• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.21-26
• /
• 2016

산업체에서 널리 사용되고 있는 유도전동기의 회전자를 제작하기 위하여 rotor core slot에 Cu bar를 열박음(shrinkage fit)작업으로 고정한 후 bar 표면을 punch로 원주방향으로 순차적으로 1.5~3mm 압입(swaging)작업시 rotor core slot과 bar 접촉면에 작용하는 contact tangential force의 크기와 분포를 단순화된 2차원 plane strain 해석모델을 사용하여 각각의 압입조건에 대하여 평가하였으며 또한 생산성 향상을 고려한 rotor core slot 설계시 slot 형상에 따른 접촉력 분포를 평가하여 rotor core slot 설계시 필요한 정보를 제공하고자 수치해석적인 방법을 사용하여 parametric study를 수행하였다. 이러한 탄소성 수치해석 결과 1) rotor core 압입작업시 bar 접촉면에 작용하는 contact force는 소성변형이 먼저 발생하는 bar 상부에 크게 작용하며 2) 순차적인 rotor core 압입작업시 bar 접촉면에 작용하는 total contact force는 바로 인접한 bar에 대한 압입작업에 의해서만 영향을 받으며 그 영향으로 약 55% 정도 total contact force가 증가하며 3) 생산성을 고려하여 rotor core를 설계하는 경우에 contact force를 증가시키기 위해서는 core slot의 폭보다 길이를 길게 하는 것이 바람직하다는 사실을 알 수 있었다.

• 한국인터넷방송통신학회논문지
• /
• 제15권5호
• /
• pp.219-224
• /
• 2015

최근에 멀티코어 프로세서 구조가 디지털 신호처리 프로세서의 성능을 개선하기 위하여 광범위하게 이용되고 있다. 이러한 멀티코어 프로세서는 크게 대칭적 구조와 비대칭적 구조로 나뉜다. 비대칭적 멀티코어 프로세서는 대칭적 멀티코어 프로세서에 비하여 더욱 성능이 높고 효율적이라고 알려져 있다. 본 논문에서는 비대칭적 멀티코어 디지털 신호처리 프로세서가 대칭적 멀티코어 디지털 신호처리 프로세서에 대하여 갖는 성능의 우수성을 고찰하기 위하여, 다양한 구성을 갖는 비대칭적 쿼드코어, 옥타코어 및 헥사데카코어 디지털 신호처리 프로세서에 대하여 UTDSP 벤치마크를 입력으로 하여 모의실험을 수행하여 그 성능을 측정하고 비슷한 하드웨어 규모의 대칭적 멀티코어 디지털 신호처리 프로세서와 그 성능을 비교하였다.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.467-482
• /
• 2022

One of the major failure modes in composite sandwich structures is the separation between skins and core. In this study, the effect of employing foam filled composite corrugated core on the skin/core debonding (resistance to separation between skin and core) is investigated both experimentally and numerically. To this aim, triangular corrugated core specimens are manufactured and compared with reference specimens only made of PVC foam core in terms of skin/core debonding under bending loading. The corrugated composite laminates are fabricated using the hand layup method. Also, the Vacuumed Infusion Process (VIP) is employed to join the skins to the core with greater quality. Utilizing an End Notched Shear (ENS) fixture, three point bending tests are performed on the manufactured sandwich composite panels. The results reveal that the resistance to separation capacity and flexural stiffness of sandwich composite has been increased about 170% and 76%, respectively by using a triangular corrugated core. The Cohesive Zone Model (CZM) with appropriate cohesive law in ABAQUS finite element software is used to model the progressive face/core interfaces debonding the difference between experimental and numerical results in predicting the maximum born load before the skin/core separation is about 6 % in simple core specimens and 3% in triangular corrugated core specimens.

• Design & Manufacturing
• /
• 제8권2호
• /
• pp.7-11
• /
• 2014

The Core-Shift is often generated on injection mold which have thin and long core. And Core-Shift brings out problems for thickness variation and product ejecting process. In this study, analysis of Core-Shift was performed according to change of materials of core(steel P-20, Be-Cu) and various polymers(PP, PC) by using MoldFolw MPI 6.1 which is commercial injection molding analysis program. As the results of analysis, the magnitude of Core-Shift was increased as being use polymer had lower fluidity and lower rigidity core. In the future, we will study the relationship between amount of Core-Shift and ejecting force.

• 한국주조공학회지
• /
• 제9권5호
• /
• pp.403-412
• /
• 1989

This study has been carried out to investigate into the properties of molding sands containing various core sands, $CO_2$, Shell, Furan, Pep Set and Cold Box, in the system sands using domestic active bentonite. The properties of system sands with 5% bentonite and 3% moistures containing baked core sands and no-baked core sands were varied by the ratio of core sands. The system sand containing no-baked core sands had been the poor bonding force and rough grain surface than those of the baked core sands. The L. O. I of system sand containing 30% organic binders core sands were more than inorganic binders core sands. It has been found that the no-baked core sands were necessary have to reclaim for using molding sand.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.113-121
• /
• 2013

This paper introduces a simple core loss calculation method for output filter inductor in pulse width modulation (PWM) DC-AC inverter. Amorphous C-core (AMCC-320) is used to analyze the core loss. In order to measure core loss of the output filter inductor and validate the proposed method, a single-phase half-bridge inverter and a calorimeter are used. By changing switching frequency and modulation index (MI) of the inverter, core loss of the AMCC-320 is measured with the lab-made calorimeter and the results are compared with calculated core loss. The proposed method can be easily extended to other core loss calculation of various converters.

• 한국통신학회논문지
• /
• 제17권8호
• /
• pp.816-822
• /
• 1992

본 논문에서는 중심코어가 사다리꼴분포를 갖는 segmented core 단일모드 광섬유의 전파특성을 \ulcorner=1.55um에서 영분산을 만족하는 조건하에서 상대 굴절율차비의 변화에 대해 이론적으로 조사하였다. 기존의 광섬유(삼각형 굴정율, 이중형 코어)와 곡률손실을 비교한 결과 크게 감소함을 확인하였다. 그리고 코어내의 모드필드의 집속효과가 기존의 사다리꼴 굴절율 광섬유보다 28% 더 향상되었다. 기존의 삼각형 분포를 갖는 segmented core 광섬유와 비교하여 여러 장점들을 제시 하였다.

• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.351-356
• /
• 2010

Purpose: The purpose of this study was to evaluate the fracture strength between the core and veneering ceramic according to 2 core materials, In-Ceram Alumina and In-Ceram Zirconia, fabricated by electro ceramic layering technique. 2 different fixed partial denture cores of three units were veneered by veneering ceramic(Ceranion, Noritake) (n=10). Methods: The fracture strengths between the core and veneering ceramic were measured through the 3 point bending test. The interfaces between the core and veneering ceramic were observed with the X-ray dot mapping of EPMA. Results: The result of fracture strength was observed that IZP group, In-Ceram Zirconia core, had higher fracture strength. IPA group, In-Ceram Alumina core, had fracture strength of 359.9(${\pm}$86.2) N. IZP group, In-Ceram Zirconia core, had fracture strength of 823.2(${\pm}$243.0) N. X-ray dot mapping observation showed that a major element in the core and veneering ceramic of IPA group was alumina and silica, respectively. No binder was observed in interfaces between the core and veneering ceramic, and no ion diffusion or transition was observed between the core and veneering ceramic. However, apparent ion diffusion or transition was observed between the core and veneering ceramic of IZP group.

• 한국환경복원기술학회지
• /
• 제12권4호
• /
• pp.1-10
• /
• 2009

This study has intended to build ecological networks in consideration of life-zones inside Cheongju city through biotope grade, GIS network analysis etc. This study consisted of following three steps. First, we selected core districts and core spot districts using land use patten and biotope grade. The core district included the first grade of biotope and forest land. The core district consisted of two sectors : east axis core, Uam mountain; west axis core, Bumo mountain. The core spot district included the first grade of biotope. The core spot districts consisted of two sectors : north axis base core, Myongshim park; south axis base core, Guryong park. Second, the base district included the second grade of biotope and park and school. We used buffering analysis within 500m of the base district and selected the new base district. Third, we connected core districts and base core districts using least cost analysis of GIS. Thus we built comprehensive ecological networks in consideration of life-zones through GIS.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.43-47
• /
• 2002

The new core making method economizing the amount of core sand has been requested. The new method is that a core box is heated until it reaches reasonable temperature and then core sand with core binder is sprayed into the core box. Since inner temperature distribution have to be uniform in order to form uniform thickness of core, we studied inner temperature distribution of core box. First, we determined proper number of torches and optimized torch positions to minimize the average of absolute deviation(AVEDEV) of inner temperature. The results are as fellowed: 1. The number of torches that enables uniform inner temperature distribution about $300^{\circ}C$ is 25. 2. When $S_H$ and $S_V$ is 0.7, the torch positions are optimized and AVEDEV is 5.85.