• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.263-268
• /
• 2000

Recently, the recycling of the by-products was attempted to various fields. One of the major industry, the copper manufacturing industry produced a lot slags. in this study, the copper smelting slag was used to use practically application for the aggregate of concrete. To find the optimum mixing ratio of mortar with the copper smelting slag as substitution for sand, the mixing ratio was increased 1:2 to 1:5 step by step and every mixture was contained 5 steps sand substitutive ratio. The substitutive ratio of sand was increased 25% st대 by step from 0% to 100%. The result of this study was shown as follows. 1. In the every mixture, as the substitutive ratio was increased, the flow was decrease 3.64% from 18cm, and the unit content weigth was increased 5.5% in average. 2. The property of the strength was judged that it was more affected W/C and mixing ratio than the copper smelting slag.

• Current Photovoltaic Research
• /
• 제3권2호
• /
• pp.61-64
• /
• 2015

In solar industry, numerous researchers reported about cold spray method among various electrode formation technic, but there are no known a bonding mechanism of metal powder. In this study, a cross-section of copper electrode formed by cold spray method was observed and heterogeneous phase between silicon substrate and copper electrode was analyzed using morphology observation technic. SEM and TEM analysis were performed to analyze a crystallinity and distribution shape of heterogeneous copper phase. Molecular dynamics simulation was performed to calculate glass transition temperature of copper metal. In the result, amorphous copper phase was observed near interface between silicon substrate and metal electrode. The results of the molecular dynamics simulation show that an amorphous copper phase could be formed at a temperature below the melting point of copper because cold spraying resulted in a lower glass transition temperature.

• Journal of Nutrition and Health
• /
• 제29권5호
• /
• pp.528-532
• /
• 1996

The purpose of this study was to analyse copper intake and effect ofZn(30mg ZnSO4/d) supplementation on plasma copper level of Korean adults. Daily Cu intakes were studied in ninety subjects aging 20-20 years. Among them twenty four subjects participated in 6 weeks Zn supplementation study. The men consumed 1.47($\pm$0.64)mg of Cu and the women consumed 0.98($\pm$0.43)mg of Cu daily. the most abundant sources of Cu was meat, fish, egg and soybean group, the second was cereal and grain group and the third was vegetable group. These three groups supplied about 90% of copper in the subjects. The plasma copper level of the subjects was not changed much until two weeks of Zn supplementation. However, after two weeks of Zn supplementation plasma copper level was reduced continuously during the experiment. There was no significant difference in plasma Cu level between control and supplement group of the men, while the supplemented women showed significantly lower plasma Cu level than control group at week 4(p<0.01) and week 6(p<0.05). Although plasma Cu level of the subjects was slightly changed, its concentration in plasma was still in normal range in all groups and no one showed clinical Cu deficiency. Therefore the Zn supplementation of RDA level doesn't seem to cause any adverse effect on Cu status.

• 생태와환경
• /
• 제55권3호
• /
• pp.251-257
• /
• 2022

Monitoring and assessing aquatic ecosystems using the behavior of organisms is essential for sustainable ecosystem management. Oligochaetes, which inhabit various freshwater ecosystems, are frequently used to evaluate the environmental conditions of freshwater ecosystems. Tubifex tubifex (Müller, 1774) (Oligochaeta, Tubificidae) is tolerant to organic pollution and has been used to evaluate the toxicity of toxicants, including heavy metals. We studied the behavioral responses of T. tubifex to three different copper concentrations (0.1, 0.5, and 1.0 mg L^-1). The specimens were exposed to copper in an observation cage containing 150 mL of dechlorinated water. Movement behavior (diameter, speed, acceleration, meander, and turning rate) was continuously observed for two hours before and after the copper treatments. After the treatments, the diameter shrank and showed rapid twisting movement under all the copper conditions. The turning rate had a positive correlation with meander and acceleration both before and after treatment at all three concentrations, whereas speed and meander had a negative correlation. Length and turning rate also showed a negative correlation. The correlation coefficient between speed and acceleration in the highest copper concentration changed from positive before treatment (r=0.64) to negative (r= -0.52) after treatment. Our results present the possibility of using behavioral parameters to detect copper contamination in freshwater ecosystems.

• 헤리티지:역사와 과학
• /
• 제53권2호
• /
• pp.64-87
• /
• 2020

중국의 돈황 막고굴 벽화 등 서북지방에서 처음 사용된 copper trihydroxychloride(아타카마이트, 파라타카마이트, 보탈라카이트 등)는 고대부터 동록, 녹염, 염록으로 알려져 왔으며, 중국에서는 석록과 함께 중요 녹색 안료로 사용되어 왔다. 처음에는 천연 광물인 녹염동광이 사용되었지만 5대 이후에는 합성 copper trihydroxychloride가 주로 사용되었다. 중국 문헌에는 동록, 녹염, 염록은 구리 분말, 광명염(염화나트륨), 요사(염화암모늄)을 반응시켜 만드는 것으로 기록되어 있으며, 이렇게 제조된 물질은 copper trihydroxychloride로 분석되었다. 한국에서는 고려시대까지의 회화에서는 발견되지 않았지만, 조선시대 회화(초상화, 산수화, 기록화, 장식화, 불화, 무속화 등)와 건축물 단청의 녹색 안료 분석에서 석록과 함께 중요 녹색 안료로써 사용되었음이 밝혀졌다. 특히 불화, 무속화, 단청, 기타 채색 유물에서는 석록보다 사용 빈도가 높았다. 조선시대에서 사용된 copper trihydroxychloride 안료는 일부 회화의 녹색 안료 분석에서 합성 copper trihydroxychloride가 확인되었지만, 나머지 회화 등의 분석에서는 합성 안료인지 천연 안료인지는 불명확하였다. 문헌과 유물 분석을 통해 조선에서 사용된 copper trihydroxychloride의 안료명은 진한 녹색인 하엽으로 판단되며, 옅은 녹색의 삼록과 함께 주로 사용되었다. 하엽은 조선초(15세기) 중국에서 배워와 처음으로 제조되어 19세기 말까지 계속 제조되었으며, 중국으로부터 수입품도 사용된 것으로 보인다. 중국의 채색 유물의 합성 copper trihydroxychloride 안료와 조선의 합성 copper trihydroxychloride의 입자 특성(어두운 코어를 가진 원형 또는 타원형 입자)이 비슷하였다. 따라서 한국과 중국의 합성 copper trihydroxychloride 안료는 유사한 방법으로 제조된 것으로 추정된다.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2006년도 제23차 정기총회 및 학술발표회
• /
• pp.64-65
• /
• 2006

The effects of garlic extracts, lactic acid bacteria, copper and selenium as cholesterol lowering material on productivity and content of egg cholesterol in layer were investigated. The layers were divided into seven treatment groups and fed commercial diet or experimental diets containing probiotics, garlic powder, selenium and copper for 6 weeks. There was no significant difference in egg production between groups. The content of egg yolk cholesterol by combination feeding of probiotics, garlic powder, selenium and copper were significantly reduced by 13.5-29.8% as compared to that of control. The levels of mRNA expression of HMG-CoA reductase were significantly decreased by dietary treatments.

• Journal of Electrochemical Science and Technology
• /
• 제11권1호
• /
• pp.60-67
• /
• 2020

In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl₂ from NaClO₃ type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo₃·nCu(OH)₂], first reaction product, CuCo₃ is produced more than Cu(OH)₂ when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)₂ was produced more than CuCO₃. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

• 미생물학회지
• /
• 제44권3호
• /
• pp.169-177
• /
• 2008

대표적인 방사선저항성 미생물인 Deinococcus radiodurans의 구리이온($CuCl_2,250{\mu}M$)에 대한 발현체 분석을 DNA microarray를 이용하여 수행하였다. 총 3,187개의 open reading frame중 70개의 유전자 발현이 2배 이상증가(64개) 또는 감소(6개)하였다. 이들 중 흥미롭게도 철이온 흡수 관련 유전자들로 추정되는 두 개 operon ($DRB0014{\sim}DRB0017$과 $DRB0121{\sim}DRB0125$)의 발현이 가장 높게 증가하였다. 두 operon의 첫 번째 유전자인 DRB0014와DRB0125의 발현을 실시간 정략 PCR을 이용하여 분석한 결과, 두 유전자 모두 구리 이온($CuCl_2,250{\mu}M$) 또는 철이온 킬레이트화합물(2,2'-dipyridyl, $ 250{\mu}M$)을 첨가하였을 경우 발현이 10배 이상 증가하였으나 철이온($FeCl_3,250{\mu}M$) 또는 구리 이온 킬레이트화합물(bathocuproine disulphonate, $250{\mu}M$)이 존재할 때에는 발현이 변화하지 않았다. 따라서 D. radiodurans의 구리 대사는 철 흡수 시스템과 관련이 있는 것으로 추정된다. 그러나 DRB0014와DRB0125의 변이는D. radiodurans의 구리 저항성 및 방사선 저항성에 큰 영향을 미치지 않는 것으로 관찰되었다.

• 한국군사과학기술학회지
• /
• 제19권6호
• /
• pp.712-720
• /
• 2016

The purpose of this study was to inspect ballistic match of copper bullet at 4 points by analyzing vertical deviation about shot group of the 5.56 mm common bullets and copper bullets. The 5.56 mm bullet with new copper core material was developed for mitigation of environmental pollution and harmfulness to human body. The results of this study are as follows; using the regression analysis, estimated reference value of ballistic match were 51.6 mm, 64.9 mm, 87.3 mm and 99.6 mm at 25 m, 100 m, 200 m and 250 m range respectively. When analyzing the shooting test data, alternative hypothesis(The vertical deviations are less than the reference value) was adopted as the result of analyzing data using t-test. And the values of data through tool(PRODAS) and standard trajectory equation meet requirements of estimated ballistic match respectively. In conclusion, the level of ballistic match of 5.56 mm copper bullets meets the estimated reference level through regression analysis at 4 points.

• 복식문화연구
• /
• 제31권1호
• /
• pp.107-123
• /
• 2023

This research studied the electrical characteristics, IR transmission characteristics, stealth functions, and thermal characteristics of infrared thermal-imaging cameras of copper-sputtered samples. Nylon samples were prepared for each density as a base material for copper-sputtering treatment. Copper-sputtered NFi, NM1, NM2, NM3, NM4, and NM5, showed electrical resistance of 0.8, 445.7, 80.7, 29.7, 0.3, and 2.2 Ω, respectively, all of which are very low values; for the mesh sample, the lower the density, the lower the electrical resistance. Measuring the IR transmittance showed that the infrared transmittance of the copper-sputtered samples was significantly reduced compared to the untreated sample. Compared to the untreated samples, the transmittance went from 92.0-64.1%. When copper sputtered surface was directed to the IR irradiator, the IR transmittance went from 73.5 to 43.8%. As the density of the sample increased, the transmittance tended to decreased. After the infrared thermal imaging, the absolute values of △R, △G, and △B of the copper phase increased from 2 to 167, 98 to 192, and 7 to 118, respectively, and the closer the density of the sample (NM5→NFi), the larger the absolute value. This proves that the dense copper phase-up sample has a stealth effect on the infrared thermal imaging camera. It is believed that the copper-sputtered nylon samples produced in this study have applications in multifunctional uniforms, bio-signal detection sensors, stage costumes, etc.