• 전기의세계
• /
• 제29권4호
• /
• pp.247-255
• /
• 1980

In this study, an application of Finite Element Method which, in principle, based on variational calculus has been presented for the two-dimensional analysis of magnetic flux distribution in the shell type core of single phase transformer. The necessary stationarity condition of energy functional and boundary conditions were determined under the assumptions that the electromagnetic field considered is stationary and that the effect of eddy current is negligible. In the process of application the domain of magnetic field was divided into triangle subsectional elements and then the matrix equations were constructed for the respective triangular element and for those of all after the manipulation of minimization process to the vector potential of magnetic field at the each vertex of the element. Furthermore the numerical computation for the equations was guided by the Gaussian Elimination Methods. As the results obtained, it is found that the aspect of magnetic flux distribution inside the core as well as the leakage flux profile at the vicinity of the inner leg of the core is not much different from the well-known distribution profile of magnetic flux, however, the procedure shows to possess the merit of the uniquely deterministic nature for the flux distribution at the desired points.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.781-789
• /
• 2018

This paper proposes a new approach utilizing empirical mode decomposition (EMD) reconstruction to process vibration signals of a transformer under DC bias caused by high voltage direction transmission (HVDC), which is the potential cause of additional vibration and noise from transformer. Firstly, the Calculation Method is presented and a 3D model of transformer is simulated to analyze transformer deformation characteristic and the result indicate the main vibration is produced along axial direction of three core limbs. Vibration test system has been built and test points on the core and shell of transformer have been measured. Then, the signal reconstruction method for transformer vibration based on EMD is proposed. Through the EMD decomposition, the corrupted noise can be selectively reconstructed by the certain frequency IMFs and better vibration signals of transformer have been obtained. After EMD reconstruction, the vibrations are compared between transformer in normal work and with DC bias. When DC bias occurs, odd harmonics, vibration of core and shell, behave as a nonlinear increase and the even harmonics keep unchanged with DC current. Experiment results are provided to collaborate our theoretical analysis and to illustrate the effectiveness of the proposed EMD method.

• KIEAE Journal
• /
• 제9권5호
• /
• pp.77-84
• /
• 2009

This study was initiated by the fact that Kangwon Land and large sized resorts was failed the financial benefit to the local residents. This research analyzed the best important tourist resource among the main tourist resource by perception interviewing local residents and related professionals. This study shows that the leisure resource was most important resource field in Jeong-Seon. So more attention to the leisure resources and investment them. Among natural attraction resources 'Hwa-Ahm cave and Hwa-Ahm mineral water' is estimated to have most potential for the strategic financial support. In leisure sector 'High One resort' is judged to be more important attraction resource by professionals but a case of local residents 'Dong-gang Rafting' and 'Rail Bike' were estimated more important resources rather than 'High One resort;. Lastly, in cultural resources, although the importance is a bit behind natural attraction and leisure resources, 'Jeong-Seon 5th day market' and 'Araree village' should be the core linking other related cultural resources. In order to activate tour industry and development of Jeong-Seon area, it is necessary to find identify of regional owned attraction resources and to build tourist attraction infra structure by selecting core bases of existing major attraction points and linking other various resources to those core bases.

• 설비공학논문집
• /
• 제18권10호
• /
• pp.819-825
• /
• 2006

In a SOFC/GT (solid oxide fuel cell/gas turbine) hybrid power generation system, the recuperator is an indispensible component to enhance system performance. Since the expansion ratio to the recuperator core is very large, generally, the effective header design to distribute the flow uniformly before entering the core is crucial to guarantee the required performance. In the present study, we focus on the design of a diffuser type recuperator header with a 90 degree turn inlet port. To reduce the flow separation and recirculation flows, multiple horizontal vanes are used. The number of horizontal vanes is varied from 0 to 24. The air flow velocity is measured at 40 points just behind the core outlet by using a hot wire anemometer. Then, the flow non-uniformity is evaluated from the measured flow velocity. The experimental results showed that inlet air velocity did not effect on relative flow non-uniformity. According to increasing the number of horizontal vanes, flow non-uniformity reduced about $40{\sim}50%$ than without using horizontal vanes.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1017-1023
• /
• 2019

The increase of the alternate current frequency results in increased rotational speed of the electrical motors and connected pumps. The consequence for the reactor coolant pumps is increased flow in primary coolant system. Increase of the current frequency can be initiated by the subsynchronous resonance phenomenon (SSR). This paper analyses the implications of the SSR and consequential increase of the frequency on the nuclear power plant safety. The Simulink $MATLAB^{(R)}$ model of the steam turbine and governor system and RELAP5 computer code of the pressurized water reactor are used in the analysis. The SSR results in fast increase of reactor coolant pumps speed and flow in the primary coolant system. The turbine trip value is reached in short time following SSR. The increase of flow of reactor coolant pumps results in increase of heat removal from reactor core. This results in positive reactivity insertion with reactor power increase of 0.5% before reactor trip is initiated by the turbine trip. The main parameters of the plant did not exceed the values of reactor trip set points. The pressure drop over reactor core is small discarding the possibility of core barrel lift.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.457-466
• /
• 2003

In this paper, the numerical finite element formulations were derived for the linearized Navier-Stokes' equations with assumptions of two-dimensional incompressible, homogeneous viscous fluid field, and small oscillation and the FAMD (Fluid Added Mass and Damping) code was developed for practical applications calculating the fluid added mass and damping. In formulations, a fluid domain is discretized with C$\^$0/-type quadratic quadrilateral elements containing eight nodes using a mixed interpolation method, i.e., the interpolation function for the velocity variable is approximated by a quadratic function based on all eight nodal points and the interpolation function for the pressure variable is approximated by a linear function based on the four nodal points at vertices. Using the developed code, the various characteristics of the fluid added mass and damping are investigated for the concentric cylindrical shell and the actual hexagon arrays of the liquid metal reactor cores.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.272-277
• /
• 2005

We introduce a new approach to optimize the parameters in biological kinetic models by quantifier elimination (QE), in combination with numerical simulation methods. The optimization method was applied to a model for the inhibition kinetics of HIV proteinase with ten parameters and nine variables, and attained the goodness of fit to 300 points of observed data with the same magnitude as that obtained by the previous optimization methods, remarkably by using only one or two points of data. Furthermore, the utilization of QE demonstrated the feasibility of the present method for elucidating the behavior of the parameters in the analyzed model. The present symbolic-numeric method is therefore a powerful approach to reveal the fundamental mechanisms of kinetic models, in addition to being a computational engine.

• 응용통계연구
• /
• 제26권4호
• /
• pp.569-579
• /
• 2013

단일 분자에서 발생한 발광의 세기 변화를 분석하는 문제는 단분자 분광학에서 반드시 필요하다. 본 연구에서는 카드뮴셀레나이드/황화아연의 중심-껍질 구조를 갖는 양자점에 대한 단분자 분광학 데이터에 대해 Poisson count data로서 베이지안 접근으로 모수에 대한 공액 감마분포와 변화점 개수에 대한 절단포아송 분포로 사전분포를 주고 다중변화점을 추정하였다.

• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.271-276
• /
• 2001

A geometric kernel is the library of core mathematical functions that defines and stores 3D shapes in response to users'commands. We developed a light geometric kernel suitable to develop CAD/CAM application systems. The kernel contains geometric objects, such as points, curves and surfaces and a minimal set of functions for each type but does not contain lots of modeling and handling functions that are useful to create and maintain complex shapes from an idea sketch. The kernel was developed on MS-Windows NT using C++ with STL(Standard Template Library) but it is compatible with UNIX environments. This paper describes the structure of the kernel including several components: base, math, point sequence curve, geometry, translators. The base kernel gives portability to applications and the math kernel contains basic arithmetic and their classes, such as vector and matrix. The geometry kernel contains points, parametric curves, and parametric surfaces. A neutral fie format and programming and document styles are also presented in this paper.

• 한국게임학회 논문지
• /
• 제7권4호
• /
• pp.117-123
• /
• 2007

본 논문은 컴퓨터 바둑에서 돌의 영향력(Stone Influence)과 영향력점(Influence Point) 그리고 영향력 영역(Influence Area)을 제안한다. 돌의 영향력은 놓인 돌과 빈 정점사이의 거리에 따라 정의하며, 영향력점은 돌의 영향력에 대해 임계치를 이용하여 정의한다. 형세평가를 위한 요소로 영향력 영역을 영향력점 덩어리와 코어를 이용하여 정의한다. 저자는 정석 자료를 이용한 실험을 통해서 영향력점의 임계치를 구하였으며, 영향력 영역이 바둑 게임에서 세력으로 성공적으로 적용 가능하였습니다.