• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1234-1241
• /
• 2008

Cost effectiveness is greatly related with the degree of reducing the testing cost by the technical reviews. In this paper, we present a new metric My for evaluating the cost effectiveness of technical reviews during software development. First, we estimate and compare My with conventional measure using data collected during practical software development procedure, then we show the validity and usefulness of the proposed measure My. Also by formulating the relationship between the data collected during the reviews and the test, we present a method to estimate the value of the metric My using only the data collected during review phase.

• The Journal of Fisheries Business Administration
• /
• v.43 no.2
• /
• pp.41-49
• /
• 2012

This study aimed to estimate the economic value of the recreational fishing in the Jeonnam marine ranching area as a part of the total socioeconomic evaluation of the Jeonnam marine ranching program. A travel cost method was applied to the estimation of economic value of the recreational fishing in the Jeonnam marine ranching area and input variables included annual fishing trip days, average travel cost per trip, average catch amount, monthly income, marriage, age, and personal perception on the marine ranching program. In the analysis, due to its characteristic of count data, both poisson model and negative binomial model were used. Model results indicated that a negative binomial model was statistically more suitable than the poisson model as the overdispersion problem occurred in the poisson model. All signs of the estimated parameters were estimated as previous studies showed. Based on the results, the economic value per trip of the recreational fishing in the Jeonnam marine ranching area was estimated to be 145,000 won and the annual total economic value of the recreational fishing in the Jeonnam marine ranching area was analyzed to be 2,514,000 won. In addition, the change of total value by catch rate showed that the economic value could be increased by 180,900 won as the catch increased by one kilogram.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.313-315
• /
• 2019

A new synthetic method for N-hydroxysuccinimide (NHS), which is widely used in fine chemical and cosmetic industries, was developed. In a conventional synthesis, NHS is obtained by reacting $NH_2OH$ with succinic anhydride in a yield of about 70% using strong acid as a catalyst, which has an advantage of obtaining NHS relatively easily. However, it is expensive because of using a high cost succinic anhydride. In order to overcome this issue, we developed a new synthetic method for NHS with a moderate yield of 80% using a low cost succinic acid instead of succinic anhydride, alongside a stable Lewis acid catalyst, Zn acetate. As a result of the economic evaluation, it was confirmed that the cost reduction effect was about 15%.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.4
• /
• pp.109-118
• /
• 2012

The large-space single-layer lattice dome is relatively simpler in terms of the arrangement of the various framework members and of the design of the junction than the multi-layered lattice dome, can reduce the numbers and quantity of the framework members, and has the merit of exposing the beauty of the framework as it stands. The single-layer lattice dome, however, requires a stability investigation of the whole structure itself, along with an analysis of the stress of the framework members, because an unstable phenomenon called "buckling" occurs when its weight reaches critical levels. Many researchers have systematically conducted researches on the stability evaluation of the single-layer lattice dome. No construction case of a single-layer lattice dome with a 300-m-long span, however, has yet been reported anywhere in the world. The large-space dome structure is difficult to erect due to the gigantic span and higher ceiling compared with other common buildings, and its construction cost is generally huge. The method of erecting a structure causes major differences in the construction cost and period. Therefore, many researchers have been conducting various researches on the method of erecting such structure. The step-up method developed by these authors can reduce the construction cost and period to a great extent compared with the other general methods, but the application of this method inevitably requires the development of system supports in the center section as well as pre-existing supports in the boundary sections. In this research, the safety during the construction of a single-layer lattice dome with 300-m-long span using pre-existing materials was examined in the aspect of structural strength, and the basic data required for manufacturing the supports in the application of the step-up method developed by these authors during the erection of the roof structure were obtained.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1145-1152
• /
• 2016

A construction post evaluation is introduced to provide information that can be used for similar construction projects in the future through the evaluation of the efficiency of a public construction project and the verification of the appropriateness of the project results. However, it is not widely used due to a lack of awareness of the method. For this reason, the aim of this study is to provide a basic frame that can be utilized as a reference for a similar project in the future based on the construction post evaluation. More specifically, a more effective analysis method for the construction post evaluation is proposed and then an exemplary analysis is performed based on the method. The paper analyzes 293 cases stored in construction CALS. Construction cost growth rates of railway projects are tend to be greater than other project types like highway, expressway, and harbour. Then, construction schedule grwoth rates of expressway are greater than others. This is expected to provide useful information for a future project, and serve as a basic frame. Moreover, it is also meaningful that a project can be analyzed from different perspectives through the construction post evaluation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.195.2-195.2
• /
• 2011

The borehole heat exchanger of Geothermal Heat Pump (GHP) system should be sustainable and cost effective for long term operation. To guaranty the performance of the system thermal Response Tests (TRTs) with simple recommended procedures have been applied in many countries. Korea government developed a standard TRT procedure in order to control the quality on GHP projects. In the TRT procedure interpretation method has a rule that data set has to be interpreted by the line source model(LSM). The LSM employes some assumptions that surrounding medium is homogeneous and the line source is infinite and constant heat flux, however real ground condition is unisotropic and heterogeneous, and showing regional or local ground water flows in many cases. We need to develope improved evaluation models to estimate accurate ground thermal conductivity with respect to geological and influence of ground water because current TRT standard test procedure has limitations to be applied for every locations and system. This study surveyed the uncertainty of the thermal parameters from the interpretation method considering different evaluation period. The interpretation of 208 TRT data sets represents limitations of LSM application that some obtained ground thermal conductivities are statistically unstable and convergence time of ground thermal conductivity over test period shows trends responding the length of test period. This evaluation study will be helpful to provide some effective procedure for the thermal parameter estimation and to complement current TRT standard procedure.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.1
• /
• pp.153-160
• /
• 2001

Various computer-based learning programs have been developed in recent year. However, their quality has not been improved significantly. One major reason for little improvement on the quality is that most programs did not use an evaluation method to improve the quality of a programs. This paper is to introduce various evaluation methods such as evaluating a program by one expert, by a team of several experts, by a learner, by a small group of learners, by several learners and experts, by a focus group, and etc... These methods could improve the quality as well as increase the effectiveness of a programs. The effectiveness of each program will be increased by applying an appropriate evaluation method according to various factors such as time, cost. or learners.

• Journal of the Korean Institute of Navigation
• /
• v.8 no.1
• /
• pp.17-48
• /
• 1984

The economy of ship's size and speed is affected by the freight rates, sailing distances, cargo handling rates, fuel oil prices and even interest rates of the borrowed funds. It can be a step more powerful measures if the economic evaluation model takes in a cargo lot size which prevails in the shipping markets. This paper has dealt with hypothetical cargo lots which happen to the market with uniform distribution in probability. The evaluation models are either profit maximization method or cost minimization method. The former compares among different voyages in profitability to the invested funds, the later defines the transportation efficiency in ton-mile unit and be used in comparing two or more transportation means. This paper adopted both of above methods to derive out ships economical evaluation contours for the various ship's speed and deadweight for certain cargo lot sizes, which can be used as important managerial decision data in purchasing ships or selecting a most profitable one among the proposed voyages. This evaluation contours will also be efficiently used in appraising so called "handy size ships" in connection with port water depth and conditions of voyage tracks.ge tracks.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.2
• /
• pp.136-145
• /
• 2007

This study analyzes the current usage of SD500 high-strength re-bar in domestic construction sites. Also, an evaluation method was developed to measure economic efficiency of lap splice and coupler splice, which are most commonly used in connection SD500. The evaluation method was applied to construction sites in Seoul in December 2006, and the result revealed that coupler splice is relatively superior in terms of cost efficiency when the re-bar diameter is bigger and the concrete strength is lower.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.