• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.155-159
• /
• 1995

For the relationship between conformance cost and the individual elements of non-conformance, an analysis was made of the relationship between inspection cost and training cost and scrap cost. As a result it was explained that there was all a positive correlation between training cost and scrap cost, and between inspection cost and scrap cost. Like this, training and inspection cost and scrap cost have a positive correlation. Judging from the fact that the coefficient of inspection cost is lower than that of training cost in the comparison of the coefficient of each cost, it can be analyzed that the change in scrap cost is influenced by the change in training cost more greatly than the change in inspection cost. If doing so, it can be interpreted that scrap cost and rework cost do not still decrease in spite of increasing in education and training cost and prevention cost. This result may represent the problem as to whether education and training cost is effectively expended for prevention activity. Accordingly, to cope with this situation, it is thought that scrap cost should be cut by establishing the effective prevention measure for causing the increase of scrap cost.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.1
• /
• pp.146-153
• /
• 2010

The physics theory applied to the elliptical health trainers can be a good example in engineering education. From the point of view of the physics education the measurement of mechanical and thermal energy expenditure in elliptical trainers can be related to the muscle activity, quantity of motion, and metabolic cost. We realized that the low speed training is effective for high basal metabolism due to increasing the muscle activity even if the high speed training is effective for training down. Elliptical Trainer may provide an effective oxygen exhaustion and thus effective training down. However, the metabolic cost does not have much relation to the amount of training under the high speed of trainer.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.933-947
• /
• 2020

This study was conducted to develop an effective heparin extraction method by using low-cost and highly effective enzymes from six pig by-products (liver, lung, heart, stomach, small intestine, and large intestine), and analyze their bioavailability. Low-cost and highly effective enzymes (alkaline-AK and papain) and a common enzyme (trypsin) were used for the heparin extraction. The angiotensin I- converting enzyme (ACE) inhibitory activity and the antimicrobial activity of extracted heparin were analyzed to verify their bioavailability. The average amount of heparin extracted per kilogram of pig by-products was 439 mg from the liver, 127 mg from the lung, 398 mg from the heart, 261 mg from the stomach, 197 mg from the small intestine, and 239 mg from the large intestine. Various enzymes were used to extract heparin, and the amount of extracted heparin was similar. Based on 1 g of pig by-product, the enzymes trypsin, papain, and alkaline-AK could extract 1,718 mg, 1,697 mg, and 1,905 mg of heparin, respectively. Heparin extracted from pig by-products showed antihypertensive activity and antimicrobial activity against Staphylococcus aureus at low populations. These results indicated that heparin can be obtained from pig by-products at a low cost.

• Journal of Korean Society for Quality Management
• /
• v.43 no.1
• /
• pp.85-102
• /
• 2015

Purpose: This study is aimed to develope effective guidelines of R&D institute with regard to general management cost, by analyzing the management characteristics of 14 domestic R&D institutes general management costs. Methods: The bootstrapping method is applied to obtain the average general management cost of 14 R&D institute and the effective R&D institutes are presented by comparing the general management costs of R&D and the rate of inflation. Results: The results show that the average R&D general management cost of 14 R&D institutes is 3.32% and, in general, it turns out that the R&D general management costs do not reflect the inflation rate after a comparative analysis of the variation of the R&D general management costs. In addition, the results of cost-effective analysis show that only 5 R&D institutes are efficient in R&D activities. Conclusion: Applying a uniform standard of R&D general management costs although their management characteristics are different, can cause the impediment to the independence and transparency of R&D institutes. Therefore it is recommended a strict implementation with respect to the monitoring system of each R&D institute and the budget policy methods which are reflected management characteristics.

• Advances in Computational Design
• /
• v.3 no.1
• /
• pp.49-69
• /
• 2018

This paper shows an optimal design for reinforced concrete rectangular combined footings based on a criterion of minimum cost. The classical design method for reinforced concrete rectangular combined footings is: First, a dimension is proposed that should comply with the allowable stresses (Minimum stress should be equal or greater than zero, and maximum stress must be equal or less than the allowable capacity withstand by the soil); subsequently, the effective depth is obtained due to the maximum moment and this effective depth is checked against the bending shear and the punching shear until, it complies with these conditions, and then the steel reinforcement is obtained, but this is not guaranteed that obtained cost is a minimum cost. A numerical experimentation shows the model capability to estimate the minimum cost design of the materials used for a rectangular combined footing that supports two columns under an axial load and moments in two directions at each column in accordance to the building code requirements for structural concrete and commentary (ACI 318S-14). Numerical experimentation is developed by modifying the values of the rectangular combined footing to from "d" (Effective depth), "b" (Short dimension), "a" (Greater dimension), "${\rho}_{P1}$" (Ratio of reinforcement steel under column 1), "${\rho}_{P2}$" (Ratio of reinforcement steel under column 2), "${\rho}_{yLB}$" (Ratio of longitudinal reinforcement steel in the bottom), "${\rho}_{yLT}$" (Ratio of longitudinal reinforcement steel at the top). Results show that the optimal design is more economical and more precise with respect to the classical design. Therefore, the optimal design presented in this paper should be used to obtain the minimum cost design for reinforced concrete rectangular combined footings.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.87-98
• /
• 2012

In recent years, there are many data and multimedia services that are supported by WiFi-enabled mobile devices. As a result, the demand for the ability to connect to the Internet anywhere is rapidly increasing and network infrastructure is becoming increasingly important. The design of cost-efficient network mobility (NEMO) protocol is intended to reduce the demand for limited wired/wireless network bandwidth at the signaling of mobility support and packet delivery operations. In this paper, we propose a cost-effective inter-LMA domain mobility management scheme which provides fast handover with multicasting support in NEMO environments. And our Fast PR-NEMO scheme is compared with N-PMIPv6, rNEMO, and PR-NEMO. In conclusion, our proposed scheme shows the best performance in terms of location updating cost, and packet tunneling cost.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.182-186
• /
• 2011

Early cost estimates are important to decision-making for a construction project. Moreover, the possibility of reducing the project cost is getting less as the project is progressed. Case-based reasoning (CBR), which can be viewed as an effective method for early cost estimating, is widely utilized recently. Early cost estimates using CBR have advantages over the traditional ones as they produce reasonable outputs and self-studying is possible by simply adding new cases. Case-based reasoning is composed of a cycle of retrieve, reuse, revise, and retain process. However, in the majority of research cases, they are focused on how to retrieve the similar cases, instead of revising the cases which is expected to increase accuracy results of cost estimation. This research suggests a method of revising retrieved similar cases in a GA-CBR cost model which is widely studied and utilized for early cost estimating recently. To validate the proposed method, case study is conducted based on Korean public apartment projects.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.323-327
• /
• 2008

본 연구는 판형 핀-관 열교환기의 열전달 특성을 상용 CFD 코드인 SC/Tetra를 사용하여 해석한 내용에 관한 것이다. 해석조건은 입구속도 0.63 m/s, 튜브온도 $44.5^{\circ}C$이다. 해석 열교환기는 총6가지로 검토하였으며 각각의 온도분포와 유동패턴을 해석하고 판형 핀-관 열교환기의 열전달 특성을 비교 검토하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.242-245
• /
• 2008

Exchange System for mobile communication operator is very important for providing continuous services to customers. However traditional solution is too expensive for choosing in the real environment. In this paper, we suggest cost-effective auto backup monitoring solution, which is robust for system failure. And this suggested solution will also can be adopted to the $4^{th}$ generation of IP core network.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3208-3213
• /
• 2011

It has regarded an attempt to design and construct more safe structures as challenges such as fate. In order to operate public facilities safely, It can be taken how to improve the resistance to applied load by increasing the cross-section of structural members or by installing reinforcement. But inevitably such a way is accompanied by an increase of construction cost or maintenance cost. To make a cost-effective construction, Reliability-based decision analysis which can judge the adequacy of investment is suggested using statistical data of the load, resistance and the maintenance cost.