• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.99-102
• /
• 2002

This paper discusses the estimation of construction cost of high fluidity concrete using segregation reducing type superplasicizer with 350kgf/cm2 of design strength and 60$\pm$5cm of slump flow in order to verify the cost down effect of high fluidity concrete compared with that of plain concrete with 350kgf/cm2 of design strength and 18cm of slump and with 210kgf/cm2 of design strength and 15cm of slump. According to research, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• 보건행정학회지
• /
• 제9권4호
• /
• pp.65-86
• /
• 1999

In this study, we investigate the welfare effect of mandatory prescription(MP) in Korea. An immediate effect of MP is the increase in the implicit price of prescribed medicine, which could be obtained easily from drug stores before MP. This will lower the quantity demanded. which will in turn reduce the abuse of drugs. The key to the cost-benefit analysis of MP, therefore, should be focused on this point; price increase in the cost side and quantity decrease in the benefit side. Since we do not have as much information as needed for the analysis, however, we made strong assumptions for the clarity of numbers; the severity of moral hazard of medical doctors related to the sales of hospital drugs, constant demand elasticity, constant benefit multiplier of reduced drug usage, and so on, With these rather strong assumptions, we find that i) the benefit side is much more sensitive to demand elasticity than the cost side effect ii) the larger the demand elasticity, the greater the size of net gain of MP, though the result depends on the size of the benefit multiplier. This analysis shows that we need to have more information on the specific institutional path of health benefit diffusion caused by the reduction of drug usage, which was the major target of MP.

• 대한안전경영과학회지
• /
• 제20권3호
• /
• pp.1-9
• /
• 2018

This study is intended to look into the effect of construction safety supervision system on risk control and reduction. To achieve this, a survey was carried out to 114 companies in construction, ordering, contract and management. The overall findings were as follows. The effect of construction safety supervision system on risk control and reduction showed that factors of supervision system, supervision cost and supervision method had a positive effect on risk control and reduction. And their perception of the introduction of safety supervision system in construction sites according to process showed that there was a difference between them according to the field of ordering, contract and supervision. There was the biggest difference between owner and contractor in double supervision system, but no difference between them in the perception of risk reduction. These results show that all ordering, contract and supervision are positively needed for the introduction of construction safety supervision. This means that there is a difference between owner and contractor in the perception of process according to system operation. All companies agree to system improvement by the settlement of safety supervision system for the prevention of safety accidents and safe construction, but the systematic complement of safety supervision is the burden of contractor. And there is a big difference between owner and contractor in the perception of responsibility and concern for cost burden.

• 한국프랜차이즈경영연구
• /
• 제14권3호
• /
• pp.37-52
• /
• 2023

Purpose: This study is to investigate the causal relationship between franchise headquarters' franchise cost and franchise satisfaction and management performance, and to verify the structural relationship between franchise cost and corporate permanence. Research design, data and methodology: The data were collected from 200 medium-sized franchisees in Seoul and analyzed using confirmatory factor analysis (CFA) to test the validity of the measurement model and the structural equation model (SEM) to identify the impact of franchise costs on corporate performance with the Amos 28.0 program. Result: Franchise costs were found to have a negative effect on franchise satisfaction and corporate permanence. It was confirmed that franchise satisfaction had a significant positive effect on management performance and corporate permanence. Franchise costs had a sequential mediating effect on franchise satisfaction and management performance, which had a significant impact on corporate permanence. Conclusions: This study expanded the theoretical scope by applying the expectation confirmation theory to corporate transactions. In addition, the franchise headquarters proposes ways to create a culture of franchise business with trust by presenting appropriate franchise costs to improve management performance and corporate permanence through franchise satisfaction.

• Journal of the Korean Data and Information Science Society
• /
• 제17권2호
• /
• pp.367-377
• /
• 2006

This paper develops a periodic preventive maintenance(PM) policy following the expiration of warranty. Two types of warranty are considered: renewing warranty and non-renewing warranty. Also, we consider the situation where each PM cost is an increasing function of the PM effect. We determine the optimal number of PM's before replacing the system by a new one and the optimal length of period for the periodic PM following the expiration of warranty. Explicit solutions to determine the optimal periodic PM are presented for the Weibull distribution case.

• 경영과학
• /
• 제10권2호
• /
• pp.111-120
• /
• 1993

The most important factors for a product to survive in the market are cost and quality. In recent years, quality proceeds to cost. There are many techniques of use to improve the quality of a product. One of the techniques is applying statistical methods (especially Taguchi method) to real operational conditions for a continuous manufacturing process in P company. There are 91 factors to control in the process. So, we predetermined 7 main effect factors and 6 interactive effect factors by statistical methods and advices of engineers. With these 13 factors, we determined the optimal level of operations for the process.

• 한국시스템다이내믹스연구
• /
• 제8권2호
• /
• pp.5-23
• /
• 2007

According to the system dynamics model of this study, if there is a significant network effect on vehicle operating costs, it is difficult to achieve the shift to AFV even in the long term without a policy intervention because the car market is locked in to the current structure. Network effect can be caused by an increasing return to scale in fuel supply sector as well as in maintenance service sector. It is also related to the fact that the reliability and awareness of consumers on new products increases with the growth of the market share of the new products. There are several possible policy options to break the 'locked in' structure of car market, such as subsidy on vehicle price (capital cost), subsidy on fuel (operating cost) and niche management policy. Combined policy options would be more effective than relying on a single policy option to increase the market share of AFV.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.72-76
• /
• 2007

Since the magnetic bearing system has unstability inherently it is necessary to measure the displacement for stable operation. Normally the displacement measurement is implemented by using sensors. The sensor for the displacement measurement is selected by precision, installation space, effect of magnetic field and response speed. And the cost of displacement measurement sensor also is considered. At the cost the hall effect sensor has a large advantage comparing with the others. Therefore this study concern about the basis experimental test for the displacement measurement of the magnetic bearing system that uses the hall effect sensor coupled with a tiny permanent magnet. The experimental results confirm the validity and practicability for this displacement measurement sensor.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.486-492
• /
• 2012

This paper presents a novel objective function for distribution system reconfiguration for reliability enhancement. When islanding operations of distributed generators is prohibited, faults in the feeder interrupt the operation of distributed generators. For this reason, we include the customer interruption cost as well as the distributed generator interruption cost in the objective function in the network reconfiguration algorithm. The network reconfiguration in which genetic algorithms are used is implemented by MATLAB. The effect of the proposed objective function in the network reconfiguration is analyzed and compared with existing objective functions through case studies. The network reconfiguration considering the proposed objective function is suitable for a distribution system that has a high penetration of distributed generators.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.26-32
• /
• 2001

A simple expected damage cost model is developed and a systematic approach to evaluate the economic effects of seismic hazards to reinforced concrete structures is presented. An expected damage cost function during a specific lifetime is modeled by a Poisson's process with uniform continuous cash flow assumption. It is possible that the proposed method can decouple the damage cost effect from random earthquake events. Thus, expected damage cost function can be formulated as a combination of three independent terms; a present worth factor of Poisson's process, a damage cost interpolation function and a mean occurrence rate of earthquake intensity. The validity of the proposed method is demonstrated by a comparative study of LCC evaluations with the previous study.