• 한국통신학회논문지
• /
• 제32권10C호
• /
• pp.1042-1050
• /
• 2007

본 논문은 머신 기술 언어를 이용하여 전력 소모가 최소화된 임베디드 코어 자동 생성 시스템의 설계에 대해 기술한다. 머신 기술 언어를 사용하여 어플리케이션에 적합한 임베디드 코어를 빠른 시간에 설계하기 위해 어플리케이션 실행시 동적 전력 소모가 최소화된 코어를 생성하는 시스템을 구축하였다. 제안된 시스템은 각 인스트럭션의 파이프라인 스테이지의 행위 정보로부터 파이프라인 해저드를 찾아내며 처리하는 능력을 가진 임베디드 코어를 생성한다. 생성된 코어는 파워 소모가 최소화되게 만들어져 있다. 자동 생성 시스템의 검증을 위해 ARM9, MIPS R3000에 대해 SMDL로 기술하고 전력 최적화 과정을 거쳐 HDL 코드를 자동 생성하였으며, 어플리케이션에 대해 시뮬레이션을 수행하여 소모되는 전력을 측정하였다. 실험 결과로 생성된 프로세서는 정확한 동작을 수행하였고, 어플리케이션과 생성된 코어에 따라 동적 전력 소모가 $20%{\sim}40%$ 줄어드는 것을 확인하였다.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.318-321
• /
• 2011

A new Fe-based amorphous compound powder was prepared from Fe-Si-B amorphous powder by crushing amorphous ribbons as the first magnetic component and Fe-Cr-Mo metallic glassy powder by water atomization as the second magnetic component. Subsequently by adding organic and inorganic binders to the compound powder and cold pressing, the new Fe-based amorphous compound powder cores were fabricated. This new Fe-based amorphous compound powder cores combine the superior DC-Bias properties and the excellent core loss. The core loss of 500 kW/$m^3$ at $B_m$ = 0.1T and f = 100 kHz was obtained When the mass ratio of FeSiB/FeCrMo equals 3:2, and meanwhile the DC-bias properties of the new Fe-based amorphous compound powder cores just decreased by 10% compared with that of the FeSiB powder cores. In addition, with the increasing of the content of the FeCrMo metallic glassy powder, the core loss tends to decrease.

• 천문학회보
• /
• 제37권2호
• /
• pp.100.1-100.1
• /
• 2012

We present results of AKARI observations toward 8 dense molecular cores which are previously known to be "starless". These cores show some spectral features which may imply characteristic internal motions. The observations were carried out at 8 bands (3, 4, 7, 11, 65, 90, 140, and 160 micron) with IRC and FIS instruments equipped in the AKARI. The archive data of 2MASS and Spitzer were also utilized. We found that 1 (L1582A) of 8 cores has a few embedded young stellar objects (YSOs) while the rest of them are still starless. The YSOs found in L1582A are identified by the slope of the spectral energy distribution or by the AKARI color-color diagram. The unusually broad linewidth toward L1582A, which is twice broader than one of starless cores, is also consistent with the existence of protostars in this core. The physical environment and evolution of the other "starless" cores where any AKARI point source is not detected will be discussed with help of their molecular line observations.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.305-311
• /
• 2016

Purpose: The purpose of this study were to analysis of marginal adaptation of metal cores fabricated by selective laser sintering. Methods: Main model was prepared and ten stone models were fabricated. Ten single metal cores were fabricated by selective laser sintering(SLS group) and another ten single metal cores using lost wax technique and casting method were manufactured(CAST group). The marginal adaptation of metal cores were analysis using by the silicone replica technique. Silicone replicas were sectioned two times. The marginal adaptations were measured using by digital microscope. Statistical analyses was performed with independent t-test(${\bullet}{\cdot}=0.05$). Results: Means of marginal adaptations were 90.3 ${\ss}{\uparrow}$ for SLS group and 65.1 ${\ss}{\uparrow}$ for CAST group. Two groups were statistically significant differences (p < 0.05). Conclusion: Marginal adaptation of metal cores fabricated by selective laser sintering were ranged within the clinical recommendation.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.697-702
• /
• 2017

본 연구에서는 현재 운행 중인 도시철도차량의 전동차 출입문에 규칙적 다공질 금속, 즉, 트러스 요소로 이루어진 피라미드 트러스 코어를 적용 가능한가에 대해 구조 강성 측면에서 검토하였다. 전동차 출입문은 내외피 사이 심재부에 허니콤과 보강재로 구성된 샌드위치 구조이며, 충분한 굽힘 강성과 내구성 등이 요구된다. 현재, 전동차 출입문의 기계적 성능은 한국철도표준규격(KRS)과 도시철도용품 품질규격에서 명시되고 있는데, 3점굽힘시험을 수행하여 중앙부의 처짐량을 측정하여 구조강성의 만족 여부를 판정하고 있다. 기존의 허니컴 코어를 채용한 출입문에 비해 피라미드 트러스 코어로 대체한 출입문의 구조강성 비교를 위하여 기존의 허니콤 코어와 동일한 무게의 두 종류의 피라미드 트러스 코어를 설계, 고려하였다. 이후 한국철도표준규격에 명시한 시험조건에 따라 유한요소해석을 실시하였다. 피라미드 트러스 코어를 적용한 전동차 출입문의 3점굽힘해석 결과 피라미드 트러스 심재 출입문은 기존의 허니콤 심재에 비해 약 2.5%의 처짐량이 더 발생하였지만, 규격에서 요구한 강성 조건을 충분히 만족시켰다. 따라서, 다기능성에 유리한 규칙적 다공질 금속인 피라미드 트러스 심재는 기존의 허니콤 기반의 출입문을 대체할 수 있을 것으로 판단된다.

• 한국자기학회지
• /
• 제14권5호
• /
• pp.186-191
• /
• 2004

250～850 $\mu\textrm{m}$ 크기의 FeCuNbSiB 나노결정립 합금분말에 3wt%의 전기절연체(glass frits, 활석 또는 폴리아미드 분말)를 혼합한 뒤 압축성형하여 분말코아를 만들었을 때, 절연물질의 종류에 따른 자기적 특성의 변화를 조사하고 그 결과를 비교하였다. 세라믹 물질인 glass frits와 활석은 폴리아미드에 비해 수백 kHz이하의 주파수 범위에서 높은 투자율을 나타내나 1 MHz 이상의 주파수에서는 투자율이 빠르게 낮아지는 거동을 보였다 자심손실은 glass frits와 활석을 첨가한 자심 쪽이 더 크며, 품질계수는 폴리아미드를 첨가한 자심보다 더 낮은 주파수에서 피크를 나타내고 그 값도 더 작았다. 반면 폴리아미드로 절연처리한 자심의 경우 수 MHz에 이르기까지 투자율의 저하가 거의 나타나지 않았으며, 더 우수한 자심손실 및 품질계수 특성을 보여 주었다. 그리고 직류중첩특성 또한 폴리아미드를 첨가한 자심이 100 Oe이상의 큰 자장에 이르기까지 더 우수하였다. 폴리아미드를 절연체로 사용한 경우 그 밀도가 낮음으로 인해 결국 더 많은 체적비로 혼합되므로 자성 입자 사이의 전기적 절연을 보다 더 충분히 해주고 있는 것으로 판단되었으며, 세라믹 물질을 절연체로 사용했을 때와의 이상과 같은 자기적 특성의 차이는 이 사실에 주로 의존하고 있는 것으로 평가되었다.

• 대한치과기공학회지
• /
• 제34권4호
• /
• pp.353-359
• /
• 2012

Purpose: The aim of this study measured and compared the marginal and internal fit of metal cores with two base metal alloy (Ni-Cr alloy(non-beryllium), Co-Cr alloy). Methods: Maxillary right first molar abutment fabricated by titanium was prepared for this study. Impressions(10ea) were made from titanium model, and study models were poured with improved dental stone. Wax cores of twenty were prepared for burn-out and casting. Ten wax cores cast Ni-Cr alloy(non-Be), and finally ten cast Co-Cr alloy. Marginal and internal fit of cores was evaluated using silicone replica technique and digital microscope(x160). The data were statistically analyzed with the independent samples t-test (${\alpha}$ <.05). Results: Mean(standard deviation, SD) marginal and internal fit total size of Ni-Cr alloy(non-Be) group was $73.3(14.4){\mu}m$ and of Co-Cr alloy group $65.6(17.4){\mu}m$. The marginal and internal fit total size of Ni-Cr alloy group(non-Be) was statistically significantly greater than that of Co-Cr alloy group (P=.004). Conclusion: Co-Cr alloy cores in this study had a better marginal fit than Ni-Cr alloy(non-Be) cores.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.287-295
• /
• 2002

Statement of Problem. Endodontically treated teeth frequently required posts and cores to provide retention and resistance form for crowns. In spite of excellent mechanical properties of metal post and core, its metallic color can be detected through all ceramic restorations occasionally. To solve esthetic problems of metal post and core zirconia post system has been introduced recently. Purpose. The purpose of this study was to examine the fracture strength and mode of resin root analogs restored with zirconia, gold and titanium posts with resin, ceramic and metal cores after cementation with metal crowns. Materials and methods. To avoid the morphological variations of natural teeth, 40 root analogs were fabricated with composite resin. Forty resin root analogs were randomly assigned to four groups according to post and core materials: Group A: cast gold post and core and complete cast crowns, as control. Group B: titanium posts (Parapost, Coltent/Whaledent Inc., NJ, USA) and composite resin cores. Group C: zirconia posts (Cosmopost, Ivoclar AG, Schaan/Liechtenstein) and composite resin cores Group D: zirconia posts and heat-pressed ceramic cores (IPS Empress Cosmo Ingots, Ivoclar AG) After thermocycling ($5^{\circ}C{\sim}55^{\circ}C$, 30 sec.), cyclic loading was applied at 3mm below the incisal edge on the palatal surfaces at an angle of 135 degree to the long axis (2Hz, 50N, 50000cycles). Fracture strength was measured by universal testing machine (Instron, High Wycombe, UK) and fracture pattern of restored resin root analogs was also evaluated. Results and conclusion. Within the limitations of this study following results were drawn. 1. Resin root analogs restored with zirconia posts and composite resins demonstrated lowest fracture strength among tested groups. 2. There was no significant difference in the fracture strength between zirconia posts and heat pressed glass ceramic cores and cast gold posts and cores 3. The fracture strength of resin root analogs restored with titanium posts and composite resin cores was lower than that of gold posts and cores. 4. The deep oblique fracture lines were dominantly observed in root analogs restored with cast gold post and core and zirconia post and heat-pressed ceramic core groups.

• 한국자기학회지
• /
• 제15권3호
• /
• pp.191-197
• /
• 2005

철계 비정질 합금 리본을 분쇄한 뒤 상온 압축성형을 통하여 분말코아를 제조할 때 로터밀과 볼밀의 두 가지 분말제조 공정을 사용하여 만든 분말의 형상을 관찰하고, 또 이들을 이용한 분말코아의 자기적 및 전기적 특성과 미세구조를 조사하였다. 로터밀을 사용한 경우 실효투자율의 크기는 볼 밀링한 경우보다 낮았으나 이의 주파수 의존성 및 품질계수는 볼밀의 경우보다 우수하였으며 자심손실 또한 더 작았다. 한편 로터밀을 사용하여 만든 분말은 크기가 균일하고 가장자리는 강한 전단가공을 받아 완만한 곡선을 지닌 등축형을 이루고 있는 반면 볼밀을 사용한 경우는 크기가 상대적으로 불규칙하면서 작은 분말이 많고 가장자리는 날카로운 형상을 하고 있었다. 로터밀로 만든 분말코아의 낮은 투자율은 밀링시 심한 전단에 의해 발생하는 큰 내부응력의 축적에 기인하는 것으로 보여진다. 한편 로터 밀링을 통해 만든 분말코아의 경우 투자율은 상대적으로 낮지만 전기저항의 측정 및 미세구조의 관찰로부터 보다 양호한 절연상태가 확보되어 높은 주파수에 이르기까지 투자율이 유지되면서 적은 자심손실이 얻어진 것으로 판단되었다. 분말코아의 자기적 안정성을 나타내는 직류중첩특성 또한 로터밀의 경우가 볼 밀링한 경우보다 우수하였다.

• 대한치과보철학회지
• /
• 제42권5호
• /
• pp.489-500
• /
• 2004

Statement of problem: The use of zirconia prostheses fabricated with CAD/CAM system is on an increasing trend in dentistry. However, evaluation of the fit related to internal relief and marginal reproducibility of zirconia has not been reported. Purpose : This study was to evaluate the fit related to internal relief and marginal reproducibility of zirconia core fabricated with CAD/CAM system. Materials and methods: The evaluation was based on 30 zirconia cores and 5 IPS-Empress2 cores. Zirconia cores were fabricated in different conditions of internal relief(0, 10, 20, 30, 40 and $50{\mu}m$), and IPS-Empress2 cores were fabricated in accordance with the manufacturer's instructions. Before cementation, the marginal discrepancies or cores were measured on metal die. And then, each core was cemented to stone die, embedded in an acrylic resin and sectioned in two planes(mesiodistally and labiopalatally). The internal gaps were measured at the margin and axial surface. Measurements for the marginal discrepancies, the internal marginal gaps and the internal axial gaps were performed under a measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of ${\times}100$. In addition, the marginal conagurations of metal die, zirconia core and IPS-Empress2 core were examined with SEM(S-2700, Hitachi, Japan). Results : Within the limits of this study the results were as follows. 1. Compared with IPS-Empress2 cores, the marginal discrepancies of zirconia cores had no significant differences. the internal marginal gaps were statistically smaller and the internal axial gaps were statistically larger in each condition of internal relief. 2. The marginal discrepancies and the internal marginal gaps of zirconia cores had no significant differences related to the conditions of internal relief(P>0.05). 3. The internal axial gaps of zirconia cores with $0{\sim}20{\mu}$m for internal relief were significantly larger than that with $50{\mu}m$ (P<(0.0001). 4. SEM micrographs showed favorable marginal reproducibility of zirconia core and smooth texture on the milling surface. Conclusion: The marginal discrepancy and the internal gaps of zirconia core were clinically acceptable and the milling surface was showed smooth texture. For fabrication of the durable esthetic restoration, further investigations on complex design of core, milling accuracy, compatability of enamel porcelain and porcelain firing seems to be needed.