• 한국강구조학회 논문집
• /
• 제18권1호
• /
• pp.81-91
• /
• 2006

파형 강판은 파형 형상으로 가공한 강판으로 교량, 건축물, 암거 등의 구조물에 많이 사용된다. 파형강판을 이용한 거더의 구조물 적용시 국부적인 면내 압축하중에 의해 크리플링현상이 발생할 수 있는데 높은 면외방향의 강성을 갖는 파형강판의 특성 때문에 보강재를 사용하지 않는 경우가 많이 있고 파형형상에 따라 지압하중의 경계조건이 달라진다. 몇 연구자들이 제형파형강판의 지압강도에 대한 연구를 하였으나 파형형상이 지압강도에 미치는 영향이 크게 고려되지 않았다. 따라서 본 연구에서는 이에 따른 영향을 유한 요소해석법을 통하여 여러 가지 파형형상에 대한 변수해석을 하고 지압강도를 복부판 내하력과 플랜지 내하력으로 나누어 파형 형상과 지압강도와의 상관관계를 파악하였다.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.74-80
• /
• 2009

The membrane of the LNG carriers consists of thin strips of INVAR(Fe-36%Ni) steel plates, and the junction between INVAR strips is fabricated by welding. Thousands of the raised edge joints, regularly spaced, are located around all the side of the tank corner near the transverse bulkhead, and TIG welding is manually made on the top of the raised edges. Since the thickness of all the laminated edge plies is extremely thin and the weld position is under a bad accessibility, highly skilled workers are required to perform welding relatively for a long welding time. An alternative scheme for the corner membrane fabrication is proposed in the study to improve the installation workability and thus productivity. The scheme replaces the welded edges with the preformed corrugation ones. A panel strip with regularly-spaced corrugations is installed at the corner instead of the individual flat strip of which edge is vertically raised to be welded with the adjacent strip. In the study, a series of the evaluation on the corrugated edge members was performed to assess the applicability to the real LNG carrier fabrication. Opening displacement at the raised edge was experimentally examined. Elastic stiffness regressed from the displacement was nearly same in both edge types. Edge displacement and local stresses were calculated under hydrostatic pressure and temperature change due to liquefied cargo. Fatigue test was performed on both corrugated and welded edge specimens consisting of two or five plies of invar strips. Fatigue strength of the corrugated specimens was not less than that of the welded specimens.

• 한국강구조학회 논문집
• /
• 제16권3호통권70호
• /
• pp.365-375
• /
• 2004

이 연구에서는 FEM 해석을 통하여 파형강판 이음부의 강도 및 응력분포 특성에 관한 축방향 겹침길이 및 볼트간격의 영향 등을 검토하였다. 파형강판의 항복강도비($P/P_y$) 및 항복 후의 강도상승률은 축방향 겹침길이가 30mm일 때 가장 유리하게 되며, 현행의 제작기준에 의한 겹침길이는 매우 안전측의 값이 된다. 또한 파형강판 이음부의 강도특성은 볼트배치 방법에 따라 차이가 있는 것으로 나타났다. 즉, 볼트가 지그재그로 배치되어있는 표준형의 경우에는 주로 원둘레방향의 연단거리만이 강도에 영향을 미치게 되며, 볼트가 일렬로 배치되어있는 대골형의 경우에는 원둘레방향 연단거리와 볼트중심간격 모두 강도특성에 영향을 미치게 된다. 이 연구에서는 이상의 해석결과로부터 구한 강도특성 및 응력분포특성을 기초로 하여 현행의 파형강판 이음부 제작기준에 대한 타당성을 검토하였다.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1233-1238
• /
• 2003

본 논문에서는 마이크로스트립 패치 안테나의 소형화를 위해 방사 주름 원형 마이크로스트립 패치 안테나를 GPS 목적에 맞게 1.575 GHz를 중심으로 설계ㆍ제작하였다. 방사 주름 원형 패치 안테나는 평면형 패치를 3차원 방사 요철형 패치 구조로 제작함으로써, 패치 밑면에 흐르는 전류에 직각의 요철 경로를 갖게 하여 가시적인 공진 길이를 증가시켰으며, 그 결과 선형 편파인 경우 평면 원형 패치 안테나에 비하여 28 % 면적 단축율을 얻었으며, 원형 편파의 경우 27.7 %면적 단축율을 나타내었다. 이때 이득 2.1 dBd, 축비 1.3 dB, 2 dB 축비 대역폭 15 MHz(0.9 %)를 나타내어 소형화된 GPS용 수신안테나로써 적합한 특성을 나타내었다.

• 한국포장학회지
• /
• 제7권1호
• /
• pp.9-15
• /
• 2001

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was carried out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiberboards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

• 한국포장학회지
• /
• 제5권2호
• /
• pp.17-23
• /
• 1999

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was rallied out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiber-boards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.37-42
• /
• 2008

Defects of corrugated board were limiting factors to the corrugated industry's growth. On-line detecting systems of defects are beneficial to increase profits of the corrugated board companies by reducing base paper consumption, increasing process reliability, and increasing productivity. By replacing naked eye inspection of defects to a defects detecting system, continuous inspection without fatigue may guarantee final products quality. The system was developed, which was consisted of line scan CCD camera, lens, illuminating parts, high speed image processor, software, various input parts, and output parts. First installation location of the system was at before fluting process after base paper unwinding, and surface of liner board was inspected by the system. Second installation location was after fluting process and combining process for liner board. Production loss includes ragged appearance of edge, irregular flute shape, wrong combination of flute, score cracking, defects in base paper, and flute cracking. The production loss was analyzed before and after the system installation at a commercial domestic mill. The production loss ratio was defined as a production loss weight per total production weight. The production loss ratio before the installation was decreased a lot from 1.28%(during 3 months before installation) to 0.76%(during 12 months after the first installation) and to 0.25%(during 6 months after the second installation).

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권2호
• /
• pp.1-12
• /
• 2017

본 연구에서는 대골형 파형강판 합성부재의 구성요소를 고강도 재료로 대체하고 이음방법, 전단보강방법 등 단면구성방법에 따른 단위부재의 휨거동을 분석하여 대골형 파형강판 합성부재 구조물의 장대화 및 적용범위확대를 위한 기초자료를 제시하고자 하였다. GR40과 SS590 강재를 적용한 합성구조체의 휨실험 결과, SS590 파형강판을 적용한 경우 정모멘트 하중저항성능은 약 28%가 증가되는 것으로 확인되었으나 부모멘트 저항성능은 미미한 것으로 확인되었다. 볼트의 개수를 증가시킨 파형강판 이음방법의 정모멘트 및 부모멘트 저항성능증가율은 높지 않은 것으로 확인되었다. 이는 고강도 재료에 따른 볼트의 접합 특성(볼트중심에서 연단까지의 거리, 볼트중심간 간격 등)이 거동에 영향을 미쳤기 때문인 것으로 추정된다. 전단보강재 간격별 휨실험 결과, 보강재 간격이 감소할수록 정모멘트에 대한 하중저항성능, 부모멘트에 대한 변위저항성능이 향상되는 것으로 확인되었다. 전단보강재 형상별 휨실험결과, U형 보강재 적용에 따른 정 부모멘트 저항성능 증가율은 약 2%~7% 로 낮았다. 따라서 대골형 파형강판 합성부재의 휨성능증가에는 파형강판의 강종, 전단보강재 간격, 보강철근의 특성이 주요한 영향을 미치는 것으로 판단된다.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.212-226
• /
• 2006

This paper is a continuation of the authors' previous work on spiral coil heat exchangers. In the present study, the heat transfer characteristics and the performance of a spirally coiled finned tube heat exchanger under wet-surface conditions are theoretically and experimentally investigated. The test section is a spiral-coil heat exchanger which consists of a steel shell and a spirally coiled tube unit. The spiral-coil unit consists of six layers of concentric spirally coiled finned tubes. Each tube is fabricated by bending a 9.6 mm diameter straight copper tube into a spiral-coil of four turns. The innermost and outermost diameters of each spiral-coil are 145.0 and 350.4 mm, respectively. Aluminium crimped spiral fins with thickness of 0.6 mm and outer diameter of 28.4 mm are placed around the tube. The edge of fin at the inner diameter is corrugated. Air and water are used as working fluids in shell side and tube side, respectively. The experiments are done under dehumidifying conditions. A mathematical model based on the conservation of mass and energy is developed to simulate the flow and heat transfer characteristics of working fluids flowing through the heat exchanger. The results obtained from the present model show reasonable agreement with the experimental data.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.57-64
• /
• 2000

As a method to reduce the sue of agricultural chemicals mulching with thin plastic films has been commonly practised for many years. Although use of plastic films for mulching is very effective in preventing herb growth it is almost impossible to remove all of the plastic films from the agricultural lands and the remaining films eventually contaminate the soils. Therefore, it is very imperative to develop a mulching material that decomposes completely to prevent soil pollution problems and to enhance the competitive edge of domestic agriculture. In this paper the possibilities of using strength resins for improving strength properties of mulch papers made from old corrugated containers were examined. Also mulch papers have been produced and applied for practical farming in upland as well as paddy field. Result showed that the usage of 0.7% of wet strength additives was effective for wet and dry strength of mulch paper. Changes of various process parameters including freeness, cationic demand, one pass retention, nitrogen content, etc. that occurred during trial production of mulch paper have been examined and discussed . It was found that paper mulching was very effective for weed control both in upland field and paddy filed.