• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.43-47
• /
• 2002

The new core making method economizing the amount of core sand has been requested. The new method is that a core box is heated until it reaches reasonable temperature and then core sand with core binder is sprayed into the core box. Since inner temperature distribution have to be uniform in order to form uniform thickness of core, we studied inner temperature distribution of core box. First, we determined proper number of torches and optimized torch positions to minimize the average of absolute deviation(AVEDEV) of inner temperature. The results are as fellowed: 1. The number of torches that enables uniform inner temperature distribution about $300^{\circ}C$ is 25. 2. When $S_H$ and $S_V$ is 0.7, the torch positions are optimized and AVEDEV is 5.85.

• The Journal of Korean Physical Therapy
• /
• 제31권2호
• /
• pp.103-110
• /
• 2019

Purpose: This study evaluated the usefulness of International Classification of Functioning, disability and health core set for children and youths with cerebral palsy (ICF-core set for CP) by comparing the Gross Motor Function Measure-88 (GMFM-88), which is the most widely used outcome measure in children with cerebral palsy (ICF-core set for CP). Method: One subject (Female, 14) was evaluated by GMFM-88 and ICF-core set for CP. In addition, the concept of GMFM-88 was compared with the concept of the ICF-core set for CP in compliance with ICF linking rules. The numerical values both of the GMFM-88 categories and the ICF-core set for CP's items were compared. Results: The ICF b760 was linked to the GMFM-88 59~61. d415 was linked to 57~58 of GMFM-88. d450 was linked to GMFM-88's 65~72. d455 was linked to GMFM-88 at 77and 80~83. Conclusion: The association of the ICF-core set for CP and GMFM-88 was confirmed. In addition, the number of categories of ICF-core set for CP was smaller than the number of items of GMFM-88. In conclusion, the ICF-core set for CP is an evaluation tool that can identify the various features of children. In addition, GMFM-88 was linked to the ICF core set for CP according to the ICF linking rules.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.281-292
• /
• 2008

Prefabricated Board Drains (PBDs) recently become more widely used than conventional sand drains in improving soft ground because the PBD is more time and cost effective. The performance of PBDs is affected by disturbance in the adjacent soil formation during inserting mandrels, the intrusion of fine particles into filter fabric, and necking of the drain by excessive lateral pressure especially occurring in very deep clay formation such as the Busan New Port site. In this study, the PBD with double-core is introduced, which seems to overcome the shortcomings of usual single-core PBDs. An in-situ test program was established in the Busan New Port site, in which a set of the double-core PBDs and the single-core PBDs was installed to compare the efficiency of each of the drains. The discharge capacity of the double-core and the single-core PBDs was compared for various confining pressures in the modified Delft test and the chamber test. A series of CRS consolidation tests was performed in order to obtain profiles of void ratio-effective stress and void ratio-permeability relationships in the Busan New Port site that are used as input date in performing a numerical program ILLICON. The numerically simulated settlements of ground surface in the test site are in good agreement with those of in-situ measurements. In addition, the performance of the double-core and single-core PBDs has been experimentally and numerically compared in this paper.

• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.1-8
• /
• 2005

During magnetic inrush or over-excitation, saturation of the core in a transformer draws a significant exciting current, which can cause malfunction of a current-differential relay. This paper proposes a modified-current-differential relay for transformer protection. The relay calculates the core-loss current from the induced voltage and the core-loss resistance as well as the magnetizing current from the core flux and the magnetization curve. Finally, the relay obtains the modified differential current by subtracting the core-loss and the magnetizing currents from the conventional differential current. A comparative study of the conventional differential relay with harmonic blocking is presented. The proposed relay not only discriminates magnetic inrush and over-excitation from an internal fault, but also improves the relay speed.

• Biomolecules & Therapeutics
• /
• 제21권2호
• /
• pp.97-106
• /
• 2013

Chronic hepatitis C virus (HCV) infection is responsible for the development of liver cirrhosis and hepatocellular carcinoma. HCV core protein plays not only a structural role in the virion morphogenesis by encapsidating a virus RNA genome but also a non-structural role in HCV-induced pathogenesis by blocking innate immunity. Especially, it has been shown to regulate JAK-STAT signaling pathway through its direct interaction with Janus kinase (JAK) via its proline-rich JAK-binding motif ($^{79}{\underline{P}}GY{\underline{P}}WP^{84}$). However, little is known about the physiological significance of this HCV core-JAK association in the context of the virus life cycle. In order to gain an insight, a mutant HCV genome (J6/JFH1-79A82A) was constructed to express the mutant core with a defective JAK-binding motif ($^{79}{\underline{A}}GY{\underline{A}}WP^{84}$) using an HCV genotype 2a infectious clone (J6/JFH1). When this mutant HCV genome was introduced into hepatocarcinoma cells, it was found to be severely impaired in its ability to produce infectious viruses in spite of its robust RNA genome replication. Taken together, all these results suggest an essential requirement of HCV core-JAK protein interaction for efficient production of infectious viruses and the potential of using core-JAK blockers as a new anti-HCV therapy.

• 정보처리학회논문지C
• /
• 제10C권7호
• /
• pp.885-890
• /
• 2003

코어 기반 트리(CBT：Core Based Tree) 멀티캐스트 라우팅은 인터넷을 위한 멀티캐스트 라우팅 프로토콜이다. CBT는 멀티캐스트 연결을 위해 하나의 공유 트리를 구성하고, 이 공유 트리는 코어라는 센터 노드를 루트로 한다. 코어 기반 트리 멀티캐스트 라우팅에서 코어의 위치 선정은 비용과 성능 측면에 많은 영향을 끼치고, 코어의 배치 방법은 네트워크 토폴로지에 따라 달라진다. 본 논문에서는 간단하고 효율적인 코어 선택 방법을 제안하고자 한다. 제안한 방법은 거리 벡터 정보를 필요로 하며, 추가적으로 표본 상관 계수 결과를 이용하여, 멀티캐스트 그룹에 속해있는 멤버들의 배치상태에 따라 적합한 라우팅 알고리즘으로 최소평균비용을 갖는 노드를 코어로 선정하는 방법, 또는 PIM-SM 방법을 선택하는 것이다. 제안한 방법의 성능은 평균지연, 최대 지연, 총 비용과 같은 세부적인 실험을 통해 기존연구와 비교하였으며, 실험 결과 제안한 코어 선택 방법이 매우 효율적임을 알 수 있었다.

• 산업경영시스템학회지
• /
• 제46권2호
• /
• pp.47-56
• /
• 2023

This study identified the core competencies of aircraft maintenance quality engineers and compared the importance and retention of core competencies. Through literature research, 21 core competencies were derived in three areas of management technology, elemenal technology and collaboration technology, and a survey was conducted on the importance and retention of core competencies for 42 aircraft maintenance quality engineers. As a result of the survey, the importance of all core competencies of aircraft maintenance quality engineers is 3.95/5 on average, and the retention of all core competencies is 3.99/5 on average. 'Risk Management', 'Creating Document', 'Honesty/Moral' were identified as the most important competencies in each area, and 'Quality Management', 'Language', 'Honesty/Moral' were identified as the most possessed competencies in each area. An IPA (Importance-Performance Analysis) was performed to analyze the details. Through IPA, 'Risk Management' and 'Safety Management' were evaluated as having a low degree of retention compared to a high level of importance. Therefore, they were identified as a core competencies that need to be improved first. In addition, the characteristics of each core competency and the recognition level in the field were also identified. This study will be helpful in defining the roles and functions of aircraft maintenance quality engineers to improve flight quality and prevent aviation accidents.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.361-364
• /
• 2002

This paper discusses the influencing factors such as coring position, height to diameter ratio of core specimen(h/d) and coring torque on the strength estimation of concrete by small site coring method in order to verify the validities of small size core method. According to results, as for the influence of drilling position, when core specimens are obtained from the place parallel to placing direction, compressive strength of core specimens are higher than those perpendicular to placing direction. This is due to the loss of the area of core specimen perpendicular to plating direction by bleeding. And in case of $\phi$ 24mm core specimen, when vertical drilling against placing direction is taken. compressive strength of core specimen obtained at the bottom of the structure is higher than that at the top of the structure. As for the influence of height to depth ratio, as h/d ratio increases compressive strength shows to be decreased. As for the influences of rotation speed of drilling machine, as its speed goes up, compressive strength decreases, regardless of core diameter.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.709-714
• /
• 2006

본 연구는 폐기물로 발생되는 부산석회 Core를 연속식 칼럼에 적용하여 수중의 인산염을 효과적으로 제거할 수 있는 방안을 찾고자 수행되었다. 부산석회와 인산염의 칼럼 반응에서 Hydroxyapatite을 형성하여 수중의 인산염을 제거할 수 있는 것으로 나타났으며 부산석회 Core size 1, 2에서 유입수의 인산염 농도에 관계없이 초기 11시간동안 90% 이상의 높은 제거율을 보였다. 또한 부산석회 Core size와 관계없이 유입수 유량이 증가할수록 파과시간이 줄어드는 것을 알 수 있었다.

• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.288-299
• /
• 2003

Statement of problem: Many kinds of post and core systems are in the market, but there are no clear selection criteria for them. Purpose: The purpose of this study was to compare the flexural strength and modulus of elasticity of core materials, and measure the bending strength of post systems made of a variety of materials. Material and Methods: The flexural strength and elastic modulus of thirteen kinds core buildup materials were measured on beams of specimens of $2.0{\times}2.0{\times}24{\pm}0.1mm$. Ten specimens per group were fabricated and loaded on an lnstron testing machine at a crosshead speed of 0.25mm/min. A test span of 20 mm was used. The failure loads were recorded and flexural strength calculated with the measured dimensions. The elastic modulus was calculated from the slopes of the linear portions of the stress-stram graphs. Also nine kinds commercially available prefabricated posts made of various materials with similar nominal diameters, approximately 1.25mm, were loaded in a three-point bend test until plastic deformation or failure occurred. Ten posts per group were tested and the obtained data were anaylzed with analysis of variance and compared with the Tukey multiple comparison tests. Results: Clearfil Photo Core and Luxacore had flexural strengths approaching amalgam, but its modulus of elasticity was only about 15% of that of amalgam. The strengths of the glass ionomer and resin modified glass ionomer were very low. The heat pressed glass ceramic core had a high elastic modulus but a relatively low flexural strength approximating that of the lower strength composite resin core materials. The stainless steel, zirconia and carbon fiber post exhibited high bending strengths. The glass fiber posts displayed strengths that were approximately half of the higher strength posts. Conclusion: When moderate amounts of coronal tooth structure are to be replaced by a post and core on an anterior tooth, a prefabricated post and high strength, high elastic modulus core may be suitable. CLINICAL IMPLICATIONS In this study several newly introduced post and core systems demonstrated satisfactory physical properties. However when the higher stress situation exists with only a minimal ferrule extension remaining a cast post and core or zirconia post and pressed core are desirable.