• Resources Recycling
• /
• v.20 no.6
• /
• pp.63-70
• /
• 2011

Enviromental friendly leaching process for the recovery of cobalt and copper from the cobalt concentrate was investigated by organic acids as a leaching reagent. The experimental parameters, such as organic acid type, concentrations of leachant, time and temperature of the reaction as well as the solid to liquid ratio were tested to obtain the optinum conditions for the leaching of cobalt and copper. The results showed that citric acid was the most effective leaching reagent among the organic acids used in this experiment. About 99% of cobalt, 95% of copper and 70% of nickel was dissolved by 2.0 M of citric acid. Addition of 3.0 vol.% of hydrogen perioxide was effective to enhance the leaching efficiency and the optinum temperature was found to be about $70^{\circ}C$.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.4
• /
• pp.9-15
• /
• 2015

Black cobalt solar selective coatings were prepared by using an electroplating method. The changes in the optical properties of the black cobalt selective coating due to thermal degradation were analyzed by using the Auger electron spectroscopy (AES) and spectrophotometer. The black cobalt selective coating was prepared on a copper substrate by using a synthesized electrolyte with $CoCl_2$ and KSCN at a current density of ${\sim}0.5A/dm^2$ for 45s ~ 60s. Its optical properties were a solar absorptance (${\alpha}$) of the order of 0.80 ~ 0.84 and a thermal emittance (${\epsilon}$) of 0.01. From the AES depth profile analysis of heated sample, thermal degradation of the black cobalt selective coating heated for 33 hours at temperature of $350^{\circ}C$ occurred primarily due to interdiffusion at interface of cobalt and copper substrate. This results were predictable that the ${\alpha}$ decreases due to the thermal oxidation and diffusion.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.48-56
• /
• 2011

Black cobalt solar selective coatings were prepared by thermal oxidation of electroplated cobalt metal on copper and nickel substrates. The optical properties and structure of the black cobalt selective coating for solar energy utilizations were characterized by glow discharge spectrometry (GDS), ultraviolet-visible-near infrared (UV-VIS-NIR) spectrometer, atom force microscopy(AFM) and X-ray photoelectron spectroscopy(XPS). The optical properties of optimum black cobalt selective coating prepared on copper substrate were a solar absorptance of 0.82 and a thermal emittance of 0.01. From the GDS depth profile analysis of these coatings, the concentration of cobalt particles near the interface was higher than at the surface, but oxygen concentration at the surface was higher than at the interface. These results suggest that the selective absorption was dominated by this chemical composition variation in the coating. The surface of this film exhibited morphology with root-mean-square(rms) roughness of about 144.3nm. XPS measurements data showed that several phases of Co coexist($Co_3O_4$,CoO) in the film.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.2
• /
• pp.103-106
• /
• 1990

A balance study was conducted to determine the requirements of iron, copper, cobalt and manganese in crossbred calves. Six calves were fed milk average 10 percent of their body weight and were supplemented with 15 g mineral mixture daily. A balance trial was conducted at $2\frac{1}{2}$ months of age. The primary route of excretion was through digestive tract as 99.87, 80.99, 77.27 and 99.94 percent of Fe, Cu, Co and Mn were excreted through faeces. The requirements of Fe, Cu, Co and Mn were computed using the respective mineral balance data and were found to be 169.60, 7.20, 4.48 and 8.89 mg/kg respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.564-566
• /
• 2001

A study was undertaken to record the utilization of some micro-elements during inflammation of the mammary gland. Two groups of twenty five animals each suffering from subclinical and clinical mastitis were selected for the study. All the animals were maintained on identical diets. Blood zinc level in cows with subclinical mastitis ($5.66{\pm}0.52$) was significantly (p<0.05) lower than that of healthy cows ($8.46{\pm}1.10ppm$). No significant difference was, however, recorded in blood copper and cobalt levels between healthy and mastitic cows.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.48-54
• /
• 2013

The methods to separate and remove copper in the mixed solution ((399 ppm Cu, 208 ppm Fe, 15.3 g/L Ni, 2.1 g/L Co) with nickel, cobalt and iron were investigated. With hydroxide precipitation method, copper and iron ions were completely precipitated and removed from the solution at pH 7 while some nickel and cobalt also were precipitated. 99.75% copper could be precipitated and removed as copper sulfide from the solution with adding $Na_2S$ (1.25 w/v concentration) of 2 times equivalent of Cu at pH 1. Copper was selectively absorbed on TP 207 ion exchange resin at equilibrium pH 2.0 and could be eluted from copper-loaded resin using 5% $H_2SO_4$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3227-3232
• /
• 2013

A novel Cu-Co-O composite nanocatalyst was designed and prepared for the ozonation of phenol. A synergistic effect of copper and cobalt was observed over the Cu-Co-O composite nanocatalyst, which showed higher activity than either copper or cobalt oxide alone. In addition, the Cu-Co-O composite revealed good activity in a wide initial pH range (4.11-8.05) of water. The fine dispersion of cobalt on the surface of copper oxide boosted the interaction between catalyst and ozone, and the surface Lewis acid sites on the Cu-Co-O composite were determined as the active sites. The Raman spectroscopy also proved that the Cu-Co-O composite was quite sensitive to the ozone. The trivalent cobalt in the Cu-Co-O composite was proposed as the valid state.

• The Korean Journal of Ecology
• /
• v.23 no.1
• /
• pp.59-64
• /
• 2000

Heavy metal concentrations in surface sediments, seawater and oysters (Crassostrea gigas) were determined to assess heavy metal contamination in the Jinhae Bay. The ranges of cadmium, cobalt, copper, nickel, lead and zinc concentration in surface sediments were 0.1∼2.4, 12.6∼14.4, 25.3∼ 92.3, 32.4∼ 93.5, 24. 1∼81.2, 124∼477 ㎍/g, respectively. The concentrations of cadmium, copper, lead and zinc which were influenced by industrial activity were the highest in the inside of Masan Bay. Dissolved concentrations of cadmium, cobalt, copper, nickel, lead and zinc in seawater were <0.010∼0.043, 0.008∼0.120, 0.31∼0.90, 0.25∼3.10, 0.010∼0.142, 0.27∼9.04 ㎍/L, respectively. The concentrations of cadmium, cobalt, copper, nickel, lead and zinc in seawater were also the highest inside of Masan Bay, suggesting that Masan Bay is the major source of heavy metal input to the Jinhae Bay. Bioconcentration factors (BCF) of zinc, copper, cadmium, lead, cobalt and nickel in C. gigas were 647373, 280861, 145069, 44559, 13524, 2745, respectively, showing C gigas is a stronger accumulator than other bivalves.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.709-719
• /
• 1992

We synthesized the binuclear tetradentate Schiff base cobalt(II), nickel(II) and copper(II) complexes such as [Co(II)_2(TSBP)(L)_4], [Ni(II)_2(TSBP)(II)_4] and [Cu(II)_2(TSBP)] (TSBP: 3,3',4,4'-tetra(salicylideneimino)-1,1'-biphenyl, L: Py, DMSO and DMF). We identified the binucleated structure of these complexes by elemental analysis, IR-spectrum, UV-visible spectrum, T.G.A. and D.S.C. According to the results for cyclic voltammogram and differential pulse polarogram of 1 mM complexes in nonaqueous solvents included 0.1M TEAP-L (L; Py, DMSO and DMF) as supporting electrolyte, it was found that diffusionally controlled redox processes of four steps through with one electron for binucleated Schiff base Cobalt(II) complex was Co(III)_2 {^\longrightarrow \\_\longleftarrow^e^-}Co(III)Co(II)_2{^\longrightarrow \\_\longleftarrow^e^-}Co(II){^\longrightarrow \\_\longleftarrow^e^-}Co(I){^\longrightarrow \\_\longleftarrow^e^-}Co(I)_2 and two steps with one electron for Nickel(II) and Copper(II) complexes were M(II)_2 {^\longrightarrow \\_\longleftarrow^e^-}M(I)M(I){^\longrightarrow \\_\longleftarrow^e^-}M(I)_2 (M; Ni and Cu) in nonaqueous solvents.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.3-17
• /
• 2012

Selective leaching processes for copper, gold, nickel, and cobalt have been investigated because there is an advantage of ammoniacal hydrometallurgy that metal such as copper could be selectively extracted restricting the dissolution of iron or calcium. In the present article, the studies for selective ammoniacal leaching of copper from motor scraps and waste printed circuit boards (PCBs), for ammoniacal leaching of gold to decrease the amount of cyanide used or to substitute cyanide by thiosulfate, and for ammoniacal leaching to recover nickel and cobalt from nickel oxide ore and intermidiate obtained from manganese nodule treatment process were summarized and further studies were proposed for domestic technology development for ammoniacal hydrometallurgy processes.