of the Forest Tending Project. It was observed that the Forest Tending Project started in 2004 as a five-year policy project covering over 59% of the nation's forests, which showed the maximum value in 2009 and then gradually decreased. Since then, increased damage to national cultural heritage sites by termites has been confirmed and counter measures have been expanded since 2012. Also, as a result of the National Research Institute of Cultural Heritage surveying the status of termite damage in national cultural heritage sites over these six years, it was identified that about 98% of investigated cultural heritage sites were damaged by termites, about 78% of them were adjacent to forests, and that all 46 national cultural heritage sites which had been included in the 2008 Forest Fire Prevention Cultural Heritage Afforestation Project were damaged by termites. Therefore, it is claimed that the number of termite-damaged cultural heritage sites has increased after an extensive Forest Tending Project was applied on a national scale, and it seems that all cultural heritage areas close to forests are particularly subject to termite-damage due to the number of tree stumps and lumber byproducts which can serve as habitats for the pests.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.99-99
• /
• 2013

In this talk, I will present two research works in progress, which are: i) mapping of piezoelectric polarization and associated charge density distribution in the heteroepitaxial InGaN/GaN multi-quantum well (MQW) structure of a light emitting diode (LED) by using inline electron holography and ii) in-situ observation of the polarization switching process of an ferroelectric Pb(Zr1-x,Tix)O3 (PZT) thin film capacitor under an applied electric field in transmission electron microscope (TEM). In the first part, I will show that strain as well as total charge density distributions can be mapped quantitatively across all the functional layers constituting a LED, including n-type GaN, InGaN/GaN MQWs, and p-type GaN with sub-nm spatial resolution (~0.8 nm) by using inline electron holography. The experimentally obtained strain maps were verified by comparison with finite element method simulations and confirmed that not only InGaN QWs (2.5 nm in thickness) but also GaN QBs (10 nm in thickness) in the MQW structure are strained complementary to accommodate the lattice misfit strain. Because of this complementary strain of GaN QBs, the strain gradient and also (piezoelectric) polarization gradient across the MQW changes more steeply than expected, resulting in more polarization charge density at the MQW interfaces than the typically expected value from the spontaneous polarization mismatch alone. By quantitative and comparative analysis of the total charge density map with the polarization charge map, we can clarify what extent of the polarization charges are compensated by the electrons supplied from the n-doped GaN QBs. Comparison with the simulated energy band diagrams with various screening parameters show that only 60% of the net polarization charges are compensated by the electrons from the GaN QBs, which results in the internal field of ~2.0 MV cm-1 across each pair of GaN/InGaN of the MQW structure. In the second part of my talk, I will present in-situ observations of the polarization switching process of a planar Ni/PZT/SrRuO3 capacitor using TEM. We observed the preferential, but asymmetric, nucleation and forward growth of switched c-domains at the PZT/electrode interfaces arising from the built-in electric field beneath each interface. The subsequent sideways growth was inhibited by the depolarization field due to the imperfect charge compensation at the counter electrode and preexisting a-domain walls, leading to asymmetric switching. It was found that the preexisting a-domains split into fine a- and c-domains constituting a $90^{\circ}$ stripe domain pattern during the $180^{\circ}$ polarization switching process, revealing that these domains also actively participated in the out-of-plane polarization switching. The real-time observations uncovered the origin of the switching asymmetry and further clarified the importance of charged domain walls and the interfaces with electrodes in the ferroelectric switching processes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.76-86
• /
• 2016

SQL Injection attacks are the most widely used and also they are considered one of the oldest traditional hacking techniques. SQL Injection attacks are getting quite complicated and they perform a high portion among web hacking. The big data environments in the future will be widely used resulting in many devices and sensors will be connected to the internet and the amount of data that flows among devices will be highly increased. The scale of damage caused by SQL Injection attacks would be even greater in the future. Besides, creating security solutions against SQL Injection attacks are high costs and time-consuming. In order to prevent SQL Injection attacks, we have to operate quickly and accurately according to this data analysis techniques. We utilized data analytics and machine learning techniques to defend against SQL Injection attacks and analyzed the execution plan of the SQL command input if there are abnormal patterns through checking the web log files. Herein, we propose a way to distinguish between normal and abnormal SQL commands. We have analyzed the value entered by the user in real time using the automated SQL Injection attacks tools. We have proved that it is possible to ensure an effective defense through analyzing the execution plan of the SQL command.

• Cross-Cultural Studies
• /
• v.45
• /
• pp.85-107
• /
• 2016

Cho Ji-hoon was a leading figure on the discussion of recognition on Han Yong-un, particularly the post-liberation period. During the Japanese colonial era, he addressed Han Yong-un as the representative of national poet, and evaluated Han's poems as the models of rebellious nationalistic poetry. Such evaluation by Cho set the precedent of basic perspectives and methodologies on how to recognize Han Yong-un in the present day. This paper analyzes three studies on Han Yong-un, conducted by Cho ji-hoon. We also examine how Cho created his logic of recognizing Han as a national poet, and his poems as nationalistic poetry. Accordingly, this paper has separated recognitions on poet studies and work studies, and further explored how each recognition has consistency with Cho ji-hoon's historical and literary perception. As a result, the following has been concluded: the basis of Cho ji-hoon's recognition on the life and works of Han Yong-un was premised on Cho's understanding of the world from a standpoint of history of ideas, the concept of nation was regarded as an absolute value that binds disparate ideas together, and the combination of nationalism and poetry has been expressed through the logic of nationalistic poetry and the notion which equalizes the poet to a classical scholar. It was further concluded that such equalizing logic contains some logical contradictions derived from integration between universal rights and national sovereignty, and nation and Buddhism. Therefore, it can be said that other possible interpretations on the role of a poet were not fully discussed, but remain bounded. Last but not the least, this paper critically tries to perceive Cho's recognition on Han Yong-un, and accentuates the necessity of new interpretations of Han's poems, apart from those based on nationalism.

• Particle and aerosol research
• /
• v.16 no.4
• /
• pp.131-140
• /
• 2020

Air pollutants emitted from chimneys of coal-fired power plants are considered to be a major source of fine particulate matter in the atmosphere. In order to manage fine particle in the chimney of a coal-fired power plant, it is necessary to know the concentration of fine particle emitted in real time, but the current system is difficult. In this study, a real-time measurement system for chimney fine particle was developed, and measurements were performed on six coal-fired power plants. Through the measurements, the mass concentration distribution according to the particle size could be secured. All six chimneys showed bimodal distribution, and the count median diameters of each mode were 0.5 and 1.1 ㎛. In addition, it was compared with the gravimetric measurement method, and it was determined that the relative accuracy for PM10 was within 20%, and the value measured using the developed measuring instrument was reliable. Finally, three power plants were continuously measured for one month, and as a result of comparing the concentration of PM10 according to the amount of power generation, it was confirmed that the PM10 discharged from the chimney increased in the form of an exponential function according to the amount of power generation.

• Korea Trade Review
• /
• v.41 no.2
• /
• pp.231-250
• /
• 2016

The study attempts to consider L/G(Letter of Guarantee) in a different angle, which is internationally used as a way of commercial customs and practices in a case when the consignee wants to receive the goods without the original Bill of Lading, Thus, this study focuses more on verifying the usage of L/G in Mixed Payment System and the range of guarantee responsibility by an issuing bank through case analysis. This case uses a mixed payment method of L/C(Letter of Credit) and T/T(Telegraphic Transfer) in the transaction of goods. The issuing bank of L/C issues L/G with the amount of L/C which is the same as the amount as C/I(Commercial Invoice). However the carrier deliver all goods laden under both L/C and T/T payment with the production of L/G. In this case, because the buyer is unable to pay, the seller makes a claim for damages to the carrier that the carrier delivers the goods to the buyer against L/G. Finally, the judge gives a decision that the issuing bank of L/G should pay the whole amount of the goods. In this case, the main issue of the dispute is the range of guarantee responsibility by the issuing bank of L/G. As a result of the case analysis, the study suggests two counter strategies for smooth utilization in international trade environment. First, in the case of mixed payment system, a seller should issue a commercial invoice separately based on the amount of each settlement plan in order to clarify the liability of guarantee. Second, banks should establish a new form for L/G including a sentence for verifying liabilities of the bank's side in the current form of L/G.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.1
• /
• pp.61-68
• /
• 2001

Purpose: The C-14 urea breath test (C-14 UBT) is the most specific noninvasive method to detect Helicobacter (H) pylori infection. We investigated if the C-14 UBT can reflect the presence and degree of H. pylori detected by gastroduodenoscopic biopsies (GBx). Materials and methods: One hundred fifty patients (M:F=83:67, age $48.6{\pm}11.2$ yrs) underwent C-14 UBT, rapid urease test (CLO test) and GBx on the same day. For the C-14 UBT, a single breath sample was collected at 10 minutes after ingestion of C-14 urea (137 KBq) capsule and counting was done in a liquid scintillation counter for 1 minute, and the results were classified as positive (${\geq}200dpm$), Intermediate ($50{\sim}199dpm$) or negative (<50 dpm). The results of CLO tests were classified as positive or negative according to color change. The results of GBx on giemsa stain were graded 0 (normal) to 4 (diffuse) according to the distribution of H. pylori by the Wyatt method. We compared C-14 UBT results with GBx grade as a gold standard. Results: In the assessment of the presence of H. pylori infection, the C-14 UBT global performance yielded sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and accuracy of 92.5%, 88.4%, 97.1%, 88.4% and 91.3%, respectively. However, the CLO test had sensitivity, specificity, PPV, NPV and accuracy of 83.2%, 81.4%, 91.8%, 81.4% and 82.7%, respectively. The quantitative values of the C-14 UBT were $45{\pm}27$ dpm in grade 0, $707{\pm}584dpm$ in grade 1, $1558{\pm}584dpm$ in grade 2, $1851{\pm}604dpm$ in grade 3, and $2719{\pm}892dpm$ in grade 4. A significant correlation (r=0.848, p<0.01) was found between C-14 UBT and the grade of distribution of H. pylori infection on GBx with giemsa stain. Conclusion: We conclude that the C-14 UBT is a highly accurate, simple and noninvasive method for the diagnosis of ongoing H. pylori infection and reflects the degree of bacterial distribution.