• 대한물리의학회지
• /
• 제11권2호
• /
• pp.1-11
• /
• 2016

PURPOSE: This study was conducted to assess the effects of local vibration on ankle plantarflexion spasticity and clonus in patients with spinal cord injury. METHODS: The subjects were 14 inpatients with complete or incomplete spinal cord injury (SCI) whose scores were higher than 1 on the Modified Ashworth Scale (MAS) and Spinal Cord Assessment Tool for Spastic Reflexes (SCATS) scale of paraplegia. A randomized single-blind cross-over design was used. Vibration treatment involved a single application of vibration for 10 min in the sitting position, and placebo treatment involved the patient remaining in the sitting position for 10 min. One day after treatment, vibration and placebo treatments were crossed over. Spasticity was measured by using the MAS, and resistance force, by using a hand-held dynamometer; clonus was gauged by using the SCATS scale and clonus burst duration. Additionally, the burst maximal frequency and voluntary ankle dorsiflexion angle of the triceps surae were measured. RESULTS: The application of vibration treatment in the sitting position significantly reduced the MAS scores and resistance force, but significantly increased the dorsiflexion angle of the ankle joint (p<0.05). Furthermore, the vibration treatment diminished the clonus burst duration and SCATS score significantly (p<0.05). Although it reduced the burst maximal frequency of the lateral gastrocnemius and medial soleus, this was significant only for the lateral gastrocnemius. The placebo treatment did not significantly affect any of the test parameters. CONCLUSION: Vibration treatment in the sitting position was effective in cases of spasticity and clonus caused by SCI.

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.425-431
• /
• 2019

본 연구자는 척주 측만증 및 허리뼈 분쇄 골절된 환자의 수술 후 단순 엑스선 척주 측방향 촬영에서 두개의 철심이 겹친 영상을 얻어내기 위해 엑스선관 및 인체팬톰의 각도를 변화시켜 영상을 얻었다. 영상 평가를 위해 대학병원 영상의학과에서 10년 이상 근무한 방사선사 5명에게 주관적 평가를 하였다. 측정 결과 척주 측만증 측방향 촬영은 정중 이마면을 IR면 중심에 일치되게 하고 일곱 번째 등뼈가 중앙이 되도록 자세를 조정한 후 엑스선관과 척주팬톰 자세를 각각 수직으로 촬영하면 척주 측방향 촬영에서 두 개의 겹쳐진 영상을 얻을 수 있었고 주관적 평가에서도 높은 점수를 얻었다. 또한 허리뼈 탈구 골절된 허리뼈 측방향 촬영은 이마면을 IR면 중심에 일치시키고 네번째 허리뼈가 중앙이 되도록 자세를 조정하여 엑스선관 각도를 수직되게 하고 척주 팬톰을 네번째 허리뼈를 수직하여 촬영 하게 되면 척주 측방향 촬영에서 두개의 철심이 겹치는 영상을 얻을 수 있었고 주관적 평가에서도 높은 점수를 얻었다.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.125-134
• /
• 2003

In this study, Mooney-Rivlin 1st model and Mooney-Rivlin 3rd model are adopted as strain energy density functions of the rubber compounds of a radial tire. It is shown that the FE analysis using Mooney-Rivlin models for rubber compounds may provide good approximations by employing the appropriate strain range of experimental stress-strain data in a way to describe the stress-strain relationship accurately. Especially, Mooney-Rivlin 3rd model gives an accurate stress-strain relationship regardless of the fitting strain range used within the strain of 100%. The static nonlinear FE analysis of a tire inflation is performed by employing an axisymmetric model, which shows that the outside shapes of the tire before and after inflating the tire agree well with those of the real tire. Additionally, the deformations at crown center and turning point on sidewall, distribution of belt cord force, interlaminar shear strain are predicted in terms of variation of belt cord angle which is known as the most influential factor in inflation behavior of a tire.

• 한국방사선학회논문지
• /
• 제16권7호
• /
• pp.919-925
• /
• 2022

본 연구는 경추 CT 검사 후에 영상을 재구성하는 방법으로, 사위 관상면(oblique coronal) 재구성 각도에 따라서 신경공 골성 협착을 가장 잘 표현할 수 있는 재구성 각도를 제시하고자 한다. 경추의 정중시상면과 구추관절에서 척수 중심을 지나는 선을 그어 만들어지는 각도를 측정하였다. 신경공에서 척수 중심을 지나는 선을 그어, 정중시상면과 이루는 각도를 측정하여 비교하였다. 경추 4-5 레벨에서는 평균 9.2°, 경추 5-6 레벨에서는 평균 9.9°, 경추 6-7 레벨에서는 평균 8.4° 로 구추관절각보다 돌기사이관절각이 크게 측정되었으며, 통계적으로 평균에 유의한 차이가 있었다(p<0.01). 또한, 하부 경추로 갈수록 각도가 증가하는 것을 알수 있었다. 하부 경추(C5-6, C6-7)의 신경공과 척수 중심이 이루는 각은 55~60° 사이이며, 여기에 90°가 되도록 사위 관상면 영상을 재구성하면 신경공협착 정도가 잘 관찰된다. 기존 CT 스캔 영상을 이용한 재구성 영상이므로 추가적인 방사선 피폭을 받지 않으면서, 경추 신경공 골성 협착을 진단하는데 큰 의의가 있다.

• 대한방사선치료학회지
• /
• 제26권1호
• /
• pp.21-28
• /
• 2014

목 적 : 비소세포 폐암의 치료용적의 크기가 크거나 폐 용적이 작고, 몸의 정중선(Mid line)에 위치한 경우 척수의 허용선량을 고려한 방사선치료계획에서 폐 선량이 많아지게 되는데, 본 연구는 비소세포 폐암 환자의 3차원입체조형치료(Three dimensional conformal radiotherapy, 3D CRT), 제한된 각도를 이용한 세기변조방사선치료(Intensity modulated radiotherapy, IMRT)와 용적변조회전치료(Volumetric Modulated Arc therapy, VMAT) 치료계획을 각각 적용하여 전체 폐 선량을 비교 및 평가하고자 한다. 대상 및 방법 : TrueBeam STx($Varian^{TM}$, USA) 10 MV 에너지를 이용하여 4명의 환자에 대하여 3D CRT, 제한된 각도를 이용한 IMRT와 VMAT 치료계획을 세우고, 총 선량 66 Gy/30 Fx 처방하였을 때, 선량용적히스토그램(Dose Volume Histogram, DVH)을 이용하여 치료계획용적(Planning Target Volume, PTV), 전체 폐 그리고 척수에 들어가는 선량을 평가하였다. PTV에 대한 처방선량지수(Conformity Index, CI), 선량균질지수(Homogeneity index, HI), 처방선량포함지수(Paddick's Conformity Index, PCI)를 구하고, 폐의 30 Gy 용적($V_{30}$), $V_{20}$, $V_{10}$, $V_5$, 평균선량(Mean dose)을 평가하고, 척수의 최대선량 값을 평가하였다. 결 과 : PTV에 대한 CI, HI, PCI의 평균값은 각각 $0.944{\pm}0.009$, $1.106{\pm}0.027$, $1.084{\pm}0.016$으로 평가되었다. 전체 폐에 대한 첫 번째 환자의 $V_{20}$은 3D CRT, IMRT, VMAT 각각 30.7%, 20.2%. 21.2%, 두 번째 환자의 $V_{20}$은 33.0%, 29.2%. 31.5%, 세 번째 환자의 $V_{20}$은 51.3%, 34.3%. 36.9%, 네 번째 환자의 $V_{20}$은 56.9%, 33.7%. 40%로 제한된 각도를 이용한 IMRT 치료계획에서 가장 낮게 평가되었다. 척수에 대한 최대선량 값은 모두 허용선량 미만으로 평가되었다. 결 론 : 비소세포 폐암의 방사선치료계획에서 3D CRT와 비교했을 때, 제한된 각도를 이용한 IMRT나 VAMT을 이용하면 척수의 허용선량을 넘지 않으면서 폐 선량을 줄여줄 수 있는 치료계획을 세울 수 있었다. IMRT와 VAMT을 비교해보면 PTV의 선량포함과 척수선량을 고려했을 때 IMRT 치료계획에서 보다 좁은 각도를 이용한 치료계획이 가능하였고, 이는 폐 선량을 좀 더 줄여줄 수 있는 결과를 얻을 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.57.2-57.2
• /
• 2011

In this study, the effects of shear flows around a 2-dimensional airfoil, S809 on its aerodynamic characteristics were analyzed by CFD simulations. Various parameters including reference inflow velocity, shear rate, angle of attack, and cord length of the airfoil were examined. From the simulation results, several important characteristics were found. Shear rate in a flow makes some changes in the lift coefficient depending on its sign and magnitude but angle of attack does not have a distinguishable influence. Cord length and reference inflow also cause proportional and inversely proportional changes in lift coefficient, respectively. We adopted an analytic expression for the lift coefficient from the thin airfoil theory and proposed a modified form applicable to the traditional load analysis procedure based on the blade element momentum theory. Some preliminary results applied to an well known load simulation software, FAST, are presented.

• Journal of Korean Neurosurgical Society
• /
• 제56권2호
• /
• pp.114-120
• /
• 2014

Objective : At present, gold-standard technique of cervical cord decompression is surgical decompression and fusion. But, many complications related cervical fusion have been reported. We adopted an extended anterior cervical foraminotomy (EACF) technique to decompress the anterolateral portion of cervical cord and report clinical results and effectiveness of this procedure. Methods : Fifty-three patients were operated consecutively using EACF from 2008 to 2013. All of them were operated by a single surgeon via the unilateral approach. Twenty-two patients who exhibited radicular and/or myelopathic symptoms were enrolled in this study. All of them showed cervical cord compression in their preoperative magnetic resonance scan images. Results : In surgical outcomes, 14 patients (64%) were classified as excellent and six (27%), as good. The mean difference of cervical cord anterior-posterior diameter after surgery was 0.92 mm (p<0.01) and transverse area was $9.77mm^2$ (p<0.01). The dynamic radiological study showed that the average post-operative translation (retrolisthesis) was 0.36 mm and the disc height loss at the operated level was 0.81 mm. The change in the Cobb angle decreased to 3.46, and showed slight kyphosis. The average vertebral body resection rate was 11.47%. No procedure-related complications occurred. Only one patient who had two-level decompression needed anterior fusion at one level as a secondary surgery due to postoperative instability. Conclusions : Cervical cord decompression was successfully performed using EACF technique. This procedure will be an alternative surgical option for treating cord compressing lesions. Long-term follow-up and a further study in larger series will be needed.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.725-731
• /
• 2007

An air spring which is a part of the suspension system of automobiles is used to reduce and absorb the vibration and the noise. Main components of the air spring are a cord reinforced rubber bellows, a canister and a piston. The performance of the air spring are depended on configurations of rubber bellows, the angle and elastic modulus of cord. The finite element analysis are executed to predict and evaluate the load capacity and the stiffness. The design variables of air spring are determined to adjust the required specifications of the air spring. Several samples of the air spring are manufactured and experimented. It is shown that the results by finite element analysis are in close agreement with the test results.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2012년도 춘계 종합학술대회 논문집
• /
• pp.173-174
• /
• 2012

To determine whether position affects measured lung capacity of spinal cord injury patients. The study subjects were 45 patients with spinal cord injury (cervical level 15, thoracic level 15, lumbar level 15). Subjects were provided with a full explanation of the experimental procedures and all provided written consent signifying their voluntary participation. We used a spirometer (Spirometer, Micromedical Ltd, UK) to measure pulmonary function in the supine and sitting positions (straightened upper body at an angle of $90^{\circ}$). Forced vital capacity (FVC), forced expiratory volume during the first second (FEV1), tidal volume (TV), and maximum insufflation capacity (MIC) were also measured. FVC, FEV1, TV, MIC (%) were greater in the supine than in the sitting position for those with injury at the cervical or thoracic injury level. On the other hand, FVC, FEV1, TV, MIC (%) were lower in the supine position for those with an injury at the lumbar level. More attention should be paid to the effect of injury level on measured lung capacity.

• 한국전문물리치료학회지
• /
• 제24권2호
• /
• pp.1-8
• /
• 2017

Background: Individuals with spinal cord injury (SCI) rely on their upper limbs for body-lifting activity (BLA). While studies have examined the electromyography (EMG) and kinematics of the shoulder joints during BLA, no studies have considered foot position during BLA. Objects: This study compared the effects of different foot positions during BLA on the shoulder muscle activities, peak plantar pressure, knee flexion angle, and rating perceived exertion in individuals with SCI. Methods: The study enrolled 13 mens with motor-complete paraplegic SCI, ASIA (American Spinal Injury Association) A or B. All subjects performed BLA with the feet positioned on the wheelchair footrest and on the floor independently. Surface EMG was used to collect data from the latissimus dorsi, pectoralis major, serratus anterior, and triceps brachii. The peak plantar pressure was measured using pedar-X and the knee flexion angle with Image J. Borg's rating perceived exertion scale was used to measure the physical activity intensity level. The paired t-test was used to compare the shoulder muscle activities, peak plantar pressure, knee flexion angle, and rating perceived exertion between the two feet positions during BLA. Results: The activity of the latissimus dorsi, pectoralis major, serratus anterior, and triceps brachii and rating perceived exertion decreased significantly and the peak plantar pressure and knee flexion angle increased significantly when performing BLA with the feet positioned on the wheelchair footrest compared with on the floor (p<.05). Conclusion: These findings suggest that individuals with SCI may perform BLA with the feet positioned on the wheelchair footrest for weight-relief lifting to decrease the shoulder muscle activities and the rating perceived exertion and to increase the peak plantar pressure and the knee flexion angle.