• 자원ㆍ환경경제연구
• /
• 제1권1호
• /
• pp.1-25
• /
• 1991

The domestic liquefied natural gas project has been carried out as a national energy scheme since the late 1980's in Korea. The natural-gas supply for civilian demand is limited to the Kyung-In area. In addition, seven major city gas corporations which now participate in the project occupy the monopolistic service area. In this study, objective cost evaluation criteria for gas distribution and an improved proposal in the evaluation method are suggested. They will go forward in solving the problems to promote demand and prevent excess profit or deficit according to the physical characteristics of the monopolistic service area.

• 한국건설관리학회논문집
• /
• 제23권5호
• /
• pp.65-76
• /
• 2022

국내 건설기술의 발전을 도모하고 국가경쟁력을 제고하기 위한 목적으로 1989년 도입된 건설 신기술 지정제도는 심사과정에서 신기술의 원가계산서를 검토하고, 설계·시공 공사비, 유지관리비 등 비용절감효과와 공사기간 단축 효과를 경제성 항목으로 평가하고 있다. 그러나 이 과정에서 고유기술에 대하여 공사비산정기준관리기관과 신기술 개발자간의 의견차이가 빈번히 발생하고 있으며, 또한 현행 신기술에 대한 원가산정기준이 단위수량당 소요량만을 제시하는 방식으로 생산성에 대한 정보가 부재하여 기존 유사 기술과의 공사기간에 대한 객관적인 비교가 어려운 실정이다. 본 연구에서는 건설 신기술 심사 시 원가산정기준 검토절차와 심사기준, 신기술 품셈 작성방법 등 현황을 분석하고 해외 원가산정기준과 비교하여 현행 건설 신기술의 원가산정기준 개선방안을 제시하였다. 제시한 개선방안은 작업조 기반의 생산성 정보를 제공하고, 적용단가를 제시하여 원가기준의 투명성을 확보할 수 있도록 구성하였으며, 신기술의 특성을 고려하여 재료비와 기계경비에 대한 원가정보 역시 제공할 수 있도록 하였다. 본 연구의 개선된 원가산정 기준을 통해 발주자에게 신기술에 대한 원가정보를 현행보다 세부적으로 제공하고, 공사비 산정 과정을 보다 간소화함으로써 건설 신기술의 활용과 현장적용성을 향상시킬 수 있으리라 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권2호
• /
• pp.51-66
• /
• 1984

The cost percentage of engine part in the total building cost of a ship is about 30-40% and the main engine occupies about 50% of the engine part cost. For certain ships the fuel bill can be as high as about 60-70% of the total operating cost after two oil shocks and its amount for one year is nearly equivalent to her main engine price. This fact has further increased the pressure on the engine builders to develop engines of higher efficiency and better possibilities to burn further deteriorated fuel qualities. But the energy-saving plants are ordinarily more expensive and their available amount of exhaust gas energy is less and therefore, they are not always profitable and optimum systems. This paper is prepared to decide the most economical and efficient engine systems by presenting reasonable selecting and economical evaluation methods of the main engine, which is the largest single unit and the most expensive, and its auxiliaries. In order to demonstrate the application of investigated methods in a practical case, a 46, 000 DWT class bulk carrier is selected as a model ship and her main engine and its auxiliaries are selected and evaluated. The result shows that the optimum determined has one year three months POP, 0.903 IRR at a year, 4, 116, 000 dollars PW in 15 years (for 5% escalation rate of fuel cost) and 9.522 BCR for same condition, when the engine plant of a same existing ship is taken as the basis.

• 한국건설관리학회논문집
• /
• 제9권6호
• /
• pp.216-224
• /
• 2008

최근 들어 선진국에서는 LCC에 대한 평가 제도를 활발히 활용 중에 있고, 우리나라는 생애주기비용을 절감하기 위하여 그 제도를 신규로 도입하고 있다. 그리고 새로운 정부공사 발주방식인 “기술제안형 입찰방식” 도입에 따라 시설물의 LCC 평가가 필요하게 되었다. 현재 우리나라는 BTL과 턴키 프로젝트에서 LCC를 평가하고 있으나 평가요소와 기준이 불명확하여 평가에 어려움을 겪고 있고, BTL과 턴키를 제외한 공공건설사업은 LCC 평가가 이루어지지 않고 있는 실정이다. 따라서 본 연구에서는 LCC를 체계적이고 객관적인 평가를 위한 평가기준 및 활용방안을 제시하고자 한다. LCC 평가기준을 도출을 위한 연구방법 및 주요결과는 다음과 같다. (1) 기존의 평가기준을 분석하여 평가기준의 필요성 및 문제점을 파악하고, (2) 보고서분석 및 설문조사를 통하여 LCC 평가기준을 도출하였고, (3) 실무에서 합리적으로 활용할 수 있도록 활용방안 및 평가방법을 제시하였다.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.172-177
• /
• 2006

본 연구에서는 배전계통의 부하지점의 부하형태에 따른 정전비용의 영향을 고려하여 분산전원을 설치함으로써 운영비용 및 정전비용을 최소화하는 방안을 제안하였다. 가정용, 산업용, 상업용, 사무용 및 농업용 등 부하형태를 실제 계통과 유사하게 고려함으로써 정확한 신뢰도 지수와 운영비용을 구할 수 있고, 이를 통해 총 운영비용 최소화에 더욱 접근할 수 있다. 특히 정전시 각 부하지점에 설치된 분산전원에 의해 전력이 공급되어 전력구입 비용과 정전비용의 경우 효과적으로 감소됨을 알 수 있었으며, 정전빈도와 정전시간이 감소되어 전력 공급률이 향상되어 신뢰도 지수가 좋아졌음을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.195_196
• /
• 2009

As the electrical power industry is restructured, the electrical power exchange is becoming extended. One of the key information used to determine how much power can be transferred through the network is known as available transfer capability (ATC). To calculate ATC, traditional deterministic approach is based on the severest case, but the approach has the complexity of procedure. Therefore, novel approach for ATC calculation is proposed using cost-optimization method in this paper, and is compared with well-being method and risk-benefit method. This paper proposes the optimal transfer capability of HVDC system between mainland and a separated island in Korea through these three methods. These methods will consider production cost, wheeling charge through HVDC system and outage cost with one depth (N-1 contingency).

• 한국전자거래학회지
• /
• 제15권1호
• /
• pp.119-137
• /
• 2010

RFID 확산이 어려운 이유 중 하나는 구체적 경제성 분석 방법의 부재라 할 수 있다. 기존 문헌 분석과 파급 효과가 큰 택배산업 사례를 통해 RFID 도입에 따른 비용/혜택 분석을 포함한 경제성 분석 방법을 제시하였다. RFID 적용 효과의 기대 수준을 낙관적, 보수적, 비관적으로 정의하여 분석하고, 태그 단가 등에 따른 민감도 분석을 통해 RFID 비용과 RFID 기술 기대 수준에 따른 불확실성을 반영하였다. 본 연구의 결과는 RFID 도입을 위한 의사결정에 기여할 수 있을 것으로 예상된다.

• 한국건축시공학회지
• /
• 제2권4호
• /
• pp.123-129
• /
• 2002

This research is aiming to specify the requirement of the investment such as initial cost, running cost earning rate to make effective investment considering the purpose of remodeling and economical value of store building enough to meet the initial purpose of remodeling. The review of earning rate for economical evaluation was performed by the on-site auditing on the structure and function of the building and applying the assessment simulation program, which is to find the possible business model to identify the requirement of building owner through case study. After the research, the following results are obtained. First, it is important that many aspects should be carefully analysis and the best method should be selected as characteristics of remodeling can tie defer each other in their implementations. Second, though the remodeling of exist buildings to promote the functions has been applied. no suitable assessment tool has bee developed for deriding the level of remodeling in the view of economical efficiency so far. Third, the economical benefit was evaluated by analysing annual earning rate which is applied by investment items and recovery period for the investment. More specific data base should be established to apply the suggested economic accession in business enough to forecast the future circumstances. More researches should be promoted on this area continuously as well as the integrated economic evaluation of remodeling on existing building.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.55-59
• /
• 2004

In this study, the required life cycle cost is evaluated in consideration of the equipment's availability during its lift cycle. In order to meet the maximum availability required by the process, the failure cost and life cycle cost is assessed The optimal equipment selection method is presented according to the analysis of the failure cost and life cycle cost. For the systems in which equipments are connected serially, the optimal equipments are selected by minimizing the life cycle cost and satisfying the required system availability goal. In addition, the selection methods and lift cycle cost are analyzed according to the cost variation of the equipment. By using the life cycle evaluation procedure, the failure cost and maintenance cost needed during the life cycle of the equipment can be presented.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.37-41
• /
• 2011

This paper introduces the special eddy current sensor and its characteristic for bolt hole defect evaluation in gas turbine rotor. In the past, Fluorescent penetration inspection method was used for qualitative defect evaluation in gas turbine rotor bolt hole. This method can defect the bolt hole defect but can not evaluate the defect size. Nowadays, eddy current method is used quantitative defect evaluation due to advanced sensor design technology. And eddy current method is more time and cost saving than the old method. We developed bolt shape eddy current sensor for the rotor bolt hole defect detection and evaluation. The eddy current sensor moves to the bolt hole guided by screw nut and detects the defect on the bolt hole. The bolt hole mock-up and artificial defects were made and used for the signal detection & resolution analysis of eddy current sensor. The results show that signal detection capability is enough to detect 0.2 mm depth defect. And the resolution capability is enough to differentiate 02, 0.5, 1.0 and 2.0 mm depth defect.