• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.108-113
• /
• 2005

The damageability and repairability of similar platform type vehicles could be very concerned with design optimization. In all the vehicles crash tested, small size passenger vehicles were weakness in aspect of damageability and repairability. The most critical area appears to be repair cost considering that parts cost is the largest portion of total repair cost segments. Besides repair cost, attaching method of front sidemember and subframe are placed special importance for impact energy absorption and damageability and repairability. So in order to improve damageability and repairability of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm. The effectiveness of design concept on the 40% offset frontal impact characteristics of the passenger vehicle structure is investigated and summarized.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.157-161
• /
• 2005

In the FY 2003, the number of registered vehicles in Korea reached 14 million, which is 7.7% increase from the previous year. The increase of number of vehicles has caused a lot of social problem with enormous costs. The social costs related to the vehicles includes environmental costs resulting from pollution and scraping of vehicles, those resulting from life-saving and repairing from car accidents and so on. There have been m any efforts to reduce the social costs in m any areas. As a part of the efforts, there are recent grow ing interests on the damageability & repairability in related industries. In this study, we investigated the cases of two different types of bum per stay. Futhermore, we analyzed their effects on damageability & repairability and reduction of repair cost. So we found that if the manufacturers design new cars with good damageability & repairability, then the total repair cost in crash will be reduced.

• 한국해안·해양공학회논문집
• /
• 제25권5호
• /
• pp.276-284
• /
• 2013

비선형 누적피해모형과 경제성 모형을 결합하여 경사제 피복재를 예방적으로 최적 유지관리할 수 있는 추계학적 기대비용모형을 제안하였다. 기존 모형과의 비교를 통해 만족스럽게 검증되었으며, 관련 변수들의 민감도 분석도 자세히 수행하였다. 구조물의 중요도, 피해강도함수 그리고 저항한계에 따른 단위시간당 기대비용이 최소가 되는 최적의 보수 보강 시간을 산정할 수 있었다. 마지막으로 개발된 추계학적 기대비용모형을 경사제 피복재에 적용하였다. 구조물의 유지관리 비용과 편익을 최적화하여 어느 시점에 설계 당시 수준으로 보수 보강이 이루어져야 하는지를 정량적으로 결정할 수 있었다.

• KIEAE Journal
• /
• 제16권4호
• /
• pp.79-86
• /
• 2016

Purpose: Frequently, the apartment management offices have difficulties in effective repair works due to their insufficient technological capability to operate long-term repair program. There also have been many cases of failure in executing urgent repairs mainly because the repair allowance has not accumulated enough for the repair works on time. This study aimed to determine core items in apartment maintenance in order to reduce the confusion and unnecessary efforts for the management office by suggesting simple list of repair items. Method: Core items are defined using several indicators. The degrees of necessity for repair work(NRW) are calculated combining the impacts to living, safety, and aesthetics. Then the degrees of burden of repair cost(BRC) are estimated by analyzing actual long-term repair program of three apartment complexes. Lastly the degrees of accumulation demand for repair allowance(AD) are calculated with NRW and BRC. Result: The core items and essential items are suggested for three apartment types as case studies based on the indicators of NRW, BRC, and AD. Then, the required accumulated allowance per $m^2$ was calculated to effectively implement repair works.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.677-694
• /
• 2009

While the budget has been allocated more for repairs and reinforcements, casualties are gradually increased due to slope disaster. Slope disaster causes road damaged as well as casualties. It also causes significant social and economic loss. The measurement device, which is installed inside ground of slope like inclinometer, has the high loss rate when slope is being slided. The electric type and the vibrating wire type have low durability because of corrosion. To cover the demerit of the present slope monitoring, the measurement method using the Multi-Antenna GPS has been developed. The Multi-Antenna GPS has been installed in the local slope as the regular monitoring system for slope. Although the initial cost of the Multi-Antenna GPS for installation is high, the additional cost is low. So it is the suitable method for large slope. The regular monitoring system using the Multi-Antenna GPS is the suitable measurement method for watching slope collapse, which is occurred widely, because it is economical, has high durability, and collects data with high resolution.

• 적정기술학회지
• /
• 제5권1호
• /
• pp.8-17
• /
• 2019

Solar pumps, for water lift systems, is becoming popular in rural areas for supplying drinking water in dry seasons when its need is elevated. The development in technology has also made solar pumps readily available and cheap which has increased its demands. So, for scattered settlements having a limited budget for operation and maintenance costs, solar pump is preferred over grid connected electrical pumping systems. This primary objective of the study was to design a solar photovoltaic pumping drinking water supply system for a small health post which is about 45 km east from Kathmandu, the capital city of Nepal. The study also compared and verified the final design with the system's existing design prepared by a development agency. The water source for this study was a confined aquifer 115m below the surface. The water demand was calculated to be 11m³ per day. A 1500 kPa submersible pump attached to a motor was selected and installed. Along with that twelve solar panels, reservoir, transmission main and distribution main was designed. The outcomes conclude solar photovoltaic pumping water supply systems to be cost-effective with an estimated cost of only USD 0.84 million per MLD. Solar pumps require low maintenance and operation costs and its repairs can quickly be done by the local people. The study also shows that solar technology produces no sound, needs no fuel making it environmentally friendly.

• 한국주거학회논문집
• /
• 제14권4호
• /
• pp.11-19
• /
• 2003

This study intends to predict prospective defects and establish the plan of Preventive Maintenance through research and analysis of defect occurrences and their repair costs in the public equipment of ‘H’ apartment house from 1998 to 2001. According to results of the analysis, more than 90% of defects and their repair costs for 4 years of the building have occurred in heating, hot water and water supply equipments. In case of specific classification in each equipment, more than 60% of defects were found at hot water pipes and heating pipes, and their repair costs covered more than 60% of the total defect costs. After two repairs by ‘Preventive Maintenance’ had been performed in the year 1998, total defects and defects of each equipment each yew have increased in number from 1999 to 2001. But total repair costs and repair costs of each equipment have not increased as time has gone by, because repair costs have relationship with the price of materials and labor, the part of defect and the scale of repair.

• Computational Structural Engineering : An International Journal
• /
• 제1권1호
• /
• pp.71-80
• /
• 2001

A reliability approach to evaluate structural performance has gained increased acceptability and usage over the past two decades. Most reliability analyses are based on the reliability of an individual component without examining the entire structural system. These analyses often result in either unnecessary repairs or unsafe structures. This study uses examples of series, parallel, and series-parallel models of structural systems to illustrate how the component reliabilities affect the reliability of the entire system. The component-system reliability interaction can be used to develop optimum lifetime inspection and repair strategies for structural systems. These examples demonstrate that such strategies must be based on the reliability of the entire structural system. They also demonstrate that the location of an individual component in the system has a profound effect on the acceptable reliability of that component. Furthermore, when a structure is deteriorating over time, the reliability importance of various components is a1so changing with time. For this reason, the most critical component in the early life of the structure may not tie the most critical later.

• 한국농공학회지
• /
• 제44권7호
• /
• pp.36-45
• /
• 2002

Most of rural bridges have passed 30 years of age since they were built, which have to support unexpected overload caused by changed design load and excessive amount of transportation. For these rural bridges, repairs and replacements are needed. Even though there have been attempt to estimate the safety of existing bridges deteriorated with major defects, those approaches must rely on the observable damage and subsequent decisions are made subjectively. To avoid the high cost of rehabilitation, the bridge rating must correctly represent the present load-carrying capacity. Rating engineers use a methods such as Allowable Stress Design (ASD), Load Factor Design (LFD), and Load Resistance Factor Design (LRFD) to evaluate the bridge load carrying capacity. In this paper, the load rating methods are introduced, and it is illustrated how to use the load test data from literature survey. Load test is conducted to the bridge that was built 30 years ago in rural area. From load test results, new maintenance method is suggested instead of the bridge replacement.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.31-36
• /
• 1996

A Markovian stochastic model for a system subject to random shocks is considered. Each shock arriving according to a Poisson process decreases the state of the system by a random amount. A repairman arrives at the system periodically for inspection and repairs the system only if the state is below a threshold. Costs are assigned to each inspection of the repairman, to each repair, and to the system being in bad states below the threshold. The expected long run average cost is obtained and compared with that of the random inspection introduced by Lee and Lee(1994).