• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.741-742
• /
• 2006

This paper deals with an efficient superconducting joint method between 2G high superconducting(HTS) wire, YBCO coated conductor(CC). Recently CC is one of the most promising superconducting wire due to high n-value and critical current independency from external magnetic field. It is expected to be used many superconducting application such as fault current limiter, persistent current system and cable etc. In most HTS applications, superconducting magnet is used, and it is necessary to joint between superconducting wire to fabricate superconducting magnet system. A CC tape used in this research consists of copper stabilizer, silver layer, YBCO layer, buffer and substrate. Direct joint using soldering method was inefficient due to resistance of copper, then copper lamination is removed by chemical etching method to reduce resistance between CC tapes. Jointed tapes were fabricated and tested. Transport current through jointed area and induced voltage were measured to characterize the I-V curve. Resistance between CC wire using chemical etching was compared with resistance of direct jointed tapes using soldering method in this paper.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.153-162
• /
• 2018

Objective: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. Methods: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi ($27^{\circ}C$) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. Results: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week ${\times}$ diameter ${\times}$ application (p < 0.05). Conclusions: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.505-513
• /
• 1993

To make the electrophotographic photoreceptor that srnsirizes for panchromatic matcrial, the dying element of sunfasr yellow which has an absorption ivavclength at near 400nm, and $\alpha,\beta$-copper phthalocyaninc dying elements with 700nm absorption wavelength were adsorbed and then dispersed onto the zine oxide(Zn0). In ordcr to characterize rhe change In sensitivity the various binders and different mole ratio of ZnO to binder were employed in here. It was found rhat the optimum sensitivity was obtained with 5.5 ratio. I;rom the measurements of electrostatic and spectral sensitivity, it was found that the maximum photographic properties were obtained for mixing the sunfast yellow and $\beta$-copper phthalocyaninr. In this case the electrophotographic sensiri\ity was found to he $E{1:2}$= 1440 lux . sec. And also the spectral sensitivity shows that it had a good properties for panchromatic matcrial.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.152-156
• /
• 2000

The effect of cupric ion concentration on the throwing power has been studied in the electrodeposition of Cu on the porous reticular electrodes with the electrolytes of $CuSO_4\;and\;H_2SO_4$. Sulfuric acid electrolytes with lower concentration of $CuSO_4$ improved throwing power in electrodeposition of copper not only due to higher cathodic polarizability but also due to higher conductivity of the electrolytes. The increase in conductivity of the electrolytes at low concentration of $CuSO_4$ could be also illustrated by the decrease in viscosity of the electrolytes. It was found that both the throwing power and the limiting current density should be taken into account in the electrodeposition of Cu on the reticular electrodes. According to the experimental results, the electrolyte of 0.2M $CuSO_4$ and 0.5M $H_2SO_4$ was found to be the most appropriate condition at the current density of $10mA/cm^2$.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.6
• /
• pp.499-506
• /
• 2004

The copper foil surface inspection system is necessary for the factory automation and product quality. The developed system is composed of the high speed line scan camera, the image capture board and the processing computer. For the system resource utilization and real-time processing, multi-threaded architecture is introduced. There are one image capture thread, 2 or more defect detection threads, and one defect communication thread. To process the high-speed input image data, the I/O overlap is used through the double buffering. The defect is first detected by the predetermined threshold. To cope with the light irregularity, the compensation process is applied. After defect detection, defect type is classified with the defect width, eigenvalue ratio of the defect covariance matrix and gray level of defect. In experiment, for high-speed input image data, real-time processing is possible with multi -threaded architecture, and the 89.4% of the total 141 defects correctly classified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.45-45
• /
• 2007

Capacitors among the embedded passive components are most widely studied because they are the major components in terms of size and number and hard to embed compared with resistors and inductors due to the more complicated structure. To fabricate a capacitor-embedded PCB for in-line process, it is essential to adopt a low temperature process (<$200^{\circ}C$). However, high dielectric materials such as ferroelectrics show a low permittivity and a high dielectric loss when they are processed at low temperatures. To solve these contradicting problems, we studied BMN materials as a candidate for dielectric capacitors. processed at PCB-compatible temperatures. The morphologies of BMN thin films were investigated by AFM and SEM equipment. The electric properties (C-F, I-V) of Pt/BMN/Cu/polymer were evaluated using an impedance analysis (HP 4194A) and semiconductor parameter analyzer (HP4156A). $Bi_2Mg_{2/3}Nb_{4/3}O_7$(BMN) thin films deposited on copper clad laminate substrates by sputtering system as a function of Ar/$O_2$ flow rate at room temperature showed smooth surface morphologies having root mean square roughness of approximately 5.0 nm. 200-nm-thick films deposited at RT exhibit a dielectric constant of 40, a capacitance density of approximately $150\;nF/cm^2$, and breakdown voltage above 6 V. The crystallinity of the BMN thin films was studied by TEM and XRD. BMN thin film capacitors are expected to be promising candidates as embedded capacitors for printed circuit board (PCB).

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.585-597
• /
• 1999

Plutomic rocks of the Mabogsan, located in the southestern part of the Koheung Eup are composed of granite gneiss, diorite, biotite grantie and granophyre. On the basis of Rb-Ba-Sr diagram, the diorires are plotted from granodiorite to quartz diortie, the biotite granites from granodiortie to anomalous granite and the granophyres in normal granite filed. The plutonic rocks tend to show the I-type characteristics in terns of ACF diagram, $K_2O-Na_2O$ diagram and $Al_2O_3/Na_2O+K_2O+CaO$ diafram, while have values of ilmenite series in magnetic subseptibility. The plutons could have formed in the tectonic environment of VAG+COLG+ORG based on the silica vs. trace element diagrams. Gold contents with major and trace elements have been determined for 21 granophyres, 13 biotite granites and 4 diorites are; (1) for the diorite, the rangs is 0.508~1.73 ppb with an average of 0.5ppb;(2) for the biotite granites, the range is 0.449~13.5ppb with an average of 3 ppb;(3)for the granphyres, the range is 0.508~23.1ppb with an average of 4.5ppb. The gold content of the studied plutons tends to increase from mafic to felsic rocks. Gold contents tend to show positive correlations with those of Ag and Zn, negative correlations with those of As, Ba and Rb. The copper contents of the plutons are comparatively high. Average copper contents of diorite, biotite granite and granophyre are 710ppm, 587ppm and 484ppm, respectively. The copper contents of the plutons tend to have good correlations with those of Ag, Bi and Pb.

• Journal of Adhesion and Interface
• /
• v.24 no.3
• /
• pp.105-111
• /
• 2023

Recently, there has been a growing interest in low biofouling coatings for various industrial applications including precious metal and jewelry applications. Contaminations including cells and bacteria of the metallic substrates (i.e., accessories, earring, and piercings) may irritate the contacted tissue surfaces or induce an abnormal reaction. In this study, catechol-conjugated polyethylene glycol (PEG-C) was synthesized as low bio-fouling coating materials inspired by mussel-adhesion. PEG-C-coated copper-zinc alloy surfaces showed excellent cell viability and significant inhibitions of protein and cell adhesions to metal surfaces. Thus, PEG-C coating methods and PEG-C-coated metallic substrates can be usefully exploited for versatile industrial applications, particularly for precious metal and jewelry industries.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4671-4677
• /
• 2023

For the first time Pb, Ni, and Cu nanocomposites were synthesized by versatile solution combustion synthesis using Aloevera extract as a reducing agent, to study the potential applications in X-ray/gamma, neutron, and Bremsstrahlung shielding. The synthesized Lead-Nickel-Copper (LNC) nanocomposites were characterized by PXRD, SEM, UV-VIS, and FTIR for the confirmation of successful synthesis. PXRD analysis confirmed the formation of multiphase LNC NCs and the Scherrer equation and the W-H plot gave the average crystal sizes of 19 nm and 17 nm. Surface morphology using SEM and EDX confirmed the presence of LNC NCs. Strong absorption peaks were analyzed by UV visible spectroscopy and the direct energy gap is found to be 3.083 eV. Functional groups present in the LNC NCs were analyzed by FTIR spectroscopy. X-ray/gamma radiation shielding properties were measured using NaI(Tl) detector coupled with MCA. It is found to be very close to Pb. Neutron shielding parameters were compared with traditional shielding materials and found LNC NCs are better than lead and concrete. Secondary radiation shielding known as Bremsstrahlung shielding characteristics also studied and found that LNC NCs are best in secondary radiation shielding. Hence LNC NCs find shielding applications in ionizing radiation such as X-ray/gamma and neutron radiation.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.4
• /
• pp.93-100
• /
• 2006

An experimental study of a counterflow heat exchanger was performed. The heat exchanger had an effective heat transfer length of 1000mm and was operated in a counterflow arrangement with hot water($30{\pm}0.5^{\circ}C$, $Re_i=3500{\sim}20000$) in the inner tube(copper tube, $d_0=9.52mm$) and cold water($15{\pm}0.5^{\circ}C$, $Re_{DH}=10700{\sim}39000$) in the annulus(copper tube, $D_0=19.05mm$). Overall heat transfer coefficients were calculated and heat transfer coefficients in the inner tube and the annulus were determined using Wilson plots. The inner Nusselt number was compared with that of Gnielinski's correlation and they agreed within ${\pm}10%$ error. The trends were typical for a fluid-to-fluid heat exchanger with the overall heat transfer coefficient increasing with both inner and annulus flow rates. In the range of this experiment, Nusselt numbers for the inner tube flow were almost identical with those of the annulus flow at the same Reynolds number.