• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.899-906
• /
• 2020

The WSS lateral examination is important for diagnosing spinal disorders. Recently, long-length detectors for large-area diagnose have been popularized to effectively reduce the exposure dose and examination time. It can be applied very efficiently to examinations of patients with high risk of falls, children, and adolescents. However, since the image is acquired through a single irradiation, the volume of cervical vertebra is relatively smaller than the lumbar due to the geometrical anatomy of the spine. Therefore, this study intends to fabricate an additional filter using 3D printing technology and copper filament to obtain uniform image quality in the WSS lateral examination and to analyze the results. 3D printing technology is able to easily print a desired shape, so it is widely used in the entire industrial field, and recently, a copper filament has been developed to confirm the possibility as an additional filter. In the WSS lateral examination, CNR and SNR were excellently measured when the additional filter was applied, confirming the possibility of using the additional filter.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.05a
• /
• pp.158-159
• /
• 2003

Although the sub-chronic toxic effects of metal on fishes are well documented, that is mostly in fishes exposed to waterborne metal but few studied have been conducted on the effects of dietary metal (Handy, 1996). The realization that dietary uptake of metal is a major cause of long-term contamination in wild fish has renewed interest in the nutritional and toxicological effects of metal in the food of fishes (Handy, 1996). (omitted)

• Journal of Ecology and Environment
• /
• v.30 no.3
• /
• pp.257-264
• /
• 2007

Over-expression of a copper/zinc superoxide dismutase (Cu/ZnSOD) resulted in substantially increased tolerance to cadmium exposure in Arabidopsis thaliana. Lower lipid peroxidation and $H_2O_2$ accumulation and the higher activities of $H_2O_2$ scavenging enzymes, including catalase (CAT) and ascorbate peroxidase (APX) in transformants (CuZnSOD-tr) compared to untransformed controls (wt) indicated that oxidative stress was the key factor in cadmium tolerance. Although progressive reductions in the dark-adapted photochemical efficiency (Fv/Fm) and quantum efficiency yield were observed with increasing cadmium levels, the chlorophyll fluorescence parameters were less marked in CuZnSOD-tr than in wi. These observations indicate that oxidative stress in the photosynthetic apparatus is a principal cause of Cd-induced phytotoxicity, and that Cu/ZnSOD plays a critical role in protection against Cd-induced oxidative stress.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1255-1259
• /
• 2005

Lewy bodies (LBs) are neuronal inclusions that are closely related to Parkinson's disease (PD). The filamentous component of LB from patients with PD contains biochemically altered $\alpha$-synuclein. We have investigated the effect of the oxidized products of catecholamines on the modification of $\alpha$-synuclein. When $\alpha$-synuclein was incubated with the oxidized 3,4-dihydroxyphenylalanine (L-DOPA) or dopamine, the protein was induced to be aggregated. The oxidized catecholamine-mediated $\alpha$-synuclein aggregation was enhanced by copper ion. Radical scavengers, azide and N-acetyl cysteine significantly prevented the oxidized catecholamine-mediated $\alpha$-synuclein aggregation. The results suggest that free radical may play a role in $\alpha$-synuclein aggregation. Exposure of $\alpha$-synuclein to the oxidized products of catecholamines led to the formation of dityrosine. Antioxidant dipeptides carnosine, homocarnosine and anserine significantly protected $\alpha$-synuclein from the aggregation induced by the oxidized products of catecholamines.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.527-531
• /
• 2016

In this study, p-type thin film transistors consisting of CuO channels were fabricated by sol-gel process, with copper (II) acetate monohydrate precursors. At $500^{\circ}C$, the deposited films were fully converted into monoclinic phase CuO. The fabricated CuO thin film transistors deliver field effect mobility in saturation regime of $0.015cm^2/Vs$, and $I_{on}/I_{off}$ of ${\sim}10^3$. The degradation of the performance of the fabricated CuO thin film transistor caused by the exposure to air has been studied.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1634-1641
• /
• 2021

Exposure to gamma-rays is hazardous for humans and other living beings because of their high penetration through the materials. For this reason, shielding materials (usually lead, copper and stainless steel) are used to protect against gamma rays. This study's objective was to prepare ceramic materials for gamma radiation shielding by using different natural bentonite clays. Gamma-ray attenuation performances of the prepared shielding materials at different thicknesses were investigated and evaluated for different gamma-ray energies from different standard point gamma radiation sources (²⁵¹Am, ⁵⁷Co, ¹³⁷Cs, ⁶⁰Co, and ⁸⁸Y). The mass and linear attenuation coefficients of the prepared ceramics vary between 0.238 and 0.443 cm² g^-1 and between 0.479 and 1.06 cm^-1, respectively, depending on their thicknesses. Results showed that these materials could be prioritized because of their evidential properties of gamma radiation protection in radiation applications.

• Journal of agricultural medicine and community health
• /
• v.42 no.1
• /
• pp.13-23
• /
• 2017

Objectives: This study was conducted to evaluate a relationship between the blood concentrations of toxic metals and the blood pressure in people living near the copper smelter. Methods: The study included 570 adults living within 4km of the smelter. We compared systolic and diastolic blood pressure between tertiary groups for blood cadmium, mercury and lead levels, respectively. Multiple regression analysis was performed to identify risk factors affecting systolic and diastolic blood pressures. Results: In male subjects, there is a significant difference in the mean of systolic and diastolic blood pressure between tertiary groups of blood cadmium and mercury levels, but in women, there was no significant difference in the mean systolic and diastolic blood pressures in all tertiary groups of heavy metals. The results of multiple regression analysis showed that age, BMI, and cadmium concentration in men were risk factors for blood pressure. In women, age and BMI, drinking and smoking, and blood mercury were significantly influenced to blood pressure. Conclusions: Residents living near the Janghang smelter showed high concentrations of blood lead and cadmium, suggesting that they were exposed to high concentrations of heavy metals released from the smelter in the past. Such exposure may have caused some blood pressure increase. Especially, the concentration of cadmium in the case of men and the concentration of mercury in blood in the case of women were found to be significantly related to the increase of blood pressure. The local population should be advised to make efforts to reduce exposure to environmental contaminants, in order to minimize cardiovascular disease, and to pay close attention to any health problems possibly related to toxic metal exposure.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.838-843
• /
• 2015

In this study, a cotton knit was dyed with elm bark extract; subsequently, the dyed fabric was measured according to the types of mordants and the preprocessing cationizers used. Additionally, antibiosis against super bacteria was examined. The results follow. First, the color of the dyed cotton knit appeared reddish and yellowish for fabrics treated with non-mordants and mordants. When preprocessing with a cationizer was conducted, the dyeing properties were the best. Second. even when mordants were not used for dyeing, color fastness after washing, sweating, and rubbing was generally good Grade 4 and 5. Color fastness after exposure to sunlight was the best Grade 4 for fabric prepared with ferrous sulfate as the mordant. Third. as for antimicrobial properties, or resistance to super bacteria, the growth of bacteria was suppressed in a meaningful way for fabrics treated with non-mordants and mordants, compared to the control group fabric. The dyeing methods with the most powerful antimicrobial effects were dyeing after preprocessing with a cationizer and preparing fabric with copper sulfate as the mordant. The results stated above show that in case of dyeing with elm bark extract, preprocessing of the cotton knit with a cationizer and dying with copper mordant displayed high levels of antimicrobial properties that were useful for resisting super bacteria. Of these the dyeing properties were the best when preprocessing with a cationizer.

• Journal of Conservation Science
• /
• v.34 no.4
• /
• pp.245-257
• /
• 2018

To investigate the deterioration of textiles with metal thread, I surveyed 40 textile objects, dating from the 11th to the 19th century from Korea, China, Japan, and Central Asia at the Metropolitan Museum of Art, New York. This survey included various types, widths, and thicknesses of metal thread. In addition, deterioration was examined under the microscope and color information was collected using the spectrophotometer. While investigating metal thread in the collections, I fabricated 12 different types of metal samples with metal leaf(24K gold, silver, and copper leaf), adhesive (hide animal glue and a mixture of hide animal glue and iron oxide red), and paper substrate(Korean mulberry and Taiwanese kozo paper). The accelerated deterioration process of those fabricated samples was carried out using a light box(UV and daylight), and a humidity cabinet. In the light experiment with blue scales textile fading card(aka, blue wool standard), the metal leaf began to peel off during the deterioration process with 756,000 lux-hours UV and daylight. In the temperature and humidity experiment, I could observe the reddish tarnish on copper, and some part of it began to peel off. Color reading on the light exposed samples showed that the degree of color change on the surface follows the amount of exposure as it increased over time. On the other hand, color change on the samples after artificial deterioration using temperature and humidity factors showed random change of color with occasional spikes. Distortion of original shape worsened in the samples exposed to temperature and humidity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.421-421
• /
• 2008

Generally, the polymer thick-film resistors for embedded organic or hybrid substrate are patterned by screen printing so that the accuracy of resistor pattern is not good and the tolerance of resistance is too high(${\pm}$20~30%). To reform these demerits, a method using Fodel$^{(R)}$ technology, which is the patterning method using a photosensitive resin to be developable by aqueous alkali-solution as a base polymer for thick-film pastes, was recently incorporated for the patterning of thermosetting thick-film resistor paste. Alkali-solution developable photosensitive resin system has a merit that the precise patterns can be obtained by UV exposure and aqueous development, so the essential point is to get the composition similar to PSR(photo solder resist) used for PCB process. In present research, we made the photopatternable resistor pastes using 8 kinds of epoxy acrylates and a conductive carbonblack (CDX-7055 Ultra), evaluated their developing performance, and then measured the resistance after final curing. To become developable by alkali-solution, epoxy acrylate oligomers with carboxyl group were prepared. Test coupons were fabricated by patterning copper foil on FR-4 CCL board, plating Ni/Au on the patterned copper electrode, applying the resistor paste on the board, exposing the applied paste to UV through Cr mask with resistor patterns, developing the exposed paste with aqueous alkali-solution (1wt% $Na_2CO_3$), drying the patterned paste at $80^{\circ}C$ oven, and then curing it at $200^{\circ}C$ during 1 hour. As a result, some test compositions couldn't be developed according to the kind of oligomer and, in the developed compositions, the measured resistance showed different results depending on the paste compositions though they had the same amount of carbonblack.