• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.259-265
• /
• 2014

When the trace-driven simulation is used for the performance analysis of widely used multicore processors in the initial design stage, much time and disk space is necessary. In this paper, statistical simulations are performed for a high performance multicore processor with various hardware configurations. For the experiment, SPEC2000 benchmarks programs are used for profiling and synthesizing new instruction traces. As a result, the performance obtained by our statistical simulation is comparable to that of the trace-driven simulation with the benefit of tremendous reduction in the simulation time.

• Perspectives in Nursing Science
• /
• v.8 no.2
• /
• pp.86-96
• /
• 2011

Purpose: This study examined the effects of simulation-based education on knowledge about and self-confidence in maternity nursing care in senior students. Methods: One group, pre-post design, was utilized with 28 students. The simulation-based maternity nursing education that consisted of two sessions each 2 hours long for intrapartum and postpartum care was provided to 4 small groups. An expert panel of 3 maternity clinical instructors developed the module with a high-fidelity maternal simulator. Core items of knowledge about and self-confidence in maternity nursing care were measured with 13 items before and after the sessions. Results: The knowledge score did not increase significantly (z=-1.95, p=.05); however, self-confidence in maternity nursing care showed a significant change in the posttest (z=-2.82, p<.001). The subjective evaluation of the students indicated that the simulation-based education was helpful in preparing for clinical practicum as far as interaction with clients, psychological readiness to practice, and learning efficiencies. Conclusion: The simulation-based nursing education was useful in improving self-confidence in clinical performance for childbirth and postpartum care in nursing students. Along with the application of diverse scenarios in simulations, modules with standard patients and role-plays are also recommended for maternity nursing practicum to empower the competency of the students.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1519-1526
• /
• 2010

The behavior of peptide or protein solutes in saline aqueous solution is a fundamental topic in physical chemistry. Addition of ions can strongly alter the thermodynamic and physical properties of peptide molecules in solution. In order to study the effects of added ionic salts on protein conformation and dynamics, we have used the molecular dynamics (MD) simulations to investigate the behavior of Staphylococcus aureus Hfq protein under two different ionic concentrations: 0.1 M NaCl and 1.0 M NaCl in presence and absence of RNA (a hepta-oligoribonucleotide AU5G). Hfq, a global regulator of gene expression is highly conserved and abundant RNA-binding protein. It is already reported that in vivo the increase of ionic strength results in a drastic reduction of Hfq affinity for $Q{\beta}$ RNA and reduces the tendency of aggregation of Escherichia coli host factor hexamers. Our results revealed the crucial role of 0.1 M NaCl Hfq system on the bases with strong hydrogen bonding interactions and by stabilizing the aromatic stacking of Tyr42 residue of the adjacent subunits/monomers with the adenine and uridine nucleobases. An increase in RNA pore diameter and weakened compactness of the Hfq-RNA complex was clearly observed in 1.0 M NaCl Hfq system with bound RNA. Aggregation of monomers in Hfq and the interaction of Hfq with RNA are greatly affected due to the presence of high ionic strength. Higher the ionic concentration, weaker is the aggregation and interaction. Our results were compatible with the experimental data and this is the first theoretical report for the experimental study done in 1980 by Uhlenbeck group for the present system.

• Composites Research
• /
• v.17 no.1
• /
• pp.29-37
• /
• 2004

Honeycomb sandwich composite(HSC) structures have been widely used in aircraft and military industry owing to their light weight and high stiffness. Mechanical properties of honeycomb core materials are needed for accurate analysis of the sandwich composites. In this study. theoretical formula for effective elastic modulus and Poisson's ratio of honeycomb core materials was established using an energy method considering the bending, axial and shear deformations of honeycomb core walls. Finite-element analysis results obtained by using commercial FEA code, ABAQUS 6.3 were comparable to the theoretical ones. In addition, we performed tensile test of HSC plates and analyzed deformation behaviors and interlaminar stresses through its FEA simulation. An increased shear stress along the interface between surface and honeycomb core layers was shown to be the main reason for interfacial delamination in HSC plate under tensile loading.

• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.91-105
• /
• 2017

Thermal hydraulic (TH) analysis of nuclear power reactors is utmost important. In this way, the numerical codes that preparing TH data in reactor core are essential. In this paper, a subchannel analysis of a Russian pressurized water reactor (WWER1000) core with enhanced numerical code is carried out. For this, in fluid domain, the mass, axial and lateral momentum and energy conservation equations for desired control volume are solved, numerically. In the solid domain, the cylindrical heat transfer equation for calculation of radial temperature profile in fuel, gap and clad with finite difference and finite element solvers are considered. The dependence of material properties to fuel burnup with Calza-Bini fuel-gap model is implemented. This model is coupled with Isotope Generation and Depletion Code (ORIGEN2.1). The possibility of central hole consideration in fuel pellet is another advantage of this work. In addition, subchannel to subchannel and subchannel to rod connection data in hexagonal fuel assembly geometry could be prepared, automatically. For a demonstration of code capability, the steady state TH analysis of a the WWER1000 core is compromised with Thermal-hydraulic analysis code (COBRA-EN). By thermal hydraulic parameters averaging Fuel Assembly-to-Fuel Assembly method, the one sixth (symmetry) of the Boushehr Nuclear Power Plant (BNPP) core with regular subchannels are modeled. Comparison between the results of the work and COBRA-EN demonstrates some advantages of the presented code. Using the code the thermal modeling of the fuel rods with considering the fission gas generation would be possible. In addition, this code is compatible with neutronic codes for coupling. This method is faster and more accurate for symmetrical simulation of the core with acceptable results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.4
• /
• pp.25-34
• /
• 2004

UMTS network, evolved from GSM, includes packet core network that consists of SGSNS and GGSNs. Service providers should consider subscriber mobility, location registration, and subscriber distribution when designing packet core networks and network elements. Since one of the major traffic sources for IMT-2000 will be data which has bursty characteristics, new design guidelines for dimensioning of SGSN and GGSN should be proposed under various constraints of system parameters. In this paper, we first evaluate the performance of signaling traffic for packet call subscribers. After that, we also obtain the impact of bursty data traffic on the SGSN and GGSN by simulation, and suggest new dimensioning guidelines for packet core network of UMTS under various environments.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.187-197
• /
• 2013

PURPOSE. The purpose of this study was to evaluate various core designs on stress distribution within zirconia crowns. MATERIALS AND METHODS. Three-dimensional finite element models, representing mandibular molars, comprising a prepared tooth, cement layer, zirconia core, and veneer porcelain were designed by computer software. The shoulder (1 mm in width) variations in core were incremental increases of 1 mm, 2 mm and 3 mm in proximal and lingual height, and buccal height respectively. To simulate masticatory force, loads of 280 N were applied from three directions (vertical, at a $45^{\circ}$ angle, and horizontal). To simulate maximum bite force, a load of 700 N was applied vertically to the crowns. Maximum principal stress (MPS) was determined for each model, loading condition, and position. RESULTS. In the maximum bite force simulation test, the MPSs on all crowns observed around the shoulder region and loading points. The compressive stresses were located in the shoulder region of the veneer-zirconia interface and at the occlusal region. In the test simulating masticatory force, the MPS was concentrated around the loading points, and the compressive stresses were located at the 3 mm height lingual shoulder region, when the load was applied horizontally. MPS increased in the shoulder region as the shoulder height increased. CONCLUSION. This study suggested that reinforced shoulder play an essential role in the success of the zirconia restoration, and veneer fracture due to occlusal loading can be prevented by proper core design, such as shoulder.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.251-253
• /
• 2019

This paper describes an implementation of a security SoC (System-on-Chip) prototype that interfaces a microprocessor with a block cipher crypto-core. The Cortex-M0 was used as a microprocessor, and a crypto-core implemented by integrating ARIA and AES into a single hardware was used as an intellectual property (IP). The integrated ARIA-AES crypto-core supports five modes of operation including ECB, CBC, CFB, CTR and OFB, and two master key sizes of 128-bit and 256-bit. The integrated ARIA-AES crypto-core was interfaced to work with the AHB-light bus protocol of Cortex-M0, and the crypto-core IP was expected to operate at clock frequencies up to 50 MHz. The security SoC prototype was verified by BFM simulation, and then hardware-software co-verification was carried out with FPGA implementation.

• Journal of the Korea Society for Simulation
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2007

Virtual manufacturing (VM) is a powerful technology for developing a new product, new equipment and new manufacturing system, and three-dimensional (3D) simulation is a core technology in VM. 3D simulation involves both mechanical simulation and discrete event simulation. This paper introduces a case study of implementing 3D simulation for developing an automatic assembly line in a Korean optical factory. This factory produces a lens module that is the part of a phone-camera. 3D simulation technology is applied from the early stage of development. In the conceptual design and the initial design phases for individual equipment, 3D mechanical simulation using $CATIA^{(R)}$ and $IGRIP^{(R)}$ is conducted. 3D discrete event simulation with $QUEST^{(R)}$ is applied to the detailed design of the equipment and of the whole system. The focus of the simulation is to verify the technical and economical feasibility of the new automatic system. As a result, the takt time is reduced to the quarter of the manual system, and the number of workers in a line is reduced tremendously.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.1-11
• /
• 2018

Discrete event system specification (DEVS) has been used in many simulations including hybrid systems featuring both discrete and continuous behavior that require a lot of time to get results. Therefore, in this study, we proposed the acceleration of a DEVS-based hybrid system simulation using multi-cores and GPUs tightly coupled computing. We analyzed the proposed heterogeneous computing of the simulation in terms of the configuration of the target device, changing simulation parameters, and power consumption for efficient simulation. The result revealed that the proposed architecture offers an advantage for high-performance simulation in terms of execution time, although more power consumption is required. With these results, we discovered that our approach is applicable in hybrid system simulation, and we demonstrated the possibility of optimized hardware distribution in terms of power consumption versus execution time via experiments in the proposed architecture.