• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.167-170
• /
• 2003

In this paper, a design and experiment of PCI Express Core verification Model is described. The model targeting Endpoint core verification is designed by using newly-emerging SystemC which is a system design language based on a new C++ class library and simulation engine. In the verification model, we developed a SystemC Host System model which act as a Root Complex and Device Driver dedicated to the PCI Express Endpoint RTL Core. The test of Host System Model is guided by scenarios which implements and acts point of Device Driver and Root Complex and shows the result of simulation. Also, We present the full structure of verification model and Host model.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2438-2446
• /
• 2023

To cool down a nuclear reactor core and prevent the fuel damage without a pump-driven active component during any anticipated accident, the passive emergency core cooling system (PECCS) was designed and adopted in an advanced light water reactor, i-POWER. In this study, for a validation of the cooling capability of PECCS, thermal-hydraulic integral effect tests were performed with the ATLAS facility by simulating intermediate and small break loss-of-coolant accidents (IBLOCA and SBLOCA). The test result showed that PECCS could effectively depressurize the reactor coolant system by supplying the safety injection water from the safety injection tanks (SITs). The result pointed out that the safety injection from IRWST should have been activated earlier to inhibit the excessive core heat-up. The sequence of the PECCS injection and the major thermal hydraulic transient during the SBLOCA transient was similar to the result of the IBLOCA test with the equivalent PECCS condition. The test data can be used to evaluate the capability of thermal hydraulic safety analysis codes in predicting IBLOCA and SBLOCA transients under an operation of passive safety system.

• 전기전자학회논문지
• /
• 제17권4호
• /
• pp.564-569
• /
• 2013

현재 임베디드 기기는 멀티코어로 급성장하고 있으며 빠른 부팅 속도를 요구하고 있다. 하지만 기존의 부팅 기술은 하나의 코어만을 사용하고 있다. 따라서 본 논문에서는 분석 도구를 통해 안드로이드 부트 프로세스를 분석후, CPU연산이 많은 곳에 병렬 기법을 적용하는 방법과 멀티 코어의 성능을 최대로 끌어내기 위해 CPU주파수 정책을 변경함으로써 멀티코어 기반에서 안드로이드 부팅 속도 향상 방법에 대해 제안한다. 본 논문의 제안 방법을 듀얼 코어 S5PV310과 쿼드 코어 Exynos4412에 각각 적용시킨 뒤 부팅 완료 시간을 측정하였으며 기존의 방법과 제안 방법의 시간을 비교한 결과 듀얼코어와 쿼드코어에서 각각 약 20.71%, 약 31.34%의 속도 성능향상을 가져왔다.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.275-279
• /
• 2016

Additive manufacturing or 3D printing is a new manufacturing process and its application is getting growth. However, the product qualities such as mechanical strength, dimensional accuracy, and surface quality are low compared with conventional manufacturing process such as molding and machining. In this study not only mechanical characteristics of polymer sandwich panel having three dimensional core layer but also mechanical characteristics of core layer itself were analyzed. The shape of three dimensional core layer was pyramidal kagome structure. This core layer was fabricated by two different methods, injection molding with PP resin and material jetting type 3D printing with acrylic photo curable resin. The material for face sheets in the polymer sandwich panel was PP. Maximum load, stiffness, and elongation at break were examined for core layers fabricated by two different methods and also assembled polymer sandwich panels. 3D printed core showed brittle behavior, but the brittleness decreased in polymer sandwich panel containing 3D printed core. The availability of 3D printed article for the three dimensional core layer of polymer sandwich panel was verified.

• 에너지공학
• /
• 제24권2호
• /
• pp.154-166
• /
• 2015

The in-core instrumentation measures core power distribution and coolant temperature in local regions of the core in pressurized water reactors. The installation types are distinguished by the designs of routing paths that exit either through reactor bottom mounted instrument nozzles or through reactor top mounted instrument nozzles. Although each type has unique advantages, it is generally known that top mounted design is more competitive with respect to emphasizing nuclear safety issues and ability to cope with severe accidents. The international nuclear vendors have provided various types of reactors with top mounted design. Nuclear power reactors in Korea, however, only have been designed to be applicable to the use of bottom mounted design, and it has been pointed out that the capabilities of Korean reactors against severe accidents should be further enhanced. The paper deals with technical issues on reactor internal and external design, in-core instrumentation, support assembly, sealing mechanism with nozzles, handling, and analytical issues in order to establish the ways of development.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.937-946
• /
• 2020

The aim in the present work is to simulate accident scenarios of AP1000 during the small-break loss-of-coolant accident (SBLOCA) and investigate the performance and behavior of automatic depressurization system (ADS) during accidents by using MIDAC (The Module In-vessel Degradation severe accident Analysis Code). Four types of accidents with different hypothetical conditions were analyzed in this study. The impact on the thermal-hydraulic of the reactor coolant system (RCS), the passive core cooling system and core degradation was researched by comparing these types. The results show that the RCS depressurization becomes faster, the core makeup tanks (CMT) and accumulators (ACC) are activated earlier and the effect of gravity water injection is more obvious along with more ADS valves open. The open of the only ADS1-3 can't stop the core degradation on the basis of the first type of the accident. The open of ADS1-3 has a great impact on the injection time of ACC and CMT. The core can remain intact for a long time and the core degradation can be prevent by the open of ADS-4. The all results are significant and meaningful to understand the performance and behavior of the ADS during the typical SBLOCA.

• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.273-282
• /
• 2015

In this study, shaking table test has been carried out for the dual frame passive control system for seismic performance verification of the proposed system. The proposed system was separated into two independent frameworks that are strength resistant core and frame structure by connecting to the damper. Moreover, the seismic performance improvement of the proposed system has been verified by comparing and analyzing the experimental results of the proposed system with an existing core system. As a result of the shaking table test, acceleration and displacement responses of dual-frame vibration control system are decreased than those of the existing strength resistant type core system. In the case of the core system, while the damage was concentrated on the column of first floor, the damage of the dual system was dispersed in each layer. The damage also was concentrated on the damper, almost no damage occurs to the structural members. It has been emphasized that installed dampers in the proposed dual system reduce the input energy of whole structure by absorbing seismic input energy, which leads overall system damage to be reduced.

• Journal of Information Technology Applications and Management
• /
• 제27권2호
• /
• pp.23-36
• /
• 2020

The promulgation of the overall framework of Chinese students' development of core literacy has made the implementation of core literacy into specific teaching activities an urgent problem to be solved in the field of education. Based on the analysis of the problems existing in the undergraduate education under the mode of emphasizing theory and neglecting practice, this paper constructs the practical teaching system of Database Principle Course Based on the core quality, expounds the implementation strategy of practical teaching, and probes into how to train the students in the practical teaching of database principle Cultivate scientific spirit, learning ability, practical innovation, responsibility and other core literacy. After 5 rounds of practice, students have achieved better development in independent development and collaborative work, and their awareness of practical innovation has been significantly improved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.285-288
• /
• 2004

In this paper, we present a design and experiment of PCI Express core verification model. The model targeting Endpoint core based on Verilog HDL is designed by newly-emerging SystemC, which is a new C++ class library based system design approach. In the verification model, we designed and implemented a SystemC host system model which acted as Root Complex and device driver dedicated to the PCI Express Endpoint RTL core. The verification process is scheduled by scenarios which are implemented in host model. We show that the model is useful especially for verifying the RTL model which has dependencies on system software.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.419-424
• /
• 2002

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality In February, 1995. Many experiments should be safely performed to activate the utilization of the HANARO. A flow simulation facility is being developed for the endurance test of reactivity control units for extended life times and the verification of structural integrity of those experimental facilities prior to loading in the HANARO. This test facility is composed of three major parts; a half-core structure assembly, flow circulation system and support system. The flow circulation system is composed of a circulation pump, a core flow pipe, a core bypass flow pipe and instruments. The system is to be filled with de-mineralized water and the flow should be met the design flow to simulate similar flow characteristics in the core channel of the half-core test facility to the HANARO. This paper, therefore, describes an analytical analysis to study the flow behavior of the system. The computational flow analysis has been performed for the verification of system pressure variation through the three-dimensional analysis program with standard k-$\epsilon$ turbulence model and for the verification of the structural piping integrity through the finite element method. The results of the analysis are satisfied the design requirements and structural piping integrity of flow circulation system.