• The Journal of Korean Obstetrics and Gynecology
• /
• v.35 no.3
• /
• pp.105-121
• /
• 2022

Objectives: It is a statistical analysis study to examine the results of CaPSPI (Diagnostic System for Climacteric and Postmenopausal Syndrome Pattern Identification), developed for objective defecation of climacteric and postmenopausal syndrome. Methods: Total 341 people's questionnaire responses were statistically analyzed. 275 people involved in developing CaPSPI 2018 (E) and 146 people involved in 2019-2020 study of research1,3). Results: The frequency of diagnosis for examination was the highest at liver depression, 93.8% for 320 times, the lowest at heartheat, 62.8% for 214 times. The frequency of treatment for examination was the highest at liver depression, 54.3% for 185 times, and the lowest at dual deficiency of heart-spleen, 16.7% for 57 times. The diagnosis ratio was the lowest at dual deficiency of heart-spleen, 19.72%, and the highest at liver depression, 57.81%. As a result of comparing these diagnoses with the Kupperman's index, all showed significant differences. As a result of comparing these disease elements, all showed significant differences. The correlation between diagnosis and dialectic elements was found to have similar results with the korean medical pathology, and in 7 dialectics except for heartheat, the treatment version was more severe or progressing to perjury than for examination. Conclusions: The CaPSPI shows the characteristics of korean medicine well, and it is needed to utilize the high correlative disease elements to upgrade the system.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.496-507
• /
• 2023

This study investigated species identification and labeling compliance of 48 shrimp products sold in the Korean online markets. Species identification was conducted using the standard DNA barcoding method, using the cytochrome c oxidase subunit I gene. The obtained sequences were compared with those deposited in the NCBI GenBank and BOLD Systems databases. Additionally, phylogenetic analysis was performed to further verify the identified shrimp species. Consequently, 16 shrimp species were identified, including Penaeus vannamei, Pandalus borealis, Palaemon gravieri, Leptochela gracilis, Penaeus monodon, Pleoticus muelleri, Metapenaeopsis dalei, Euphausia pacifica, Lebbeus groenlandicus, Trachypenaeus curvirostris, Argis lar, Metanephrops thomsoni, Metapenaeopsis barbata, Alpheus japonicus, Penaeus chinensis, and Mierspenaeopsis hardwickii. The most prevalent species was Penaeus vannamei, found in 45.8% of the analyzed products. A significant mislabeling rate of 72.9% was found; however, upon excluding generic names such as shrimp, the mislabeling rate reduced to 10.4%. The mislabeling rate was higher in highly-processed products (89.3%) compared with that in minimally-processed products (50%). No correlation was found between the country of origin and mislabeling rate. The results of this study provide crucial data for future monitoring of shrimp products and improving the labeling of shrimp species in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.150-154
• /
• 1993

A new method is proposed for obtaining Volterra kernals of a nonlinear system by use of a nonlinear systems by use of pseudorandom M-sequences and correlation technique. M-sequence is applied to a nonlinear technique. M-sequence is applied to a nonlinear system and the crosscorrelation function between the input and the output displays not only the linear impulse response of the linear part of the system, but also crosssections of the Volterra kernals of nonlinear system. Simulations are carried out for up to 3rd order Volterra kernal, and the results show a good agreement with the theoretical considerations.

• Korean Journal of Veterinary Service
• /
• v.20 no.1
• /
• pp.37-45
• /
• 1997

The result of API staph-ident system was compared with cellular fatty acid composition for the identification of Staphylococcus species isolated from cattle. Isolated strains from cattle were correctly identified to S aureus, S intermedius, S hyicus, S simulans, S saprophyticus, S epidemis, S sciuri and S xylosus by API staph-ident system. The correlation between bacterial cellular fatty acid profile and Staphylococcus species isolated to API STAPH-IDENT system were. In conclusion, the result presented indicate that Staphylococci can be indentified to the species level by the cellular fatty acid profiles. Moreover, computerized fatty acid profile correlative anaylsis can be applied for determining identify of Staphylococcus species.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.5
• /
• pp.591-597
• /
• 1997

Instantaneous velocity distribution within coaxial circular pipe for measurement velocity of high speed is acquired simultaneously by applying the 2-dimensional PTV system consisting of a pulse generator(AOM:Acousto-Optical Modulator), a continuous-output laser and a PC image grabber together with experimental apparatus. The basic mechanism of AOM and vector identification method and performance-related image processing techniques are discussed. Representative measuring regions $90{\times}90$mm are selected and instantaneous vectors are represented and fully developed turbulent flow of maximum velocity up to about 1.0 m/sec is obtained.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.446-451
• /
• 2007

An Improved finite element model updating method to address the numerical difficulty associated with ill-conditioning and rank-deficiency. These difficulties frequently occur in model updating problems, when the identification of a larger number of physical parameters is attempted than that warranted by the information content of the experimental data. Based on the standard Bounded Variables Least-squares (BVLS) method, which incorporates the usual upper/lower-bound constraints, the proposed method is equipped with new constraints based on the correlation coefficients between the sensitivity vectors of updating parameters. The effectiveness of the proposed method is investigated through the numerical simulation of a simple framed structure by comparing the results of the proposed method with those obtained via pure BVLS and the regularization method. The comparison indicated that the proposed method and the regularization method yield approximate solutions with similar accuracy.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.209-216
• /
• 2003

There are two kinds of controllers in a continuous process system. One is for tension control of a moving web and the other for lateral motion control. The inter-connection between tension and lateral behaivior of web has not yet been considered in the analysis of web dynamics and designing of control stragagies. But the effect of tension variation on the lateral motion of a moving web is observed in the most manufacturing systems. In this paper, experimental studies was carried out to find out the inter-correlation between tension and lateral motion of a web using a 3-span web transport system which consists of two displacement type guiders. As a result, it was found that there are typical operating conditions that tension and lateral motion are correlated each other.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.9
• /
• pp.1069-1078
• /
• 2004

We propose an individual authentication method based on optical visual cryptography in thata fingerprint data is processed by secret sharing method taking into account the optical visual cryptograph and a part of shared data transmitted through an open network. Whenever it is necessary, submitting his fingerprint with the other shared information can authenticate the owner of the fingerprint. The system efficiently identifies fingerprints through optical correlation, regardless of difficulties of acquisition of exact fingerprint imagein the various environments.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.39-45
• /
• 2000

In recent years, composite materials such as fiber reinforced plastics (FRP) have gained considerable attention in the aircraft and automobile industries due to their light weight, high modulus and specific strength. In practice, control of chip formation appears to be the most serious problem since chip formation mechanism in composite machining has significant effects on the finished surface ［1,2,3,4,5］. Current study will discuss frequency analysis based on autoregressive (AR) time series model and process characterization in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized model composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlation between the different chip formation mechanisms and model coefficients are established.(omitted)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.269-282
• /
• 2009

This paper presents a novel approach for Lamb wave based structural health monitoring(SHM) in honeycomb aluminum panels. In this study, a suite of three signal processing algorithms are employed to improve the damage detection capability. The signal processing algorithms used include wavelet attenuation, correlation coefficients of power density spectra, and triangulation of reflected waves. Piezoelectric transducers are utilized as both sensors and actuators for Lamb wave propagation. These SHM algorithms are built into a MatLab interface that integrates and automates the hardware and software operations and displays the results for each algorithm to the analyst for side by side comparison. The effectiveness of each of these signal processing algorithms for SHM in honeycomb aluminum panels under a variety of damage conditions is then demonstrated.