• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.45-54
• /
• 2002

This paper proposes serial test data compression, a novel DFT scheme for embedded cores in SOC. To reduce test data amounts, share bit compression and fault undetectable fault pattern compression techniques was used. A Circuits using serial test data compression method are derived from a scan DFT method including a test-per-clock technique. For an experiment of the proposed compression method, full scan versions of ISCASS85 and ISCASS89 were used. ATALANTA has been used for ATPG and fault simulation. The amount of test data has been reduced by maximum 98% comparing with original data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.44-54
• /
• 2011

The goal of this paper is reducing the test time for AMBA-based SoC. To achieve this goal, the design technique that can test several cores concurrently by reusing AMBA as TAM is proposed. The additional control logic for structural parallel core test is minimized by reusing TIC which is originally used for functional test of AMBA. SoC reliability and test time reduction can be significantly achieved with the concurrent core test technique as well as functional test.

• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.48-55
• /
• 2010

The goal of this paper is to determine optimal hardware platform for specific applications. In order to develop an understanding of how select the optimal platform, we focus upon the real-time embedded vehicle system for processing forward image and sound. In this paper we propose to measure parameters such as instructions, execution cycle, required memory size for program and data by using ARMulator. We have measured three types of processor cores: ARM7, ARM9 and ARM10. The results of the study indicated that the proposed methods could measure the minimal requirements of hardware platform for specific applications. By defining lower limit of hardware specifications in embedded systems, we can minimize expenses with suitable system performance without implementing the system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2017

Recently, with the ever-increasing complexity of industrial robot systems, it has been greatly attention to adopt a multi-core based motion controller with high cost-performance ratio. In this paper, we propose a software architecture that aims to utilize the computing power of multi-core processors. The key concept of our architecture is to use shared memory for the interplay between threads running on separate processor cores. And then, we have integrated our proposed architecture with an industrial standard compliant IDE for automatic code generation of motion runtime. For the performance evaluation, we constructed a test-bed consisting of a motion controller with Preempt-RT Linux based dual-core industrial PC and a 3-axis industrial robot platform. The experimental results show that the actuation time difference between axes is 10 ns in average and bounded up to 689 ns under $1000{\mu}s$ control period, which can come up with real-time performance for industrial robot.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.260-263
• /
• 2017

Based on several CPU cores, an SoC including ADCs, DC-DC converter and 2M-byte SRAM is proposed in this paper. The CPU core consists of a 12-bit MENSA, a 32-bit Symmetric multi-core processor, as well as 16-bit CDSP. To eliminate the external SDRAM memory, internal 2M-byte SRAM is implemented. Because the SRAM normally occupies huge area, the parasitic components reduce the speed of SoC. In this work, the SRAM blocks are divided into small pieces to reduce the parasitic components. The proposed SoC is developed in a standard 55nm CMOS process and the speed of SoC is 200MHz.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2333-2337
• /
• 2012

We report the synthesis and thermal annealing of Si-core/ZnO-shell nanorods using a two-step process comprising the metal-assisted electroless etching of Si and the sputter deposition of ZnO. Transmission electron microscopy and X-ray diffraction analysis showed that the cores of the annealed core-shell nanorods were single crystal diamond cubic-type Si, whereas the shells of the annealed core-shell nanorods were single crystal wurtzite-type ZnO. The PL spectra of Si nanorods consisted of a broad red emission band and a weaker blue emission band. The major emission band of Si nanorods was shifted from 700 nm (in the red region) to 440 nm (in the violet region) by ZnO coating. The violet emission of the core-shell nanorods was enhanced in intensity considerably by annealing in an oxidizing atmosphere. The origin of the PL enhancement by annealing is also discussed.

• Journal of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.177-187
• /
• 2003

Active galactic nuclei (AGNs) are distant, powerful sources of radiation over the entire electromagnetic spectrum, from radio waves to gamma-rays. There is much evidence that they are driven by gravitational accretion of stars, dust, and gas, onto central massive black holes (MBHs) imprisoning anywhere from $\~$1 to $\~$10,000 million solar masses; such objects may naturally form in the centers of galaxies during their normal dynamical evolution. A small fraction of AGNs, of the radio-loud type (RLAGNs), are somehow able to generate powerful synchrotron-emitting structures (cores, jets, lobes) with sizes ranging from pc to Mpc. A brief summary of AGN observations and theories is given, with an emphasis on RLAGNs. Preliminary results from the imaging of 10000 extragalactic radio sources observed in the MITVLA snapshot survey, and from a new analytic theory of the time-variable power output from Kerr black hole magnetospheres, are presented. To better understand the complex physical processes within the central engines of AGNs, it is important to confront the observations with theories, from the viewpoint of analyzing the time-variable behaviours of AGNs - which have been recorded over both 'short' human ($10^0-10^9\;s$) and 'long' cosmic ($10^{13} - 10^{17}\;s$) timescales. Some key ingredients of a basic mathematical formalism are outlined, which may help in building detailed Monte-Carlo models of evolving AGN populations; such numerical calculations should be potentially important tools for useful interpretation of the large amounts of statistical data now publicly available for both AGNs and RLAGNs.

• Journal of The Korean Astronomical Society
• /
• v.28 no.2
• /
• pp.255-264
• /
• 1995

The HII region S140 and the associated molecular cloud L1204 have been observed with 10 molecular transitions, CO (1-0), $^{13}CO$ (1-0), $C^{18}O$ (1-0), CS (2-1), $HCO^+$ (1-0), HCN (1-0), SO (${2_2}-{1_1}$), $SO_2(2_{20}-3_{13})$, OCS (8-7), and $HNCO\;(4_{04}-3_{03})$ with ${\sim}50"$ angular resolutions. More than 7,000 spectra were obtained in total. The morphology of this region shows a massive fragment (the S140 core) and the extended envelope to the northeast. Several gas condensations have been identified in the envelope, having masses of ${\sim}10^{3}M_{\odot}$ and gas number densities of ${\lesssim}10^{4}cm^{-3}$ to $3{\times}10^{5}cm^{-3}$ in their cores. The column densities of the observed molecular species toward the S140 core appear to be the typical warm clouds' abundances. It seems to be that the S140 core and L1204 have been swept up by an expanding shell called the Cepheus bubble. The large value of $L_{IR}$(embedded\;stars)/$M_{cloud}\;{\sim}\;5\;L_{\odot}$/$M_{\odot}$ of the S140 core may suggest that the star formation has been stimulated by the HII region, but the shock velocity and the pressure of the region seem to give a hint of the spontaneous star formation by the self gravity.

• Computers and Concrete
• /
• v.10 no.4
• /
• pp.409-417
• /
• 2012

The quality of high performance concrete largely depends on water cement ratio, porosity, material composition and mix methods. The uniformity of color, texture and compressive strengths are quality indicators commonly used to assess the overall characteristics of concrete mixes. The homogeneity and share of coarse aggregates play a key role in concrete quality and must be analyzed in a microscopic point of view. This research studies the quality of high performance concrete by taking drilled cores in both horizontal and vertical directions from a 1.0 $m^3$ specimen. The coarse aggregate, expressed in digitized $100{\times}116$ dpi resolution images are processed based on brightness in colors through commercial software converted into text files. With the image converting to text format, the share of coarse aggregate is quantified leading to a satisfactory assessment of homogeneity - a quality index of high performance concrete. The compressive strengths of concrete and the shares of coarse aggregate of the samples are also compared in this research study to illustrate its correlation in concrete quality. It is concluded that a higher homogeneity of aggregate exists in the vertical plane than that of the horizontal planes of the high performance concrete. In addition, the concrete specimen showing denser particle packing has relatively higher compressive strengths. The research methodology provides an easy-to-use, direct measurement of high performance concrete when conducting quality assessment in the construction site.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.43-54
• /
• 2016

In the present paper, development of the three-dimensional (3D) computational code based on Galerkin finite element method (GFEM) for solving the multigroup forward/adjoint diffusion equation in both rectangular and hexagonal geometries is reported. Linear approximation of shape functions in the GFEM with unstructured tetrahedron elements is used in the calculation. Both criticality and fixed source calculations may be performed using the developed GFEM-3D computational code. An acceptable level of accuracy at a low computational cost is the main advantage of applying the unstructured tetrahedron elements. The unstructured tetrahedron elements generated with Gambit software are used in the GFEM-3D computational code through a developed interface. The forward/adjoint multiplication factor, forward/adjoint flux distribution, and power distribution in the reactor core are calculated using the power iteration method. Criticality calculations are benchmarked against the valid solution of the neutron diffusion equation for International Atomic Energy Agency (IAEA)-3D and Water-Water Energetic Reactor (VVER)-1000 reactor cores. In addition, validation of the calculations against the $P_1$ approximation of the transport theory is investigated in relation to the liquid metal fast breeder reactor benchmark problem. The neutron fixed source calculations are benchmarked through a comparison with the results obtained from similar computational codes. Finally, an analysis of the sensitivity of calculations to the number of elements is performed.