• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.798-803
• /
• 2005

This paper describes a design of AES(Advanced Encryption Standard)-based CCMP core for IEEE 802.1li wireless LAN security. To maximize its performance, two AES cores ate used, one is for counter mode for data confidentiality and the other is for CBC(Cipher Block Chaining) mode for authentication and data integrity. The S-box that requires the largest hardware in AES core is implemented using composite field arithmetic, and the gate count is reduced by about $20\%$ compared with conventional LUT(Lookup Table)-based design. The CCMP core designed in Verilog-HDL has 13,360 gates, and the estimated throughput is about 168 Mbps at 54-MHz clock frequency. The functionality of the CCMP core is verified by Excalibur SoC implementation.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.115-127
• /
• 2009

Mineral quantification was performed on sediments of the Ulleung basin by X-ray powder diffraction and the computer software based on Rietveld quantification method. The sediments are dominated by amorphous opal-A with quartz, feldspars, micas, clays, calcite, and pyrite. The opal-A shows iterative variation in abundance with increasing burial depth. In addition, the relative abundance of opal-A is coincident with abundance of organic carbon contents, indicating that the Ulleung sediment consists mostly of amorphous silica derived from organism in the pelagic environment. Upward increase in the abundance of opal-A is markedly shown in the cores located in the slope region. On the other hand, there is a distinct tendency that the abundance of calcite is inversely proportional to that of opal-A. This indicates that the abundance of opal-A increases during the rise of sea level. Also, the fall of sea level lowers the abundance of opal-A.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.869-879
• /
• 1995

TiAi intermetallic compound has been extensively studied for possible high temperature structural applications because of its high specific strength at high temperature, high creep resistance, and good oxidation resistance at elevated temperatures. In addition to its good properties, an economic manufacturing routes should be developed for this material to be used more extensively. One of the promising route in manufacturing TiAl intermetallics is the Self-propagating High-temperature Synthesis (SHS) method. Thus in this study, an attempt was made to study the mechanism of the SHS process in TiAl synthesis. The composition of the sample was Ti-(45, 50, 53)at% Al and the microstuctures of the products were analyzed using optical microscope and scanning electron microscope. When the phases formed at the main SHS reaction of whicyh combustion temperature is higher than the melting temperature of aluminum were identified as TiAl and Ti$_3$Al ; Ti$_3$Al cores surrounded by TiAl phase. In order to increase the combustion temperature, carbon was added 5 and 10at.%. When the carbon content was 10at.%, the heat of the reaction was large enough to melt the phase formed and that is consistent with the theoretical calculation results of the adiabatic temperature. The combution temperatue, which was measured by a computer data acquisition system, increased with the carbon content. The phases formed from the reaction involving the carbon added were indentified as TiAl and Ti$_2$AlC using XRD. The vickers hardness of the reaction product increased with the carbon content.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.345-348
• /
• 2013

This paper provides a method for compression and transmission of on-chip bus data. As the data traffic on on-chip buses is rapidly increasing with enlarged video resolutions, many video processor chips suffer from a lack of bus bandwidth and their IP cores have to wait for a longer time to get a bus grant. In multimedia data such as images and video, the adjacent data signals very often have little or no difference between them. Taking advantage of this point, this paper develops a simple bus data compression method to improve the chip performance and presents its hardware implementation. The method is applied to a Video Codec - 1 (VC-1) decoder chip and reduces the processing time of one macro-block by 13.6% and 10.3% for SD and HD videos, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.257-260
• /
• 2002

Dissolved oxygen level of cell culture media has a critical effect on cellular metabolism, which governs specific productivity of recombinant proteins and mammalian cell growth However, in the cores of cell aggregates or cell-immobilized beads, oxygen level frequently goes below a critical level. Mammalian cells have a number of genes induced in the lower level of oxygen, and the genes contain a common cis-acting element (-RCGTG-), hypoxia response element (HRE). By binding of hypoxia inducible factor-l (HIF-I) to the HRE, promoters of hypoxia inducible genes are activated, which is a survival mechanism. In this work, to develop a CHO cell capable of producing recombinant proteins in immobilization and high density cell culture efficiently, mammalian expression vectors containing human tissue-type plasminogen activator (t-PA) gene controlled by HRE were constructed and stably transfected into the CHO cells. In $Ba^{2+}$ -alginate immobilization culture, CHO/pCl/dhfr/2HRE-t-PA cells produced 2 folds higher recombinant t-PA activity than CHO/pCl/dhfrlt-PA cells without $CoCl_2$ treatment. Furthermore, in repeated fed batch culture, productivity of t-PA in immobilized CHO/pCI/dhfr/2HRE-t-PA cells was 121 ng/ml/day, total production of 0.968 mg/day at 11 days culture while CHO/pCIIdhfrlt-PA cells was 22.8 ng/ml/day. All these results indicate that HRE is very useful for the enhancement of protein productivity in mammalian cell cultures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1B
• /
• pp.27-38
• /
• 2005

IP Multicast has not been deployed because of hardware problems. So a new scheme that is called Overlay Multicast for group communication has been emerged. It supports IP Multicast functions, which is located on application level. For developing it, we have been focused on efficient overlay tree construction among group members with low stretch and stress. However, we should consider a variety of transmission or receipt condition since a real internet environment has users with various transmission/receipt rates. Thus, we make one-time source specific tree depending on required bandwidth informationof group members when a member requests data transmission. Our mechanism provides satisfied data quality limited maximum transmission rate of the source to each group members. Furthermore, we manage a large group enough as distributing control information to cores that are designated membersfor maintaining host member information. Lastly, we prove that our tree guarantees data quality to each group members, and show low tree consruction time is required. In addition, for evaluating group scalability, we analyze control information increasing rate via group size, and validate its scalability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.585-588
• /
• 2003

Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor powders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. AC magnetization analysis were performed in order to investigate the fraction of Bi-2223 phase in Bi-2223/Ag HTS tape. The cross sections of 55 filaments and 61 filaments were investigated after rolled in order to understand deformation mechanism of superconducting cores. We could achieve best Ic of 70 A class at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process. AC magnetization analysis was useful to investigate the fraction of Bi-2223 phase in the Bi-2223/Ag tape.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1437-1450
• /
• 1992

This paper describes the feature extraction of the interdigital regions of palm, and proposes a personal verification algorithm using the extracted features and the pattern types of those. The procedures of the feature extraction are as follows : first, the interdigital region is partitioned into several subregions, examining the phase of rigdes in each subregion, deciding the direction of that phase, and making the direction matrix of the region, we analyze this direction matrix to contain a feature pattern, and then, yield the first core. Second, applying the thinning to around the first core and tracing the thinned ridges, we yield the feature pattern types and second cores. Finally, the feature patterns coordinates included all of them are built. Then, distances and directions from each second core reaching to all the others are yielded from that coordinates. These informations are used to make a feature parameter. In our verification algorithm, such pattern types, the numbers of feature patterns, theses positions and feature parameters are used to analyze.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.3
• /
• pp.280-286
• /
• 2006

As a way to expand electric capacity in conductor with electric power demand, STACIR/AW (Super Thermal-resistant Aluminum-alloy Conductors Aluminum-clad Invar-Reinforced) conductor which has high electric current and heat resistance characteristics have been developed. STACIR/AW power line is mechanical composite wire composed of steel cores for dip control and aluminum conductors for sending electric current. Recently, to ensure stable operation and prediction of wire life span of STACIR/AW conductor, a heat property of STACIR/AW conductor have been investigated. In the present work, a change of essential property with long term-heat exposure of STACIR/AW conductor and its structure material, INVAR wire and Al conductor, have been investigated. INVAR/AW is approximately $3.2\;{\mu}m/m^{\circ}C$. thermal expansion coefficient of INVAR/AW wire increases with time of heat exposure. the thermal expansion coefficient of INVAR/AW is markedly influenced by heat and mechanical treatment. creep rate(0.242) of STACIR/AW $410\;mm^2$ conductor at room temperature is much higher than that(0.022) at $210\;^{\circ}C$ STACIR/AW $410\;mm^2$ conductor has minimum creep rate at operating temperature. To lower creep rate with increase temperature is more unique characteristics in STACIR/AW. It is expected that STACIR/AW turned its tension to INVAR/AW at the transition temperature. at room temperature, the tension apportionment of INVAR/AW in STACIR/AW is about $50\;\%$. but whole tension of STACIR/AW is placed on the INVAR/AW alone of core metal above transition temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.490-495
• /
• 2003

The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores for the blocking filter of Power Line Communication(PLC) application were investigated as a function of additives. The highest density and permeability were 4.98 g/$\textrm{cm}^2$ and 8,221, respectively and were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$ mol%, added MoO$_3$ of 400 ppm, SiO$_2$ of 100 ppm, and CaO of 200 ppm. The uniform grains were organized, and the microstructures were densified due to reduction of pores in the specimen. The permeability was increased up to 13,904 as the temperature of specimen increased to 110$^{\circ}C$. However, it was decreased precipitously under 100 over 110$^{\circ}C$. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz, and the maximum temperature of specimen was 102$^{\circ}C$ at 1 MHz. In the consequence, the Mn-Zn ferrite core developed in this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93$^{\circ}C$ in the range of 100 kHz to 450 kHz bandwidth qualified for PLC. The blocking filters were designed for single phase and three phases using the in-line and non-contact core. The best attenuation ratios of -46.46 dB and -73.9 dB were measured in the range of 100 kHz to 450 kHz bandwidth, respectively.