• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.116-122
• /
• 1997

The audible noise produced by corona discharge in high voltage transmission lines is the most important line design consideration. In this paper, more accurate and useful formulas for predicting the A-weighted audible noise during heavy and light rain in alternative current (AC) transmission lines are proposed through comparison with the existing formulas. The proposed formulas are developed by the applications of evolutionary computations (ECs) to audible noise data base from long-term measurement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.227-230
• /
• 2003

Silicone rubber has very excellent chemical stability and hydrophobicity. A hydrophobic surface can prevent the formation of continuous water films on the surface in wet and heavily contaminated conditions. This phenomenon contributes to the suppression of leakage current and partial discharges on insulator surfaces. Silicone rubber has been used much for housing materials of polymer insulators. ATH is added to the silicone rubber for improvement of its resistance against surface discharge. In this paper, ATH with different particle size and content was added to the silicone rubber during compounding. Silicone rubber was deteriorated by a corona treatment. Hydrophobicity recovery rate after corona treatment and arc resistance of silicone rubber were investigated. Hydrophobicity recovery rate of silicone rubber was evaluated by the measurement of contact angle. Arc resistance was evaluated by measuring weight loss of silicone rubber after arc resistance test. It was observed that the hydrophobicity recovery rate and arc resistance of silicone rubber were different when different particle size and content of ATH were added.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 전기설비
• /
• pp.25-26
• /
• 2006

An electrical fault is defined as any abnormal condition caused by reduction in the insulation strength between energized conduction parts and ground or any grounded part of an electrical system. Failure of solid insulation can be caused by excessive mechanical tension being applied on the insulation, harsh service environment, aging, and also by corona phenomena. The number of empty houses during normal working hours is rising. As a result, the number of uninspected electric installation for general use is increasing. To define the potential risk of the electric installation, measurement of leakage current has been getting considered, but because the measured leakage current value also contained leakage current by capacitance, the measured value can not be adapted to absolute reference to the installation. Therefore, in this paper, the correlation between the condition of electric installation and leakage current were analyzed.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1406-1410
• /
• 2015

The railway catenary systems consist of a complex structure, electrical and mechanical conditions are exposed to dangerous environment due to current collection between pantograph and catenary systems. These two types of conditions for the catenary systems are critically assessed for management and are becoming increasingly more dependent on reliable inspection system. In this paper, a new measurement system which enables inspection of catenary faults was studied and implemented. The system uses wavelength band of ultraviolet (UV) and IR (Infrared) to measure the insulation of corona and temperature of catenary wire. In order to determine the sensitivity of implemented system, the performance test such as distance detection range of UV camera and temperature resolution of IR camera were conducted, respectively. The field test of development system was also conducted in metro and high-speed line using mobile type UV and IR multi-composited measurement systems.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.501-506
• /
• 2022

COVID-19의 영향으로 로드샵과 수많은 오프라인 매장은 예전과 달리 많은 어려움을 격고 있다. 이에 대응하기 위하여 뷰티업계에서는 고객들의 수요를 충족하고자 다양한 비대면 서비스들을 선보이고 있다. 본 논문에서는 비대면 서비스 중 모바일 환경에서 이미지 기반 퍼스널 컬러 측정 기술의 품질과 제품 추천 서비스에 대한 고찰을 진행하였다. 현재 글로벌 서비스 시장에서 많이 활용되고 있는 엔진에 대한 다양한 실험과 실제 측색 장비를 활용한 컬러 측정 데이터에 대한 비교 분석, 서비스 구현 및 지표 데이터 등으로 구성되었다. 정밀한 실험결과를 위해 일관된 실험 환경에서 실험을 진행하였다. 본 논문이 이미지 기반 피부 컬러 측정에 따른 개인화 제품 추천 서비스의 확장에 활용될 수 있기를 기대한다.