• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.156-162
• /
• 2004

In this paper, a technique that estimate the optimal capacity of the solar-wind hybrid power system for minimizing the total monthly electric power expenses is presented. The hybrid power system is assumed to be operated in connection with the utility power system and electric bill be paid for the power not covered by the hybrid system generation. Monthly generation cost is estimated based on total life-cycle cost analysis. The monthly utility power bill is assumed to be increased quadratically in proportion with the net utility power consumption which is the difference between the total monthly load minus the hybrid system generations. Test results demonstrate applications potential of the proposed technique.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1531-1535
• /
• 2008

In the past vertically integrated power system, the power utility forecasted power demand and invested new power plants to keep a system adequacy. However, in the competitive electricity markets, a principle part of the capacity investment is market participants who decided the investment to maximize their profit. Especially, one of the main factors in their long-term decision making is the retrieval of fixed costs (construction costs). This paper presents the capacity payment in electricity power markets. The capacity payment (CP) in Cost Based Pool (CBP) is needed to recover fixed costs. However, CP in CBP was applied not only recovering fixed costs but also ensuring supply reliability. In order to operate harmonious power markets, pool needs reasonable CP mechanism. This paper analysis CP using capacity proportion and Reliability Pricing Model (RPM).

• Journal of Home Health Care Nursing
• /
• v.20 no.2
• /
• pp.141-151
• /
• 2013

Purpose: The purpose of this study was to examine the economic effectiveness of by conducting a literature review of published articles, masters theses, and doctoral dissertations. Method: Prior to the literature review, inclusion-exclusion criteria were established. We then reviewed 1,029 CINAHL, MEDLINE, and Cochrane DB papers, and 153 RISS papers collected between Results: A total of 12 studies met the inclusion-exclusion criteria.-effectiveness: 6 cost-effectiveness studies, 1 cost-utility studies, and 5 cost-benefit studies. Each of the 12 reviewed studies concluded that home care nursing had greater economic benefits than other compared healthcare services. Conclusion: Home care nursing has significant economic benefits in multi health care service settings and for various patient groups. Therefore these results will be used a critical evidence for the development of economically effective home based health care systems for future policy making.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.1
• /
• pp.83-89
• /
• 2019

Objective : This study is a retrospective cost-benefit analysis of cervical anterior interbody fusion and cervical artificial disc replacement, which are the main surgical methods to treat degenerative cervical disc disease. Methods : We analyzed 156 patients who underwent anterior cervical disc fusion and cervical artificial disc replacement from January 1, 2008 to December 31, 2009, diagnosed with degenerative cervical disc disorder. In this study, the costs and benefits were analyzed by using quality adjusted life year (QALY) as the outcome index for patients undergoing surgery, and a Markov model was used for the analysis. Only direct medical costs were included in the analysis; indirect medical costs were excluded. Data were analyzed with TreeAge Pro $2015^{TM}$ (TreeAge Software, Inc, Williamstown, MA, USA). Results : Patients who underwent cervical anterior fusion had a total cost of KRW 2501807/USD 2357 over 5 years and obtained a utility of 3.72 QALY. Patients who underwent cervical artificial disc replacement received 4.18 QALY for a total of KRW 3685949/USD 3473 over 5 years. The cumulative cost-effectiveness ratio of cervical spine replacement surgery was KRW 2549511/QALY (USD 2402/QALY), which was lower than the general Korean payment standard. Conclusion : Both cervical anterior fusion and cervical artificial disc replacement are cost-effective treatments for patients with degenerative cervical disc disease. Cervical artificial disc replacement may be an effective alternative to obtain more benefits.

• Journal of the Korea Convergence Society
• /
• v.7 no.5
• /
• pp.181-188
• /
• 2016

This study investigated consumer convergence preferences for healthcare information service in social media using the multi-attribute utility theory. The multi-attribute utility theory is an approach for compositional modeling attributes wherein researchers compute the overall service utility by aggregating the evaluation results for attribute values. We found that healthcare information service consumers in social media evaluate the service preference through the multi attributes - Update, Cost, Usefulness, Usability, Reliability. And the study shows that individual preference by estimating weight of each attribute in the services influences the service use intention. So we believe that estimating preferences with multi-attribute utility theory will predict business success of the services in a new media, and for a successful business of the social media services marketers should assess the consumer's preference using the multi-attributes.

• Membrane and Water Treatment
• /
• v.8 no.2
• /
• pp.137-147
• /
• 2017

A water treatment utility in South Korea operates a large system of pressurized hollow fiber membrane (PHFM) modules. The optimal selection of membrane module for the full scale plant was critical issue and carried out using Risk-based Life Cycle Cost (RbLCC) analysis based on the historical data of operation and maintenance. The RbLCC analysis was used in the process of decision-making for replacing aged modules. The initial purchasing cost and the value at risk during operation were considered together. The failure of modules occurs stochastically depending on the physical deterioration with usage over time. The life span of module was used as a factor for the failure of Poisson's probability model, which was used to obtain the probability of failure during the operation. The RbLCC was calculated by combining the initial cost and the value at risk without its warranty term. Additionally, the properties of membrane were considered to select the optimum product. Results showed that the module's life span in the system was ten years (120 month) with safety factor. The optimum product was selected from six candidates membrane for a full scale water treatment facility. This method could be used to make the optimum and rational decision for the operation of membrane water purification facility.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.707-716
• /
• 2009

The role of cost modeller is to facilitate the design process by systematic application of cost factors so as to maintain a sensible and economic relationship between cost, quantity, utility and appearance which thus helps in achieving the client's requirements within an agreed budget. There are a number of research on cost estimates in the early design stage based on the improvement of accuracy or impact factors. It is common knowledge that cost estimates are undertaken progressively throughout the design stage and make use of the information that is available at each phase, through the related research up to now. In addition, Cost estimates in the early design stage shall analyze the information under the various kinds of precondition before reaching the more developed design because a design can be modified and changed in all process depending on clients' requirements. Parametric cost estimating models have been adopted to support decision making in a changeable environment, in the early design stage. These models are using a similar instance or a pattern of historical case to be constituted in project information, geographic design features, relevant data to quantity or cost, etc. OLAP technique analyzes a subject data by multi-dimensional points of view; it supports query, analysis, comparison of required information by diverse queries. OLAP's data structure matches well with multiview-analysis framework. Accordingly, this study implements multi-dimensional information system for case based quantity data related to design information that is utilizing OLAP's technology, and then analyzes impact factors of quantity by the design criteria or parameter of the same meaning. On the basis of given factors examined above, this study will generate the rules on quantity measure and produce resemblance class using clustering of data mining. These sorts of knowledge-base consist of a set of classified data as group patterns, of which will be appropriate stand on the parametric cost estimating method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.609-614
• /
• 2000

This paper is an experimental study of the normal strength concrete beam and high strength concrete beam for the analysis of bending and shear behavior. In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling increase construction cost, the good ceiling system such as beam with opening give to economical merits because of a substantial reduction in materials and construction cost. For the analysis on the mechanical behavior of the reinforced high strength and normal strength concrete beams with circular opening in the web, the stress concentration of the circular opening, crack pattern and reinforcing methods were studied. Twenty test pieces with different reinforcing methods and difference concrete strength were tested and their resisting forces and load deflection curves were defined in this study.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.3 no.3
• /
• pp.13-22
• /
• 1980

Research and Development has a property that involves uncertainity and risk in itself. Therefore, in order to scheduling of R & D activity, it Is needed of a certain probabilistic network technique with due regard to feedback process used to occur in the R & D proceeding. It is GERT that was developed as the need arises . In this study, the network structure of GERT-I and GERT-II was combined and then simulation analysis was used to it. According to that analysis , an advanced GERT model which covers the following stochastic problems was examined. 1 Evaluating success feasibility under the complex condition (time and cost). 2 Selecting acceptance range for the worst. 3. Selecting optimum path on basis of time, cost and success. 4. Evaluating project utility among the project alternatives. It is for managing R&D projects more effectively.

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.48-54
• /
• 2008

This paper analyzes cost tradeoffs between memory usage and computation for window-based operators in data stream environments. It identifies generic operator network constructs, and sets up a cost model for the estimation of the expected memory reduction and the computation overheads when window memory relocations are applied to each operator network construct. This cost model helps to identify the utility of window memory relocations. It also helps to apply window memory relocation to improve a query execution plan to save memory usage. The proposed approach contributes to expand the scope of query processing and optimization in data stream environments. It also provides a basis to develop a cost estimation model for the query optimization using window memory relocations.