• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.3
• /
• pp.182-191
• /
• 2012

This paper proposes a high performance QoS (Quality of Service) traffic transmission scheme to provide real-time multimedia services in wireless networks. This scheme is based on both a traffic estimation of the mean rate and a header compression method by dividing this network model into two parts, core RTP/UDP/IP network and wireless access parts, using the IEEE 802.11 WLAN. The improvement achieved by the scheme means that it can be designed to include a means of provisioning the high performance QoS strategy according to the requirements of each particular traffic flow by adapting the header compression for real-time multimedia data. A performance evaluation was carried out to show the effectiveness of the proposed traffic transmission scheme.

• ETRI Journal
• /
• v.24 no.1
• /
• pp.43-55
• /
• 2002

This paper proposes a flow-based admission control algorithm through an Asynchronous Transfer Mode (ATM) based Multi-Protocol Label Switching (MPLS) network for multiple service class environments of Integrated Service (IntServ) and Differentiated Service (DiffServ). We propose the Integrated Packet Scheduler to accommodate IntServ and Best Effort traffic through the DiffServ-aware MPLS core network. The numerical results of the proposed algorithm achieve reliable delay-bounded Quality of Service (QoS) performance and reduce the blocking probability of high priority service in the DiffServ model. We show the performance behaviors of IntServ traffic negotiated by end users when their packets are delivered through the DiffServ-aware MPLS core network. We also show that ATM shortcut connections are well tuned with guaranteed QoS service. We validate the proposed method by numerical analysis of its performance in such areas as throughput, end-to-end delay and path utilization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.126-126
• /
• 2012

In past decades, the themal inkjet (TIJ) printer has been widely used as one of the most well-known digital printing technology due to its low cost, and high printing quality. Since the printing speed of TIJ printers are much slower than that of laser printers, however, there has been intensive efforts to raise the printing speed of TIJ printers. One of the most plausible methods to raise the printing speed of TIJ printers is to adopt a page-wide array TIJ printhead. To accomplish this goal, the high efficiency inkjet heating resistor films should be developed to settle the high power consumption problem of a page-wide array TIJ printhead. In this study, we investigated noble metal based multicomponent thin film resistor films prepared by atomic layer deposition (ALD) for a high efficiency inkjet printhead. Design concept, preparation, material properties of noble metal based multicomponent thin films will be discussed in terms of mutlfunctionality.

• The Journal of Society for e-Business Studies
• /
• v.7 no.3
• /
• pp.105-120
• /
• 2002

The importance of contents industry is growing up in various industries because of internet and digital economy. Recently, contents industry is challenging to new businesses such as total service industry with digital contents. It is important to classify digital contents to use it in contents industries and information and telecommunication service industries. Previous contents classification frameworks is based on contents quality, business model and application methods. They didn't consider business processes, interfaces of business unit and interactions in contents industries. In this paper, we present core business processes in digital contents industries, a corresponding digital contents classification, and analysis method of digital contents industry.

• Journal of Information Processing Systems
• /
• v.12 no.1
• /
• pp.83-99
• /
• 2016

The latest research on the image-based fingerprint matching approaches indicates that they are less complex than the minutiae-based approaches when it comes to dealing with low quality images. Most of the approaches in the literature are not robust to fingerprint rotation and translation. In this paper, we develop a robust fingerprint matching system by extracting the circular region of interest (ROI) of a radius of 50 pixels centered at the core point. Maximizing their orientation correlation aligns two fingerprints that are to be matched. The modified Euclidean distance computed between the extracted orientation features of the sample and query images is used for matching. Extensive experiments were conducted over four benchmark fingerprint datasets of FVC2002 and two other proprietary databases of RFVC 2002 and the AITDB. The experimental results show the superiority of our proposed method over the well-known image-based approaches in the literature.

• 한국석유지질학회:학술대회논문집
• /
• spring
• /
• pp.10-14
• /
• 1998

A systematic methodology is developed for the electrofacies determination from wireline log data using multivariate statistical analysis. To consider corresponding contribution of each log and reduce the computational dimension, multivariate logs are transformed into a single variable through principal components analysis. Resultant principal components logs are segmented using the statistical zonation method to enhance the efficiency and quality of the interpreted results. Hierarchical cluster analysis is then used to group the segments into electrofacies. Optimal number of groups is determined on the basis of the ratio of within-group variance to total variance and core data. This technique is applied to the wells in the Korea Continental Shelf. The results of field application demonstrate that the prediction of lithology based on the electrofacies classification matches well to the core and the cutting data with high reliability This methodology for electrofacies classification can be used to define the reservoir characteristics which are helpful to the reservoir management.

• Journal of the Korean Professional Engineers Association
• /
• v.19 no.2
• /
• pp.34-42
• /
• 1986

These brief studies and reports of the use of exposed aggrigate precast concrete in practice are combined with a description of some notable co-ordination such as shop drawing, manufacturing and erection in the field construction. Above mentioned exposed aggrigate P. C. means architectural P. C. which was used to the VOTRAKON site in Riyadh, Saudi Arabia. Fabricated P. C. on the site without autoclaving and steam curing plant had been successfully carried out on this project-core building, conference room and others. The project designed by HOPE/VTN international INC. which is located in San Diego, California U.S.A. stands for vocational training and related support facilities contract. We had to submit shop drawings showing complete information for fabrication and installation of P. C. unit reinforcement. Also we should be indicated member dimension and cross section, location size and type of necessary for erection. We can delineate the following characteristic results. One of the most important things how to handle exposed aggrigate P.C. unit as specified was quality assurance and co-ordination for shop drawing, manufacturing and erection.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.344-347
• /
• 2014

This study was carried out on DLC thin film deposition technology used in infrared optical system production as a method of reducing the shape changes of the molding core and the consequent loss of life. Experiments on the deposition on silicon wafer and tungsten carbide used as a substrate for molding core were conducted at each processing condition using a filtered arc system, and it was found that the surface and mechanical properties were of the greatest quality when the substrate bias voltage of -150 V was used. In addition, it was confirmed that the PV and Ra characteristics were improved by the deposition of the DLC thin film.

• Journal of Korea Technology Innovation Society
• /
• v.8 no.spc1
• /
• pp.323-336
• /
• 2005

Digital content industry is growing rapidly because of the property of high-speed networking and greater demand for digital fulltext-image. However, we know the fact that it is many difficulty in production and supply for good quality of content. Hereupon, we suggest digital fulltext-image service framework to protect copyright. More concretely, we propose integrated model and reference model to securely serve digital fulltext-image by recompositing core objects and reconstructing the value-chain structure of digital content industry to framework including the process(from its production (creators or copyrighters) to consumption (users or consumers)). Also, we construct the digital fulltext- image service system based on reference model and reconstruct its interface that occurs between core subjects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.12-18
• /
• 2009

In this paper, for reducing the assembly torque of subminiature plastic barrel and base which are the essential parts of mobile phone camera module, the high-precision system for inspecting the screw shape of core, electrode and injection molding products was developed. For realization of inspection process, the inspection parameters for evaluating the manufacturing quality were selected and the measurement methods of selected parameters were developed. Finally, the inspection system which is possible to be applied to the field were fabricated.