• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.240-257
• /
• 2006

In an effort to gain competitiveness, recently many companies are trying to outsource their logistics activities to the logistics specialists, while concentrating on their core and strategic business area. Because of this trend, the third party logistics comes to the fore, catching people's attention, and expanding its market rapidly. Under these circumstances, the third party logistics companies are making every effort to improve their logistics services and to develop an information system in order to enhance their competitiveness. In particular, among these efforts one of the critical parts is the decision support system for effective transportation network planning. To this end, this study has developed an efficient decision support system for an optimal transportation network planning by comprehensively considering the transportation mode, routing, assignment, and schedule. As a result of this study, the new system enables the expansion of the third party logistics companies' services including the multimodal transportation, not to mention one mode of transportation, and also gets them ready to plan an international transportation network.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.274-282
• /
• 2011

The ultra slim U-I and W-I primary and pick-up coils for OLEV (On-Line Electric Vehicles) are proposed. With the proposed structures, the amount and the cost of the core are dramatically reduced. Not only air gap but also the lateral displacement are improved. The proposed structures are applied to the OLEV bus and SUV, which achieve 83% efficiency at 17cm air gap with more than 60kW output power, and the construction cost is lower than ￦300M/km. The proposed coil structures are verified with simulations and experiments.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.197-198
• /
• 2015

IT 기술의 진보적 발전에 따라 클라우드 컴퓨팅 분야 연구들이 활발히 진행되고 있다. 클라우드 컴퓨팅은 가상화 기술을 이용하여 크게 인프라, 플랫폼, 소프트웨어 관점으로 나뉘어 사용자에게 다양한 서비스를 제공한다. 가상화 기술 중에 Desktop Storage Virtualization (DSV)은 분산된 레거시 데스크탑으로 구성되어 있기 때문에 비가용 상태 시간별 클러스터링 및 사용자 요청에 따른 자동 확장이 매우 중요시된다. 본 논문에서는 GPU의 many-core를 이용하여 분산된 데스크탑의 성능 상태 분석 및 자동 확장을 위해 스레드별로 호스트를 매핑하고 병렬적으로 처리하는 Rapid Auto Scaling Mechanism (RASM)을 제안한다.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.1
• /
• pp.33-39
• /
• 2019

An 1,500MW advanced power reactor required the standard design approval by a Korean regulatory body in 2014. The reactor has been designed to have a 4-train independent safety concept and a passive auxiliary feedwater system (PAFS). The full power risk or core damage frequency (CDF) of 1,500MW advanced power reactor has been reduced more than that of APR1400. However, the risk during the low power and shutdown (LPSD) operation should be reduced because CDF of LPSD is about 4.7 times higher than that of internal full power. The purpose of paper is to analysis design alternatives to reduce risk during the LPSD. This paper suggests design alternatives to reduce risk and presents sensitivity analysis results.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.34 no.1
• /
• pp.51-56
• /
• 2023

Objectives: Regression, while not a core symptom of autism spectrum disorder (ASD), has been suggested to be a distinct subtype by previous studies. Therefore, this study aimed to explore the prevalence and clinical differences between those with and without regression in children with ASD. Methods: This study includes data from toddlers and young children aged 2-7 years acquired from other projects at Seoul National University Bundang Hospital. The presence and characteristics of regression were explored using question items #11-28 from the Autism Diagnostic Interview-Revised. Chi-square and independent t-tests were used to compare various clinical measurements such as autistic symptoms, adaptative behavior, intelligence, and perinatal factors. Results: Data from 1438 young children (1020 with ASD) were analyzed. The overall prevalence rate of regression, which was mainly related to language-related skills, was 10.2% in the ASD group, with an onset age of 24 months. Regarding clinical characteristics, patients with ASD and regression experienced ASD symptoms, especially restricted and repetitive interests and behaviors, with greater severity than those without regression. Furthermore, there were significant associations between regression and hypertension/placenta previa. Conclusion: In-depth surveillance and proactive interventions targeted at young children with ASD and regression should focus on autistic symptoms and other areas of functioning.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.17-17
• /
• 2022

Leaves are an important organism for photosynthesis and transpiration. The shape of leaf is crucial factor affecting plant architecture. V-shape leaf rolling is enhancing canopy photosynthesis by increasing the CO₂ penetration and the light capture by reducing the shadow between the leaves. Therefore, moderate leaf rolling is thought to more high grain yield per area than flat leaf. We investigated 278 KRICE_CORE accession's Adaxial Leaf Rolling Index (LRI) in first heading using the following equation. For each accession, genomic DNA was used for sequencing. We sequenced the genomics with ~8 X coverage to detect SNPS. Raw reads were aligned against the rice reference (IRGSP 1.0) for SNP identification and genotype calling. To generate genotype data for GWAS, SNPs were filtered with minor allele frequency 0.05. Finally, 841,134 high-quality SNPs were used for our GWAS. The significant threshold was -log10(P)>7.23. From the results, 2 significance SNP were detected. Considering the LD block of 250kbp, 60 candidate gene were selected including Hypothetical gene and Conserved gene. In this poster, we analyzed candidate gene affecting adaxial Leaf Rolling through single-trait GWAS.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.243-243
• /
• 2022

Leaves are an important organism for photosynthesis and transpiration. The shape of leaf is crucial factor affecting plant architecture. V-shape leaf rolling is enhancing canopy photosynthesis by increasing the CO₂ penetration and the light capture by reducing the shadow between the leaves. Therefore, moderate leaf rolling is thought to more high grain yield per area than flat leaf. We investigated 278 KRICE CORE accession's Adaxial Leaf Rolling Index (LRI) in first heading using the following equation. For each accession, genomic DNA was used for sequencing. We sequenced the genomics with ~8 X coverage to detect SNPS. Raw reads were aligned against the rice reference (IRGSP 1.0) for SNP identification and genotype calling. To generate genotype data for GWAS, SNPs were filtered with minor allele frequency 0.05. Finally, 841,134 high-quality SNPs were used for our GWAS. The significant threshold was -log10(P) >7.23. From the results, 2 significance SNP were detected. Considering the LD block of 250kbp, 60 candidate gene were selected including Hypothetical gene and Conserved gene. In this poster, we analyzed candidate gene affecting adaxial Leaf Rolling through single-trait GWAS.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2010

Purpose: The purpose of this study was to evaluate the fit of zirconia core using MAD/MAM system comparing to that of conventional metal-ceramic and CAD/CAM system. Materials and methods: Duplicating the prepared resin tooth, 50 improved stone dies were fabricated. These dies are classified as a group of 5 to create the core. The groups were composed of metal-ceramic, $Cercon^{(R)}$, $Ceramill^{(R)}$, $Rainbow^{TM}$, and $Zirkonzhan^{(R)}$. Each core was cemented to stone die, and then, absolute marginal discrepancy was measured with microscope at a magnification of ${\times}50$. Statistical analysis was done with one-way ANOVA test and Tukey's HSD test. Results: The mean absolute marginal discrepancy for metal-ceramic was $51.97{\pm}23.38{\mu}m$, for $Cercon^{(R)}$ was $62.16{\pm}25.88{\mu}m$, for $Ceramill^{(R)}$ was $67.64{\pm}40.38{\mu}m$, for $Rainbow^{TM}$ was $125.07{\pm}42.19{\mu}m$, and for $Zirkonzhan^{(R)}$ was $105{\pm}44.61{\mu}m$. Conclusion: 1. Fit of margin was identified as in the order of metal-ceramic, $Cercon^{(R)}$, $Ceramill^{(R)}$, $Zirkonzhan^{(R)}$, and $Rainbow^{TM}$. 2. Absolute marginal discrepancy of the zirconia core that designed by MAD/MAM system had significant differences in order of $Ceramill^{(R)}$, $Zirkonzhan^{(R)}$, and $Rainbow^{TM}$. 3. The mean absolute marginal discrepancy between $Cercon^{(R)}$ and $Ceramill^{(R)}$ did not show significant differences.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.235-246
• /
• 1996

Placer gold in collected heavy minerals from several localities in Huongkhe area, is consistently very finegrained (${\leq}100$ to $400{\mu}m$). The size and size distribution show somewhat differences at Dongdo and Hoahai : at Dongdo, predominant relatively larger and wide distribution; at Hoahai, characteristic relatively finer and narrow distribution range. The morphology of gold grains is divided into the four groups assumed by the dimension ratio : spherical, subprismoidal, prismoidal, and irregular. The gold grains at Dongdo show wide morphological distribution, whereas, at Hoahai, spherical form is predominant (${\approx}75%$). Three main types of gold are classified based on their chemical composition and mode of occurrence: type I (electrum; fineness=568~931), type II (amalgam; fineness=671~927), and type III (native gold; fineness=923~999). Type I gold contains, relatively high and variable silver contents (${\approx}11$ to 58 atomic % Ag), and has been classified into two subtypes based on their silver contents (type IA, ${\approx}11{\sim}39$ atomic % Ag; type IB, ${\approx}40{\sim}58$ atomic % Ag). However, type I gold would have been generally original compositions of electrum which originated at the provenance deposits. Mercury reacts with gold and silver to form amalgam (type II gold) which has variable Hg contents (1.2~30.5 atomic % Hg). The mercury contents in gold grains at Hoahai (10.9~30.5 atomic % Hg) are higher than those at Dongdo (5.8~21.1 atomic % Hg). The gold grains from the area generally exhibit a high-purity gold (type III) rim. The individual rims on the various grains range from <1 to $80{\mu}m$ in thickness and have silver contents of <10 atomic percent Ag, even though the core compositions range from ${\approx}11$ to 58 atomic percent Ag. The rim of gold most likely is responsible for the commonly cited cases of gold from placer deposits assaying at higher values of fineness than the gold in the corresponding source lode. The gold-rich rim in the Huongkhe area apparently forms by a combination of self-electrorefining and preferential dissolution of silver under oxidizing nature during the weathering and transport process. All data of gold grains in the Huongkhe area suggest that the transport distances and/or time of placer gold at Hoahai are generally farther than those at Dongdo. The mercurian gold bearing provenance deposits at Dongdo and Hoahai would be suggest nearest epithermal gold-silver vein-type.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.3
• /
• pp.142-168
• /
• 2000

The granites distributed in the Kyongsang basin contain the rocks which are different from the host rocks, and they are known as magic microgranular enclaves. The genesis of the magic micro-granular enclaves can be divided into four types: (1) rock fragments from country rocks; (2) cumulation of the early crystals in host magma or disruption of early chilled borders; (3) magma mingling; and (4) restite. These enclaves can be easily found in the granites around Mt. Wonhyo, Yangsan city. They are ellipsoidal in shape, and have phenocrysts might be originated from the host rocks and sharp contacts with the granites. Under the microscope, textures such as oscillation zoning, horn-blende-mantled quartz, rapakivi texture, and acicular apatite are observed, and these indicate that the enclaves were originated from magma and then produced by chilling. The evidences showing that the enclaves were formed by magma mingling are: (1) petrographical characteristics; (2) similarity of the compositions between the rim of plagioclase in the enclave and plagioclase in the granite; (3) linear trends of the major elements; (4) total REE content of the enclaves; and (5) Textural and compositional variations from rim to core in zoned enclaves. The magic end member of the enclave is regarded as the aphyric basaltic andesite in Mt. Sinbul-Youngchui area. The granites around Mt. Wonhyo experienced the magma mingling process which was produced by the injection of mafic magma at about 70 Ma, during the crystal differentiation, and then continued the crystallization. The equigranular granites and the micrographic granites in the study area are considered as the results after the magma mingling process.