• ETRI Journal
• /
• v.44 no.5
• /
• pp.816-825
• /
• 2022

Nondestructive testing, which can monitor a product's interior without disassembly, is becoming increasingly essential for industrial inspection. Computed laminography (CL) is widely used in this application, as it can reconstruct a product, such as a printed circuit board, into a three-dimensional (3D) high-magnification image using X-rays. However, such high-magnification scanning environments can be affected by minute vibrations of the CL device, which can generate motion artifacts in the 3D reconstructed image. Since such vibrations are irregular, geometric corrections must be performed at every scan. In this paper, we propose a geometry calibration method that can correct the geometric information of CL scans based on the image without using geometry calibration phantoms. The proposed method compares the projection and digitally reconstructed radiography images to measure the geometric error. To validate the proposed method, we used both numerical phantom images at various magnifications and images obtained from real industrial CL equipment. The experiment results confirmed that sharpness and contrast-to-noise ratio (CNR) were improved.

• International Journal of Vascular Biomedical Engineering
• /
• v.2 no.1
• /
• pp.11-16
• /
• 2004

Both flow visualizations and computational fluid dynamics were performed to determine hemodynamics in a total cavopulmonary connection (TCPC) model for surgically correcting congenital heart defects. From magnetic resonance images, an anatomically correct glass model was fabricated to visualize steady flow. The total flow rates were 4, 6 and 8L/min and flow rates from SVC and IVC were 40:60. The flow split ratio between LPA and RPA was varied by 70:30, 60:40 and 50:50. A pressure-based finite-volume software was used to solve steady flow dynamics in TCPC models. Results showed that superior vena cava(SVC) and inferior vena cava(IVC) flow merged directly to the intra-atrial conduit, creating two large vortices. Significant swirl motions were observed in the intra-atrial conduit and pulmonary arteries. Flow collision or swirling flow resulted in energy loss in TCPC models. In addition, a large intra-atrial channel or a sharp bend in TCPC geometries could influence on energy losses. Energy conservation was efficient when flow rates in pulmonary branches were balanced. In order to increase energy efficiency in Fontan operations, it is necessary to remove a flow collision in the intra-atrial channel and a sharp bend in the pulmonary bifurcation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.423-431
• /
• 2010

In this paper, a modified sum-product algorithm to correct bit errors captured within the trapping sets, which are produced in decoding of low-density parity-check (LDPC) codes, is proposed. Unlike the original sum-product algorithm, the proposed decoding method consists of two stages. Whether the main cause of decoding failure is the trapping sets or not is determined at the first stage. And the bit errors within the trapping sets are corrected at the second stage. In the modified algorithm, the set of failed check nodes and the transition patterns of hard-decision bits are exploited to search variable nodes in the trapping sets. After inverting information of the variable nodes, the sum-product algorithm is carried out to correct the bit errors. As a result of simulation, the proposed algorithm shows continuously improved error performance with increase in the signal-to-noise ratio. It is, therefore, considered that the modified sum-product algorithm significantly reduces or possibly eliminates the error floor in LDPC codes.

• Korean journal of food and cookery science
• /
• v.25 no.5
• /
• pp.586-592
• /
• 2009

Sulgidduk samples containing 2, 4, and 8% red ginseng powder and a control[ED highlight - consider specifying what the control was, if 0%, then change to Sulgidduk samples containing 0(control), 2, 4 and 8%] were examined for moisture content, color, gelatinization properties, textural characteristics, and sensory qualities to determine the optimal ratio of red ginseng powder in the formulation. The moisture contents among the samples did not differ significantly. Specifically, they ranged from 39.64 to 40.69%, and increased as the red ginseng powder content increased. Additionally, the lightness decreased and the yellowness and redness increased as the red ginseng powder content increased. Evaluation of the gelatinization properties revealed that the, peak viscosity(P), hold viscosity(H), final viscosity(F), setback, and time to peak viscosity decreased with increasing red ginseng powder content, but the breakdown and temperature to peak viscosity did not differ significantly among samples[ED highlight - please ensure my changes are correct]. The hardness and adhesiveness decreased with increasing red ginseng powder content, as did the cohesiveness, gumminess, and chewiness; however, the springiness did not differ significantly among samples. Sulgidduk containing 4% red ginseng received the highest scores for flavor, taste, texture and overallquality. Based on the above results of the sensory and texture analyses, Sulgidduk containing 4% red ginseng had the highest quality[ED highlight - please ensure my changes are correct].

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.74-85
• /
• 2012

In this paper, we propose a optical property correction technique for a low-cost heterogeneous stereoscopic camera. Three main optical properties of a stereoscopic camera are zoom, focus, and DOF(depth of field). The difference or mis-match of these properties between two stereoscopic videos are the main causes of the visual fatigue to human eyes. The proposed correction technique reduces the difference of the optical properties between the stereoscopic videos and produces high-quality stereoscopic videos. To correct the zoom difference, a LUT(look-up table) is established to match the zoom ratio between the stereoscopic videos. To correct the DOF difference, the magnitude of image edge is measured and the lens iris is changed to control the DOF of the camera. A vertical-type stereoscopic rig is developed for the experiments of the optical property correction. Based on the experimental results, we find that a low-cost heterogeneous stereoscopic camera can be implemented, which can yield low visual fatigue to human eyes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.188-195
• /
• 2002

The M-algorithm for decoding convolutional codes can significantly reduce the complexity of the Viterbi algorithm by tracking a fixed number of survivor paths in each level of the decoding trellis. It is an easily-implementable algorithm suited for real-time processing of high-speed data. The algorithm, however, generates a sequence of catastrophic errors when the correct path is not included in the set of survivor paths. In this paper, the performance of the M-algorithm obtained from using various decoding complexity levels, frame lengths, and code constraint lengths is presented. The performance gain is quantified when the algorithm is used in conjunction with codes of increased constraint length. In particular, it is demonstrated the gain from the increased code free distance overcompensates the loss from the correct path being excluded from the survivors, when the frame length is short to moderate. Using 64 survivor paths, the signal-to-noise ratio gain obtained by increasing the constraint length from K=7 to K=9, 11, 15 is respectively 0.6, 0.75, and 08dB, when the frame of length L=100 has the frame error rate of 0.01%.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.82-89
• /
• 2019

The importance of aviation safety has been emphasized recently due to the development of aviation industry. Despite the efforts of each country and the improvement of screening equipment, screening tasks are still difficult and detection failures are frequent. The purpose of this study was to examine the effect of feedback on improving signal detection performance applying a Simulated Baggage Screening Program(SBSP) for improving aviation safety. SBSP consists of three parts: image combination, option setting and experiment. The experimental images were color-coded to reflect the items' transmittance of the x-rays and could be combined as researchers' need. In the option, the researcher could set up the information, incentive, and comments needed for training to be delivered on a number of tasks and times. Experiment was conducted using SBSP and participant's performance information (hit, missed, false alarms, correct rejection, reaction time, etc.) was automatically calculated and stored. A total of 50 participants participated and each participant was randomly assigned to feedback and non-feedback group. Participants performed a total of 200 tasks and 20(10%) contained target object(gun and knife). The results showed that when the feedback was provided, the hit, correct rejection ratio and d′ were increased, however, the false alarms and miss decreased. However, there was no significant difference in response criteria(${\beta}$). In addition, implications, limitations of this study and future research were discussed.

• Journal of Korean Public Health Nursing
• /
• v.36 no.3
• /
• pp.417-430
• /
• 2022

Purpose: The purpose of this study was to develop a respiratory infection prevention program for the rural elderly in the post-coronavirus disease 2019 (COVID-19) era. Methods: The Delphi method was used to validate the contents of the program. Two rounds of Delphi surveys and one individual interview were conducted on four subjects and 16 categories with nine experts. Content validity was calculated using the content validity ratio (CVR) and coefficient of variation (CV). Results: This study verified the content validity of the existing program components, such as respiratory infection prevention characteristics, cough etiquette, correct hand washing, oral hygiene, correct tooth brushing, and exercise by walking. The study comprised 28 categories covering seven subjects, including the provision of knowledge and information about COVID-19, environmental management for respiratory infection prevention, and exercise training for immunity enhancement. Conclusion: This Delphi study examined the respiratory infection prevention program that was redesigned for the post-COVID-19 era and confirmed the validity of the educational contents. The findings of this study suggest that the program can be used practically for the prevention of respiratory infection among the rural elderly.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.638-642
• /
• 2005

For gas hydrate exploration, long offset multichannel seismic data acquired using by the 4km streamer length in Ulleung basin of the East Sea. The dataset was processed to define the BSRs (Bottom Simulating Reflectors) and to estimate the amount of gas hydrates. Confirmation of the presence of Bottom Simulating reflectors (BSR) and investigation of its physical properties from seismic section are important for gas hydrate detection. Specially, faster interval velocity overlying slower interval velocity indicates the likely presences of gas hydrate above BSR and free gas underneath BSR. In consequence, estimation of correct interval velocities and analysis of their spatial variations are critical processes for gas hydrate detection using seismic reflection data. Using Dix's equation, Root Mean Square (RMS) velocities can be converted into interval velocities. However, it is not a proper way to investigate interval velocities above and below BSR considering the fact that RMS velocities have poor resolution and correctness and the assumption that interval velocities increase along the depth. Therefore, we incorporated Migration Velocity Analysis (MVA) software produced by Landmark CO. to estimate correct interval velocities in detail. MVA is a process to yield velocities of sediments between layers using Common Mid Point (CMP) gathered seismic data. The CMP gathered data for MVA should be produced after basic processing steps to enhance the signal to noise ratio of the first reflections. Prestack depth migrated section is produced using interval velocities and interval velocities are key parameters governing qualities of prestack depth migration section. Correctness of interval velocities can be examined by the presence of Residual Move Out (RMO) on CMP gathered data. If there is no RMO, peaks of primary reflection events are flat in horizontal direction for all offsets of Common Reflection Point (CRP) gathers and it proves that prestack depth migration is done with correct velocity field. Used method in this study, Tomographic inversion needs two initial input data. One is the dataset obtained from the results of preprocessing by removing multiples and noise and stacked partially. The other is the depth domain velocity model build by smoothing and editing the interval velocity converted from RMS velocity. After the three times iteration of tomography inversion, Optimum interval velocity field can be fixed. The conclusion of this study as follow, the final Interval velocity around the BSR decreased to 1400 m/s from 2500 m/s abruptly. BSR is showed about 200m depth under the seabottom

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.473-479
• /
• 1998

Identification of rice species was attempted by three side (top, side and front) images of brown rice. Nine parameters of each image were area, aspect ratio, maximum diameter, minimum diameter, perimeter, roundness and red (R), green (G) and blue (B) pixel values of an image. Forty rice samples consisted of 19 species used for the study and total 27 image characteristics for a kernel were measured. For calibration and confirmation, 105 and 20 brown rice kernels per each sample were used respectively. For best identification of rice species, 24 image characteristics were selected for discriminant analysis. Average percentages for correct identification of rice species were 84.75% and 84.93% for calibration and confirmation data set, respectively. The highest and lowest percentage for correct identification were 99.05% for Nongan and 50.63% for Hwaseung respectively in calibration data. The confirmation data showed that the correct identification of Nongan or Paalgong was 100%, while that of Hwaseung was 47.62%. The result of the study showed that three side (top, side and front) image of brown rice was not suitable for identification of rice species suggesting that additional techniques are required for better discrimination of rice species.