• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.115-127
• /
• 2014

Addition of fibers in cement or cement concrete may be of current interest, but this is not a new idea or concept. Fibers of any material and shape play an important role in improving the strength and deformation characteristics of the cement matrix in which they are incorporated. The new concept and technology reveal that the engineering advantages of adding fibers in concrete may improve the fracture toughness, fatigue resistance, impact resistance, flexural strength, compressive strength, thermal crack resistance, rebound loss, and so on. The magnitude of the improvement depends upon both the amount and the type of fibers used. In this paper, locally available waste fibers such as coir fibers, sisal fibers and polypropylene fibers have incorporated in concrete with varying percentages and l/d ratio and their effect on compressive, split, flexural, bond and impact resistance have been reported.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.134-140
• /
• 2014

The paper presents an overview of the present state of study on the fatigue behaviors at very high number of cycles ($N_f$ > $10^7$). A classification of materials with typical S-N curves and influencing factors such as notches, residual stresses, temperatures, corrosion environments and stress ratios are given. The microstructural inhomogeneities of materials and micro-cracks played an important roles in very high cycle fatigue behaviors. The failure mechanisms for the fatigue design of materials and components are mentioned.

• 대한조선학회논문집
• /
• 제33권2호
• /
• pp.96-110
• /
• 1996

노후선박은 부식, 피로균열 등의 구조손상을 입고 있으며, 구조손상이 심각하면 중대한 해난사고를 초래할 위험성이 높다. 선각붕괴에 의한 선박의 침몰사고를 미연에 방지하기 위하여는 구조손상에 기인된 각종 불확실성을 고려한 노후선박의 최종강도 신뢰성을 평가할 필요가 있다. 본 논문에서는 부식에 의한 선체구조부재의 판두께 감소효과를 고려하여 선체구조의 최종강도를 기준으로한 신뢰성 평가기법을 제시하였다. 이를 위해 선체구조의 부식 속도모델을 선급에서 제시하는 데이타를 바탕으로 설정하고, 부식효과를 고려한 신뢰성 한계상태방정식을 도출하였으며, 최종강도 신뢰성은 SORM (second-order reliability method)을 적용하여 계산하였다. 본 기법을 이중선체 유조선에 적용하여 선령의 증가에 따른 단면계수 및 최종강도 신뢰성의 감소특성을 고찰하였다.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.425-438
• /
• 2007

In this paper, unsettled technical controversies concerning about fatigue strength analysis for FPSO, one of the representative floaters, associated with welding types, screening methods, fabrication tolerances, corrosion margins and Morison loads are described based on yard practices. Basic theory for stochastic fatigue analysis is introduced as detail as possible. In order to resolve large parts of the controversies, a new fully stochastic fatigue analysis program for FPSO is developed.

• 산업기술연구
• /
• 제18권
• /
• pp.461-468
• /
• 1998

Service life of steel bridges depends on fatigue and corrosion. Fatigue damage result from stress concentration and initial defects in the joint of secondary member such as weldments. The objective of this study is to estimate fatigue strength of the cover plate weldments in the plate girder. For this study, fatigue tests, static tests and finete element method has been performed respectively from these results. It was found that our test results were well agreed with other test results and satisfied with the fatigue criterion of AASHTO, JSSC and EUROCODE specifications.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.201-208
• /
• 2004

To substitute conventional reinforced-concrete bridge deck, glass composite precast bridge deck - Delta Deck/sup TM/, which possesses advantages of light weight, high strength, corrosion resistance and durability, is developed for the DB24 truck load. Pultruded composite bridge deck is designed and fabricated. To verify serviceability and structural safety, finite element analysis, structural testing such as flexural test, local fatigue test, flexural fatigue test and field tests are conducted. In this paper structural characteristics of developed deck and its field application in Korea is presented.

• Tribology and Lubricants
• /
• 제22권2호
• /
• pp.73-78
• /
• 2006

The surface modification of automobile parts is of great technological importance for the improvement of corrosion resistance, wear resistance, fatigue strength and so on. Recently, research on the development of the technology of surface modification substituting 6-balance chrome process has progressively been achieved in automobile parts. Although the innovation technology for the improvement of the corrosion-resisting and wear resistant properties through post oxidation after nitrocarburising process had attracted a great attention. For this, anodically potentiodynamic polarisation testing was carried out to corrosion resistance and friction and wear experiment according to applied load and sliding distance was carried out to evaluate the wear resistance of machine structural steel with nitrocarburising and non-nitrocarburising SM45C. The presumed wear volume was calculated with the image processing far evaluation of wear resistance of two materials. The results show that the nitrocarburising had a distinguished corrosion resistance and wear resistance than non-nitrocarburising.

• 콘크리트학회논문집
• /
• 제22권2호
• /
• pp.179-186
• /
• 2010

철근과 콘크리트의 부착은 콘크리트와 철근의 일체거동에 의한 안전성 확보를 위해서도 필요하지만, 적정수준의 연성을 확보하여, 부재의 거동을 조절하기 위해서도 필요하다. 현재까지 반복하중 하에서의 부착응력-슬립관계에 대한 연구는 진행되어 왔으나, 철근 부식이 이루어진 경우의 반복하중 하에서의 부착응력-슬립관계에 대한 연구는 거의 없는 실정이다. 따라서 이 연구에서는 부식된 철근의 부착 실험을 통하여 단조하중과 반복하중 하에서의 부식률에 따른 부착응력-슬립 관계를 살펴보았다. 실험결과로부터 철근 부식은 할열 균열이 발생하기 전까지는 단조하중에서의 부착강도를 증가시키는 것을 확인하였다. 그리고 반복하중 횟수와 반복하중 하에서의 슬립 및 잔류슬립을 이중로그스케일로 도시한 결과, 철근 부식이 있는 경우에도 철근 부식이 없는 경우와 마찬가지로 선형 관계임을 확인하였다. 그리고 부식에 의한 균열이 발생하지 않는 한, 철근 부식이 반복하중 재하 이후의 부착강도 및 부착강도에서의 슬립 등 부착 특성에 영향을 미치지 않는 것도 알 수 있었다. 마지막으로, 철근 부식으로 인한 균열이후에서의 응력수준에 따른 피로수명은 급격히 감소하는 것을 확인하였다. 이 연구에서 제시하는 철근 부식을 고려한 반복하중 하에서의 부착응력-슬립의 관계는 철근콘크리트 구조물의 내구수명 예측 시 유용하게 사용될 수 있을 것으로 사료된다.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.79-84
• /
• 2009

Super duplex stainless steel has long life in severe environments by showing the enough strength and corrosion resistance. Therefore, the fracture mechanics approach needs to support the structural strength integrity for the used material. In this study, fatigue crack propagation behavior was investigated to super duplex stainless steel with 0.2% nitrogen. The various volume fraction and distribution of austenite structure for applied specimen in test were obtained by changing the heat treatment temperature and cycle. From test results, fatigue crack propagation rate showed two kinds of tendency between da/dN and ${\Delta}K$ according to distribution of austenite structure and structure anisotropy.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.6-12
• /
• 2008

Non-metallic composite overwrap repair methods utilize resin based fiber-reinforced composite materials, which have higher specific strength to weight ratio and stiffness, superior corrosion and fatigue resistance, and substantially reduced weight when compared to carbon steel. Non-metallic repair methods/systems can allow desired functional properties to be achieved at a respectable economic advantage. For example, non-metallic composite repair systems have at least a 50 year design stress of 20 ksi and approximately 25% of the short term tensile strength of fiberglass. For these systems, the contribution of the repaired steel to the load carrying capability need not be considered, as the strength of the repair itself is sufficient to carry the internal pressure. Worldwide experience in the Oil & Gas industry confirms the integrity, durability, inherent permanency, and cost-effectiveness of non-metallic composite repair or rehabilitation systems. A case study of a recent application of a composite repair system in Saudi Aramco resulted in savings of 37% for offshore subsea line and 75% for onshore above grade pipeline job. Maintaining a pipeline can be costly but it is very small in comparison to the cost of a failure. Pipeline proponents must balance maintenance costs with pipeline integrity. The purpose is not just to save money but also to attain a level of safety that is acceptable. This technology involves the use of an epoxy polymer resin based, fiber-reinforced composite sleeve system for rehabilitation and /or repair pipelines.