• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1069-1074
• /
• 2022

IP mobility can be handled in different layers of the protocol. Mobile IP has been proposed to handle the mobility of Internet hosts in the network layer. Recently, a new method based on the SIGMA mobility architecture has been proposed to support mobility management with reduced packet loss and latency. The location management structure is not suitable for frequent mobile handover due to the high mobility of the user with this transport layer solution. In this paper, we propose a location management optimization method in a mobile communication network by applying hierarchical location management using MMPs(Mobility Management Points) for transport layer mobility management. Therefore, we propose an efficient hierarchical mobility management structure even between heterogeneous wireless networks using MMPs for the probability that a mobile terminal can change multiple location areas between two messages and calls. The proposed method shows reduction in location update cost and data retrieval cost using MMPs, and as opposed to mobility appearing in time intervals with the minimum cost required to reach 90% of the stabilized cost, the mobility location update search, location It was found that the message processing cost per area was reduced.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.219-236
• /
• 2008

A research on logistics cost needs a great deal of effort to calculate logistics cost and analyze its characteristics due to the complexity of logistics cost components. For this reason, the logistics cost is generally calculated based on the government level analysis. However, the standards for calculating logistics cost have not been obvious so far. Furthermore, it is true that it takes a long time and a lot of money to evaluate the percentage of each logistics cost component. The expansion of SCM entities has diversified the factors determining the logistics cost and the change of business environment has had an effect on the components of logistics costs. Therefore, in order to research on logistics cost, it is needed to focused on not only the segmentation of logistics cost components but also on their characteristics, and to separate the former from the latter. That is because the logistics cost components or the characteristics of these components depend on the current situation and conditions of companies. In addition, a strategy to reduce the components of logistics costs such as the transport cost and the storage cost without analyzing the characteristics and causes of the logistics cost could be an alternative unsuitable for the current status of companies concerned. In conclusion, this study was aimed at investigating the factors which are required to fundamentally assume and consider in an effort to calculate and reduce logistics cost based on analyzing the characteristics of logistics cost components.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.17-28
• /
• 2001

The purpose of this study is to analyze logistics cost of transportation systems on EC(electronic commerce) between company and consumer. Transportation system in logistics is classified by three types on EC. The first type is the direct delivery from supply factory to consumers(type I). The second type is the delivery through distribution center in each area by owner logistics company (type II). The third type is the commission of delivery to the third party logistics company(type III). The logistics of EC has various service characteristics such as dealing with small quantity, various goods, and high frequency. This study assumes that all day's order is delivered on a next day. The logistics cost function is calculated according to the number of orders, delivery distance, transport quantify. and allocated freight trucks for daily order of the subject zone. The logistics cost changes according to the daily order characteristics. Therefore it is simulated to analyze the logistics cost change that considers the type of transportation's order characteristics. As a result of analysis, if the number of order is less than 10 and the quantify of each order is less than 10kg, type III has an advantage over the others And if the number of order is more than 10 and the quantity of each order is more than 10kg, type I has an advantage in the same zone and type II has an advantage in the other zones. This study is limited on the actual application because this study doesn't consider logistics infra of supply company and transport service time. If further study that considers these factors is implemented, it can estimate more accurate logistics cost on EC and propose an efficient freight transport alternatives to the company. This study attributes to estimate the logistics cost change over the frequency of daily order, the quantify of supply goods, and the transport distance on EC.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1335-1336
• /
• 2007

Among the emerging non-volatile memory technologies, phase change memories are the most attractive in terms of both performance and scalability perspectives. Phase-change random access memory(PRAM), compare with flash memory technologies, has advantages of high density, low cost, low consumption energy and fast response speed. However, PRAM device has disadvantages of set operation speed and reset operation power consumption. In this paper, we investigated scalability of $Ge_{1}Se_{1}Te_{2}$ chalcogenide material to improve its properties. As a result, reduction of phase change region have improved electrical properties of PRAM device.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.113-126
• /
• 1992

Recently the multi-kind, small-amount manufacturing system has been replacing the mass manufacturing system, and domestic machining inustry also is eager to absorb the new technology because of its high productivity and cost reduction. The optimization of the cutting condition has been a vital problem in the machining industry, which would help increase the productivity and raise the international competitiveness. It is intended in this study to investigate the machining costs per unit time which is essential to the analysis of the optimal cutting condition, to computer the cutting speed that lead to the minimum machining costs and the maximum production to suggest the cutting speed range that enables efficient speed cutting, and to review the machining economy in relation to cutting depth and feed. Also considered are the optimal cutting speed and prodution rated in rrelation with feed. It is found that the minimum-cost cutting speed increases and the efficient cutting speed range is reduced as machining cost per unit time increases since the cutting speed for maximum production remains almost constant. The machining cost is also lowered and the production rate increases as the feed increases, and the feed should be selected to satisfy the required surface roughness. The machining cost and production rate are hardly affected by the cutting depth if the cutting speed stays below 100m/min, however, they are subject to change at larger cutting depth and the high-efficient speed range also is restricted. It can be established an adaptive optimal cutting conditions can be established in workshop by the auto-selection progam for optimal operation. It is expected that this method for choosing the optimal cutting conditions might contribute to the improvement of the productivity and reduced the cost. It is highly recommended to prepare the optimal cutting conditionthus obtained for future use in the programing of G-function of CNC machines. If proper programs that automatically select the optimal cutting conditions should be developed, it would be helpful to the works being done in the machine shops and would result in noticeable production raise and cost reduction.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7701-7706
• /
• 2013

Background: In a prospective cohort study of antiemetic therapy conducted in Malaysia, a total of 94 patients received low emetogenic chemotherapy (LEC) with or without granisetron injections as the primary prophylaxis for chemotherapy-induced nausea and vomiting (CINV). This study is a retrospective cost analysis of two antiemetic regimens from the payer perspective. Materials and Methods: This cost evaluation refers to 2011, the year in which the observation was conducted. Direct costs incurred by hospitals including the drug acquisition, materials and time spent for clinical activities from prescribing to dispensing of home medications were evaluated (MYR 1=$0.32 USD). As reported to be significantly different between two regimens (96.1% vs 81.0%; p=0.017), the complete response rate of acute emesis which was defined as a patient successfully treated without any emesis episode within 24 hours after LEC was used as the main indicator for effectiveness. Results: Antiemetic drug acquisition cost per patient was 40.7 times higher for the granisetron-based regimen than for the standard regimen (MYR 64.3 vs 1.58). When both the costs for materials and clinical activities were included, the total cost per patient was 8.68 times higher for the granisetron-based regimen (MYR 73.5 vs 8.47). Considering the complete response rates, the mean cost per successfully treated patient in granisetron group was 7.31 times higher (MYR 76.5 vs 10.5). The incremental cost-effectiveness ratio (ICER) with granisetron-based regimen, relative to the standard regimen, was MYR 430.7. It was found to be most sensitive to the change of antiemetic effects of granisetron-based regimen. Conclusions: While providing a better efficacy in acute emesis control, the low incidence of acute emesis and high ICER makes use of granisetron as primary prophylaxis in LEC controversial.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.3
• /
• pp.110-114
• /
• 2016

Newly constructed multi-residential buildings with more than 500 households should be flushed out indoor contaminants using a mechanical ventilation system or large fans after the completion of construction and prior to occupancy by the Heath-friendly Housing Construction Standards since 2014. In addition, the standard recommends to maintain indoor temperature over $16^{\circ}C$ and relative humidity below 60% while performing the flush-out. However, it is difficult to maintain these recommended indoor conditions, especially during winter season because additional energy cost is needed for space heating. Therefore, in this study, additional energy cost including heating and ventilation energy cost in multi-residential household for flush-out during winter season was estimated using building energy simulation program called EnergyPlus. Additional energy cost according to various conditions for performing flush-out (such as performance period, ventilation rate, and heating set-point temperature) was analyzed. Based on the results of the energy simulation, the energy cost was estimated to be ranged from 14,625 to 29,452\/household in Incheon city and from 3,521 to 26,268\/household in Gwangju City. There was no significant change in energy cost according to the performing terms of flush-out between Incheon and Gwangju City.

• Environmental and Resource Economics Review
• /
• v.30 no.1
• /
• pp.107-128
• /
• 2021

It has been recognized that implementing the marginal price mechanism to CBP is not acceptable due to the lack of revenue of the marginal generators. This study shows that it is not the problem of marginal price mechanism but the structural problems originated by the suspension of restructuring, the technical limits of RSC program and inaccuracy of the generation cost estimation method. This study explains the method to calculate the cost function in operating modes of the CC generators and proposes the modeling for the CC generators in RSC program. To implementing the cost function in operating modes could give an opportunity to change the price setting mechanism from average to marginal cost. The price setting mechanism based on the marginal cost will be one of the main points to provide the right price signals and to introduce a real-time and A/S markets to prepare the energy transition era.

• The Korean Journal of Financial Management
• /
• v.23 no.2
• /
• pp.57-83
• /
• 2006

The purpose of this paper is to analyze the efficiency and productivity change and inefficiency cause of the korean non-life insurance companies of the before($1993{\sim}1996$) and after($1998{\sim}2004$) of IMF. we use DEA (Data Envelopment Analysis) model to measure company efficiency and MPI(Malmquist productivity indices) to measure company productivity change and Tobit regression to analyze inefficiency cause. we utilize ten non-life insurance companies in korea and the time-series data for eleven from 1993 to 2004 except 1997. The empirical results show the following findings. First, total cost efficiency shows that the after of IMF decrease of 3.7% over the before of IMF and MPI change indicates that the after of IMF increase 7.7% over the before IMF. Second, the results of Tobit regression to analysis the cause of inefficiency show that total cost efficiency is positively related invested assets, acquisition expenses ratio, collection expenses ratio and is negatively related solicitors ratio, personnel expenses ratio, land & buildings expenses ratio, loss ratio, net operating expenses ratio. Especially inefficiency of small-to-mid sized companies is main cause of total cost efficiency of non-life insurance companies in korea. Small-to-mid sized companies endeavored various aspects of business strategies.