• 자원환경지질
• /
• 제16권1호
• /
• pp.1-10
• /
• 1983

The Yeonhwa (I, II) and Keodo mines, neighboring in the middle part of the Taebaegsan mineral belt, contain three distinct classes of skarn deposits: the zinc-lead skarn at Yeonhwa (I, II), the iron skarn at Keodo south (Jangsan orebodies), and the copper skarn at Keodo north (78 orebodies). The present study characterizes the three classes of skarn deposits mainly in terms of skarn/ore associations examined from chemical compositional point of view, and applies existing quantitative phase diagrams to some pertinent mineral assemblages in these mines. At Yeonhwa I the Wolam I orebody shows a vertical variation in skarn minerals ranging from clinopyroxene/garnet zone on the lower levels through clinopyroxene (without garnet) zone on the intermediate levels, and finally to rhodochrosite veins on the upper levels and surface. Ore minerals, sphalerite and galena, associate most closely with the intermediate clinopyroxene zone. At Keodo, the Jangsan iron skarn hosted in quartz monzodiolite as a typical endoskarn, shows a skarn zoning, from center of orebody to outer side, magnetite zone, magnetite/garnet zone, garnet clinopyroxene zone, and clinopyroxene/epidote/plagioclase zone. The 78 copper skarn in the Hwajeol limestone indicates a zoning, from quartz porphyry side toward limestone side, orthoclase/epidote zone, epidote/clinopyroxene zone, and clinopyroxene/garnet zone; chalcopyrite and other copper sulfides tend to be in clinopyroxene/garnet zone. Mioroprobe analyses of clinopyroxenes and garnets from the various skarn zones mentioned above revealed that the Yeonhwa zinc/lead skarns are characterized by johansenitic clinopyroxene (Hd 25-78, Jo 15-23) and manganoan andraditic garnet (Ad 13-97, Sp 1-24), whereas the Jangsan iron skarn at Keodo by Mn-poor diopsidic clinopyroxene (Di 78-93, Jo 0.2-1.0) and Mn-poor grossularitic grandite (Gr 65-77, Sp 0.5-1.0). The 78 copper skarn at Keodo is characterized by Mn-poor diopsidic-salite (Di 66-91, Jo 0.2-1.1) and Mn-poor andraditic grandite(Ad 40-74, Sp 0.5-1.1). The compositional charateristics of iron, copper, and zinc-lead skarns in the Yeonhwa-Keodo mines are in good correlations with those of the foreign counterparts. Compiling a $T-XCO_2$ phase diagram for the Jangsan endoskarns, a potential upper limit of temperature of the main stage of skarn formation is estimated to be about $530^{\circ}C$, and a lower limit to be $400^{\circ}C$ or below assuming $XCO_2=0.05$ at P total=1kb. Applying a published log $fS_2$-log $fo_2$ diagram to the Keodo 78 and Yeonhwa exoskarns, it is revealed that copper sulfides and zinc-lead sulfides do not co-exist stably below log $fS_2=-4$ and log $fO_2=-23$ at $T=400^{\circ}C$ and ${\times}CO=1$ atm.

• 미생물학회지
• /
• 제11권4호
• /
• pp.189-195
• /
• 1973

With the gradual expansion of copper demands, the utilization of enormous tonnages of waste copper mineral containig up to 0.5% copper becomes available. In order to investigate the possibilities on the application of bacterial leaching method to waste dumps or abandoned mines, the authors had carried out microbial leaching of copper minerals by F.ferrooxidans isolated from the Dalsung copper mine water. The results obtained were as follows : 1. The copper extraction rate from the Dalsung chalcopyrite has been a little accerelated by using flasks in place of percolators. 2. The percentage of copper extracted from the Dalsung chalcopyrite sample was 100% in 30 days in the presence of iron-oxidizing bacteria F.ferrooxidans while 9.27% in the absence of bacteria. 3. F.ferroxidans was capable of producing sufficient quantities of ferric sulfate and sulfuric acid from ferrous iron to bring about the dissolution of 100% of copper from the Dalsung chalcopyrite.

• 한국산업보건학회지
• /
• 제1권1호
• /
• pp.82-88
• /
• 1991

Determination of Cu, Fe, Ni, Pb, and Zn concentrations in coal and respirable coal dust were performed by atomic absorption spectrophotometry. The coal samples of 18 coal mines in Gangneung area were collected and 25 coal mines in Taebaek area. Crushed coal samples were divided into three mesh sizes. The results were as follows : 1. Metal concentrations of coals in Gangneung area by sieve sizes( -100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 20, 18, 19, Fe ; 1,830, 1,765, 1,107, Pb ; 6, 8, 14, Ni ; 17, 17, 14, Zn ; 4, 2, $4{\mu}g/g$, respectively. Metal concentrations in coals in Taebaek area by sieve sizes(-100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 30, 32, 26, Fe ; 1,741, 1,822, 1,773, Pb ; 8, 9, 7, Ni ; 13, 13, 13, Zn ; 8, 5, $4{\mu}g/g$, respectively. There were not significant differences of Cu, Fe, Ni, Pb, and Zn concentrations of coals statistically in Gangneung and Taebaek area by sieve size. 2. Metal concentrations of coals in Gangneung and Taeback area were as follows : Cu ; 19, 30, Fe ; 1,514, 1,778, Pb ; 9, 8, Ni ; 16, 13, Zn ; 3, $6{\mu}g/g$, respectively. Differences of copper and zinc concentrations of coal samples were significant between Gangneung and Taebaek area, but those of iron, nickel and lead concentrations were not significant. 3. Copper, iron, lead, nickel and zinc concentrations of coals and respirable coal dust were as follows : Cu ; 30, 6, Fe ; 1,779, 5,075, Pb ; 8, 7,814, Ni ; 13, 5,681, Zn ; 5, $134{\mu}g/g$, respectively. Differences of nickel, lead and zinc concentrations were significant between coals and respirable coal dust but those of copper and iron concentrations were not significant.

• 터널과지하공간
• /
• 제25권6호
• /
• pp.496-504
• /
• 2015

로드헤더는 커팅헤드에 픽커터를 설치하여 지반을 굴착하는 장비이다. 픽커터는 일반적으로 코니컬타입을 사용하며, 코니컬 픽커터는 선단부에 마모에 강한 텅스텐카바이드 팁을 사용하여 커터의 소모를 감소시키는 굴착 도구이다. 본 연구에서는 구리광산의 망토와 역암으로 구성된 복합지반을 대상으로 로드헤더 커팅헤드에 3종류의 코니컬 픽커터를 사용하여 내구성능을 살펴보았다. 현장적용 후, 픽커터의 육안조사와 중량감소율 측정, 그리고 CT 및 SEM을 이용한 내 외부 균열조사를 수행한 결과, 하드페이싱으로 보강한 코니컬 픽커터의 내구성능이 가장 우수하였으며, 각 코니컬 픽커터의 내 외부에서는 현장적용 전과 후 모두에서 매크로 크랙 및 미세균열을 발견할 수 없었다.

• 한국식품위생안전성학회지
• /
• 제17권4호
• /
• pp.178-182
• /
• 2002

전국 폐광지역(48곳) 평야지역(8곳) 농산물(280건), 토양(280건), 농경수(48건)를 채취하여 수은 함량은 Mercury analyzer로, 납, 카드뮴, 비소 등 중금속은 습식분해후 ICP, AAS등으로 분석하였다. 본 연구결과, 평야지역에 비해 폐광산지역의 토양에 있어 크롬을 제외한 수은, 납 등 중금속 함량이 더 높았으며 농경수에 있어서는 수은을 제외한 다른 중금속함량이 더 높았다. 폐광산지역의 농산물중 납, 카드뮴 등 중금속 함량은 평야지역에 비해 대체로 높은 편이었으나 구리 함량은 평야지역의 농산물이 다소 높았다. 토양과 농산물중 납 등 중금속함량간의 유의적인 상관관계는 관찰되지 않았다(p>0.05). 앞으로도 식품의 안전성 확보 및 국민건강증진차원에서 폐광산지역의 토양, 농산물중 중금속 함량에 대한 모니터링 사업이 지속적으로 수행되어야 할 것으로 사료된다.

• Steel and Composite Structures
• /
• 제15권2호
• /
• pp.151-162
• /
• 2013

In this study, an electrolyzing device for the production of metal powders was designed and fabricated. The production of copper powders was performed using a variety of current densities, anode-cathode distances and power removal times. The effect of these parameters on powder particle size and shape was determined. Particle size was measured using a laser diffraction unit while the powder shape was determined by SEM. Experimental results show that an increase in current density leads to a decrease in powder particle size. In addition particle shape changed from globular dendritic to acicular dendritic with increasing the current density. Distance between the cathode and anode also showed a similar influence on powder particle size and shape. An increase in time of powder removal led to an increase in powder particle size, as the shape changed from acicular dendritic to globular dendritic.

• Geomechanics and Engineering
• /
• 재33권6호
• /
• pp.567-581
• /
• 2023

The prediction and achievement of a proper rock fragmentation size is the main challenge of blasting operations in surface mines. This is because an optimum size distribution can optimize the overall mine/plant economics. To this end, this study attempts to develop four improved artificial intelligence models to predict rock fragmentation through cascaded forward neural network (CFNN) and radial basis function neural network (RBFNN) models. In this regards, the CFNN was trained by the Levenberg-Marquardt algorithm (LMA) and Conjugate gradient backpropagation (CGP). Further, the RBFNN was optimized by the Dragonfly Algorithm (DA) and teaching-learning-based optimization (TLBO). For developing the models, the database required was collected from the Midouk copper mine, Iran. After modeling, the statistical functions were computed to check the accuracy of the models, and the root mean square errors (RMSEs) of CFNN-LMA, CFNN-CGP, RBFNN-DA, and RBFNN-TLBO were obtained as 1.0656, 1.9698, 2.2235, and 1.6216, respectively. Accordingly, CFNN-LMA, with the lowest RMSE, was determined as the model with the best prediction results among the four examined in this study.

• 자원환경지질
• /
• 제41권3호
• /
• pp.287-297
• /
• 2008

태백산-황강리광화대내 34개 광산의 광석을 대상으로 8개 전략광물자원(Pb, Zn, Cu, Fe, Mo, W Au, U)의 함량을 분석하여 광종별 예비개발타당성을 추정한 결과는 다음과 같다. 동의 경우, 상동광산은 23%의 동(한계품위=0.7%)을 함유하는 것으로 나타났으며, 아연의 경우, 청일광산과 삼황학광산은 평균 5%의 아연(한계품위=2.0%)을 함유하는 것으로 나타났다. 특히, 상기 광산들에 대해서는 추가정밀조사가 요구된다. 또한, 몰리브덴의 경우(한계품위=0.02%), 제2연화(0.04%) 및 홍천광산(0.02%), 연의 경우(한계품위=0.58%), 원가사 광산(0.70%), 금의 경우(한계품위=10ppm), 동명(279ppm)및 삼황학광산(251ppm)에서, 각각 해당광종에 대한 국제가격추이에 맞추어 탄력적으로 재가행 여부에 대한 평가가 요구된다. 반면, 우라늄, 철, 텅스텐의 경우, 본 연구결과 경제적으로 개발할 가치가 있는 광산이 없는 것으로 사료된다.

• 자원리싸이클링
• /
• 제21권1호
• /
• pp.3-16
• /
• 2012

도시광산 재자원화기술의 모듈과 한국의 비철제련 프로세스를 파악하기 위하여 재자원화기술의 전체상과 요소기술, 물리선별, 비철제련 프로세스 및 바람직한 도시광산 처리기술의 단위조작을 밝히고, LS-Nikko동제련(주)과 고려아연(주)의 리싸이클링 프로세스를 탐색하였다. 끝으로 일본의 대표적인 비철제련소인 DOWA Holdings 및 JX Holdings 리싸이클링 프로세스와 한국의 위 두 비철제련소의 리싸이클링 프로세스를 비교검토 하였다.

• 자원환경지질
• /
• 제29권5호
• /
• pp.597-613
• /
• 1996

The tonnage of copper and tungsten produced at Dalseong mine by Taehan Tungsten Mining Company from 1961 to 1971 was 48,704 tons (M/T) of 4 wt.% Cu and 1,620 tons (S/T) of 70wt.% WO, but the mine was closed in 1974. Kyeongsan mine is a small abandoned cobalt mine with no data of production. To investigate the pollution level of the mine areas, soils, plants (Ohwi and Pampanini), stream waters and stream sediments were taken and Fe, Mn, Cu, Pb, Zn, Ni, Co, Cd and Cr were analysed by ICP. Soils are considerably contaminated by the heavy metals related to ore deposits, The heavy metal contents in plants vary with the species and parts of plants. Stream waters are anomalously high in heavy metals in the vicinity of the mines but the contents decrease downstream in the process of dilution and precipiation. However, heavy metal contents increase very high in stream sediments due to precipiation. To protect environmental damages caused by acid mine drainages wetlands must be constructed outside pits, and it is necessary to fill pits with waters, limestone chips and organic materials, which give reducing and alkaline condition to ores. Under the condition pyrite is protected from oxidation and aqueous iron sulphates precipitate to form stable secondary pyrite.