• Composites Research
• /
• 제36권1호
• /
• pp.37-41
• /
• 2023

선박의 평형수처리장치 전해조 내부 용액은 해수를 전기분해 시 DSA(Dimension Stable Anode) 전극에서 생성되는 수산화물로 인하여 높은 알칼리성 분위기를 생성한다. 본 연구에서는 기존 평형수처리장치 배관에 사용되어지는 PE 코팅 강관 배관의 취약성을 대체 가능한 복합재료로써 4가지 소재를 선정하였으며, 이들 BRE(Basalt fiber reinforced epoxy), BRP(Basalt fiber reinforced unsaturated polyester), GRE(Glass fiber reinforced epoxy), GRP(Glass fiber reinforced unsaturated polyester)를 강 알칼리성 NaOH 용액에 720시간 침지 후 마찰 및 마모 시험을 통하여 재료 마찰 깊이에 따른 마찰계수와 섬유와 수지 간 계면 결합 거동을 분석하였다. 그 결과, 수지와 섬유 간의 게면 분리 현상에 대한 메커니즘을 도출하였다. 또한, 불포화폴리에스테르와 같이 상대적으로 낮은 계면 결합력의 갖는 소재의 경우, 알칼리성 용액에 침지 시간이 길어질수록 표면에서부터 시작된 열화가 내부로 급격하게 확산되어 마찰 계수의 감소로 이어지는 경향을 나타냈다.

• 한국가스학회지
• /
• 제27권2호
• /
• pp.79-85
• /
• 2023

최근 반도체 공정은 대기업을 중심으로 4차산업에 따른 수요 증가로 메모리 반도체에서 파운드리로의 공정변화를 모색하고 있으며 10나노(nm) 공정에서 3 나노(nm)이하 공정으로의 초미세화 공정개발과 같이 산업이 확대되고 있다. 이러한 반도체 칩을 생산하기 위해 사용되는 원료인 특수가스 및 Precursor(전구체) 등의 특성은 유독성, 자연발화성, 인화성, 부식성 물질이다. 이러한 반도체 원료들은 폐쇄시스템으로 운영이 되어 정상 중에는 누출이 되지 않으나 누출 될 경우 가스박스 내부로 확산되고 가스박스 내부에서 적절한 환기가 되지 않는 경우 가스박스 외부로 확산되어 화재, 폭발을 일으키거나 독성 물질의 누출 등 큰 사고로 이어질 수 있다. 최근 반도체 산업에서 원료가 폐쇄시스템으로부터 누출되어 가스박스 내부 및 외부로 확산되는 사고 사례가 발생하고 있으나 가스박스 내부의 적정환기 시스템의 적용 이외에 적절한 예방대책을 제시한 연구 사례를 찾아 볼 수 없었다. 본 연구에서는 반도체 원료 이송배관의 연결부위인 VCR 피팅에서 원료가 누출되어 가스박스 외부로 확산된 사고사례를 바탕으로 이에 대한 예방대책을 제시하고자 한다.

• 한국결정성장학회지
• /
• 제13권1호
• /
• pp.15-18
• /
• 2003

High purity single crystalline calcium fluoride ($CaF_2$) has excellent optical transmission characteristics down to deep UV and is therefore selected as the main optical material for the next generation of lithography apparatus operating at wavelength of 157 nm. The growth of large sized $CaF_2$ single crystals with the required properties for this optical application can be achieved only by optimizing the crystal growth process by the aid of numerical simulation. This needs especially a precise calculation of the heat transport and temperature distribution in the solid and liquid $CaF_2$ under crystal growth conditions. As $CaF_2$ is considered to be semitransparent, the internal radiative heat transfer in $CaF_2$ plays an decisive role in the simulation of the heat transport. On the other hand it is very difficult to obtain quantitative experimental data for evaluating numerical models as $CaF_2$ is extremely corrosive at high temperatures. In this work we present a newly developed experimental technique to perform temperature measurements in $CaF_2$-crystal as well as in the melt under conditions of crystal growth process. These experimental results are compared to calculated temperature data, which were obtained by using different numerical models concerning the internal heat transfer in semitransparent $CaF_2$. It will be shown, that an advanced model, which was developed by the authors, gives a much better agreement with experimental data as a standard model, which was taken from the literature.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.42-48
• /
• 2001

The bend resistance of coated reinforcing bar is greatly influenced by both the adhesion strength between bar and coating materials, and the followed transformation of coating material as bars bend. Especially, tearing state or partial microscopic cracks are predicted on the inside and outside of bending angle, because tensile strength and elongation of polymer film are very different according to types of polymer dispersions in bar coating, and these damaged parts are rapidly corroded by penetration of corrosive factors. In this study, polymer cement slurry coated reinforcing bars with various polymer dispersions are prepared by following combined conditions, polymer-cement ratio of 50% and 100%, coating thickness of 250$\mu$m and 450$\mu$m, coating number, curing age of 3, 7, 14 and 28days. Then the specimens are tested for working life and bend resistance at bending angles $90^{\circ}$, $135^{\circ}$and $180^{\circ}$ to observe the microscopic damage effect as the bars bend. Also, epoxy-coated reinforcing bars for control experiment were used with 250$\mu$m of coating thickness. The tensile strength for polymer films is performed. From the test results, the working life of the polymer cement slurry is within 90 seconds. Among four types of polymer dispersion, polymer cement slurry coated reinforcing bar using St/BA-1 emulsion has the excellent bend resistance, which is remarkably improved than that of epoxy-coated reinforcing bar. And the bend resistance is more related to elongation than tensile strength of polymer film. Polymer cement slurry with a polymer-cement ratio of 100%, a coating thickness of $450\mu$m and one coating using St/BA emulsion is selected as a most suitable coating material for coated reinforcing bar.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권2호
• /
• pp.173-181
• /
• 2007

Recently, galvanizing method is predominantly being used not only a economical point of view but also due to it s stability and long life. For example, guard rail of high way, all kinds of structures for ship etc. were protected with galvanizing and demand of galvanized structural materials was being increased with more and more. However, galvanized structures were inevitably being deteriorated with time eventually because they were corroded with solution of galvanizing film and exfoliation of it s film in the present severe corrosive environment. Therefore, it is necessary to improve the corrosion resistance of the galvanizing film through various methods such as variation of chemical composition of galvanizing bath, chromate treatment and coating treatment. In this study, three test specimens such as pure galvanizing, galvarium, and chromate treatment were submerged at tap water with inhibitor addition. And the effect of their corrosion resistance improvement was comparatively investigated with electrochemical method. Corrosion current density of the galvanized steel was the largest among three specimens, however, the galvarium steel showed the lowest corrosion current density. Futhermore, these three kinds of test specimens indicated considerably excellent corrosion resistance by dipped at tap water with inhibitor addition. Especially, the galvanized steel showed the best effect of corrosion resistance improvement than other test specimens.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.363-372
• /
• 2014

In this study, we proposed a newly designed sulfuric acid transfer system for the sulfur-iodine (SI) thermochemical cycle. The proposed sulfuric acid transfer system was evaluated using a computational fluid dynamics (CFD) analysis for investigating thermodynamic/hydrodynamic characteristics and material properties. This analysis was conducted to obtain reliable continuous operation parameters; in particular, a thermal analysis was performed on the bellows box and bellows at amplitudes and various frequencies (0.1, 0.5, and 1.0 Hz). However, the high temperatures and strongly corrosive operating conditions of the current sulfuric acid system present challenges with respect to the structural materials of the transfer system. To resolve this issue, we designed a novel transfer system using polytetrafluoroethylene (PTFE, $Teflon^{(R)}$) as a bellows material for the transfer of sulfuric acid. We also carried out a CFD analysis of the design. The CFD results indicated that the maximum applicable temperature of PTFE is about 533 K ($260^{\circ}C$), even though its melting point is around 600 K. This result implies that the PTFE is a potential material for the sulfuric acid transfer system. The CFD simulations also confirmed that the sulfuric acid transfer system was designed properly for this particular investigation.

• Composites Research
• /
• 제25권2호
• /
• pp.46-53
• /
• 2012

펄트루젼 공정에 의해 생산된 FRP 부재는 길이에 제한이 없이 임의의 단면형상으로 제작할 수 있기 때문에 건설 구조용 부재로 사용하기 적합하며, 특히, 각종 화학적 유해환경 등에서 그 성능이 우수하기 때문에 습윤환경 및 해양환경 등의 부식환경에서 그 활용이 두드러지고 있다. 그러나 설계를 위한 관련 규준이 마련되어 있지 않아 이에 대한 연구가 시급한 실정이다. FRP 구조재는 대부분 단면의 효율적 사용을 위해 판요소로 구성된 박판부재를 사용하고 있으며, 이러한 부재를 압축재로 사용할 경우 강도한계상태는 주로 좌굴거동에 의해 결정된다. 이 연구에서는 FRP I형 단면 압축재에 대한 좌굴거동을 이론적으로 해석하였고, 기존 실험적 연구결과와 비교, 분석하여 설계방법 및 설계흐름도를 제안하였다. 제안된 설계방법은 ANSI/AISC 360-10의 방법과 유사한 형태로서 설계자의 편의를 도모하였으며, 비교적 간단한 방법에 의해 PFPR I형 단면 압축재의 설계를 수행할 수 있도록 하였다.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.701-708
• /
• 2008

As a countermeasure for reduction of corrosion in the delivery and distribution pipes used for tap water, materials for the pipelines in-houses and the effect of water quality on corrosivity of water pipelines were investigated in the distribution system of Han river. As the corrosion index at 6 water purification facilities of Han river, average Langelier Saturation Index (LI) of raw and finished water were -1.0 and -1.4 respectively and average Larson Index (LR) were 9.5 and 9.9, respectively. And also corrosion potential showed corrosivity in finished water (-431~-462 mV) as well as raw water (-426~-447 mV). This results indicate that tap water quality of han river have corrosivity. To understand the corrosivity effect in pipe material used for premise distribution system, water quality of stagnant tap water and tap water were analyzed and the differences between them were calculated. The difference concentration of iron, copper and zinc were $12.9{\mu}g/L$, $31.0{\mu}g/L$ and $45.0{\mu}g/L$ respectively in galvanized steel pipe for use more than 15 years and showed highest concentration. As a result, the control to corrosivity in the water pipelines, corrosivity control treatment in the water purification system can be applied. In advance it is necessary to monitor corrosivity of water quality using corrosive index because corrosivity may differ from the seasonal and regional characteristics and water chemicals dosage. For the future the guideline for corrosion index have to be established.

• Composites Research
• /
• 제26권1호
• /
• pp.66-71
• /
• 2013

말뚝은 상부구조물에 작용하는 하중을 지반에 전달하는 구조요소로서, 일반적으로 말뚝기초는 지중 또는 수면 아래 지중에 건설된다. 이러한 환경은 부식 또는 염해를 유발하여 말뚝에 손상을 야기한다. 지중 및 수중 구조요소인 말뚝이 손상될 경우, 손상에 따른 내구성을 평가하기 어려우며 추가적인 보수보강 및 유지관리 또한 어렵다. 이 연구에서는 말뚝기초의 내구성과 제작성을 개선하기 위하여 하이브리드 FRP-Concrete 합성말뚝(HCFFT)을 제안하였다. 제안된 HCFFT에 대한 유한요소해석과 실험을 실시하여, 이를 바탕으로 HCFFT의 최대하중 추정식을 제안하였다. 또한, 제안된 HCFFT의 제작과정에서의 문제점을 개선한 새로운 형태의 HCFFT의 형태를 제안하고, 유한요소해석을 실시하여 동일한 직경의 PHC 말뚝과 강관말뚝의 축방향 압축력을 HCFFT 말뚝의 축방향 압축력과 비교하여 HCFFT 말뚝의 장점을 확인하였다.

• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.182-190
• /
• 2001

A marine structural material was well known to have high tensile strength, good weldability and proper corrosion resistance. Cu-containing high strength low alloy(HSLA) steel was recently developed for their purposes mentioned above. And the steel is free about preheating for welding, therefore it is reported that shipbuilding cost by using it can be saved more or less. However the marine structural materials like Cu-containing HSLA steel are being generally adopted with cathodic protection method in severe corrosive environment like natural sea water but the high strength steel may give rise to Hydrogen Embrittlement due to over protection at high cathodic current density for cathodic protection. In this study Cu-containing HSLA steel using well for marine atructure was investigated about the susceptibility of Hydrogen Embrittlement as functions of tensile strength, strain ratio, fracture time, and fracture mode, etc. and an optimum cathodic protection potential by slow strain rate test(SSRT) method as well as corrosion properties in natural sea water. And its corrosion resistance was superior to SS400 steel, but Hydrogen Embrittlement susceptibility of Cu-containing HSLA steel was higer than that of SS400 steel. However Hydrogen Embrittlement of its steel by SSRT method was showed with pheonomena such as decreasing of fracture time, strain ratio and fracture mode of QC(quasi-cleavage). Eventually it is suggested that an optimum cathodic protection potential not presenting Hydrogen Embrittlement of Cu-containing of HSLA steel by SSRT method was from-770mv(SCE) to - 900mV(SCE)under natural sea water.