• Journal of Preventive Medicine and Public Health
• /
• v.50 no.2
• /
• pp.91-99
• /
• 2017

Objectives: As in many low-income and middle-income countries, out-of-pocket (OOP) payments by patients or their families are a key healthcare financing mechanism in Bangladesh that leads to economic burdens for households. The objective of this study was to identify whether and to what extent socioeconomic, demographic, and behavioral factors of the population had an impact on OOP expenditures in Bangladesh. Methods: A total of 12 400 patients who had paid to receive any type of healthcare services within the previous 30 days were analyzed from the Bangladesh Household Income and Expenditure Survey data, 2010. We employed regression analysis for identify factors influencing OOP health expenditures using the ordinary least square method. Results: The mean total OOP healthcare expenditures was US dollar (USD) 27.66; while, the cost of medicines (USD 16.98) was the highest cost driver (61% of total OOP healthcare expenditure). In addition, this study identified age, sex, marital status, place of residence, and family wealth as significant factors associated with higher OOP healthcare expenditures. In contrary, unemployment and not receiving financial social benefits were inversely associated with OOP expenditures. Conclusions: The findings of this study can help decision-makers by clarifying the determinants of OOP, discussing the mechanisms driving these determinants, and there by underscoring the need to develop policy options for building stronger financial protection mechanisms. The government should consider devoting more resources to providing free or subsidized care. In parallel with government action, the development of other prudential and sustainable risk-pooling mechanisms may help attract enthusiastic subscribers to community-based health insurance schemes.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2017

For the efficient and stable operation of autonomous vehicles or advanced driver assistance systems being actively studied nowadays, it is important to determine the positions of the vehicle accurately and economically. A satellite based navigation system is mainly used for positioning, but it has a limitation in signal blockage areas. To overcome this limitation, sensor fusion methods including additional sensors such as an inertial navigation system have been mainly proposed but the high sensor cost has been a problem. In this work, we develop a vehicle position estimation algorithm using in-vehicle sensors and a low-cost imaging sensor without any expensive additional sensor. We determine the vehicle positions using the velocity and yaw-rate of a car from the in-vehicle sensors and the position and attitude of the camera based on the single photo resection process. For the evaluation, we built a prototype system, acquired test data using the system, and estimated the trajectory. The proposed algorithm shows the accuracy of about 40% higher than an in-vehicle sensor only method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1567-1572
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1321-1326
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2753-2758
• /
• 2014

Around-View, the image processing device which increases the comfort of drivers is sold in the market. This system prevents accidents in advance while driving or parking. The accidents are caused with their inexperienced driving or bad visibility. It is developed for driving convenience. However, it dosen't spread to the driver widely due to the problem of the high installation costs and complex installation process. First, expensive equipment second, difficult development environment and third, inconvenient installation procedure. So the drivers don't have many opportunities to use this system and dare to develop this system. I think if one of the problems can be solved, users might be able to access this system at low cost. In this paper, the AVM(Around-View Monitoring) minimizes two of them. Expensive equipment, inconvenient installation. The costly problems were solved by using low-cost USB device and rear cameras. In view of inconvenient installation process, the new system was designed to make it easy for people to install it. Through this, it can ease the burden of consumers.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.761-782
• /
• 2006

Public concern about potential environmental risks of agricultural business for the livestock production and processing is increasing. However, due to differences in general industry structural characteristics, such as farm production and waste management practices, the effect of environmental policies may differ from species to species as well as across size categories. I hypothesize that additionally the Hog subsector may be more responsive to (or a greater driver of) a changing environmental policy environment than the beef cattle subsector. As a result, I expect to see more evidence of sensitivity in the environmental policy milieu from hog-operation stocking and location decisions than with the beef cattle industry. The written stringency may not effective, instead state's willingness to enforce has directed and regulated. However, in presence of rapid structural change, just like hog, industry location is affected by state regulation. The environmental compliance cost may be a small portion of industry total cost and fixed cost of beef industry makes for them to take into account environmental compliance for their decision location making. The special movements of flog industry have chance to minimize the cost of the operation and they willing to locate less stringent place.

• Tribology and Lubricants
• /
• v.28 no.2
• /
• pp.93-98
• /
• 2012

The engine oil is an oil used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in Korea. In this case, it is possible to cause environmental contamination by used engine oil and increase the cost of driving by frequently oil change. In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and four-ball test for fresh engine oil and used engine oil after vehicle driving (5000 km, 10000 km). The test result showed that the total acid number and wear scar by four-ball test of used engine oil had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000 km) had similar physical properties.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1480-1484
• /
• 2004

In this paper, a self-propulsive and small concrete floor finishing trowel robot with twin trowels is proposed. Due to the small size and omni-directional moving capability, it is adequate for small space such as apartment. By adjusting the posture of trowels, it can move in any direction without wheels. We used cheap PIC processor for the cost saving design of the modules and adopted mode processors for easy operation of control stick. For the position control of the robot, we made a motion control algorithm appealing to the stepping motor driver module and the wireless communication module between the robot and PC (or control stick). In this paper, we discuss the control problem of the floor finishing robot in order to move to the right position. By comparing experimental result with simulation, we show the validity of the robot mechanism, sensors, and the control system.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.145-168
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Research is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments' industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime Minister in January 2001, commits an additional $3 billion overfive years to encourage and support innovation. The Australian Government aims to build world competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity. It develops policies and programs to enhance investment in innovation. The Australian Government has established a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around $400-million a year. This cost is expected to rise to over half a billion by 2005-06 (Commonwealth of Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.302-305
• /
• 2016

In this paper, a low on-resistance and high current driving capability trench gate power metal-oxide-semiconductor field-effect transistor (MOSFET) incorporating a current sensing feature is proposed and evaluated. In order to realize higher cell density, higher current driving capability, cost-effective production, and higher reliability, self-aligned trench etching and hydrogen annealing techniques are developed. While maintaining low threshold voltage and simultaneously improving gate oxide integrity, the double-layer gate oxide technology was adapted. The trench gate power MOSFET was designed with a 0.6 μm trench width and 3.0 μm cell pitch. The evaluated on-resistance and breakdown voltage of the device were less than 24 mΩ and 105 V, respectively. The measured sensing ratio was approximately 70:1. Sensing ratio variations depending on the gate applied voltage of 4 V ~ 10 V were less than 5.6%.