• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.8-14
• /
• 2019

Bird-strike is one of the most important design factors for safety in the aviation industry. Bird-strikes have been the cause of significant damage to aircraft and rotorcraft structures and the loss of life. This study used DYTRAN software to simulate the transient response of an Euler-Lagrangian composite helicopter blade that has been impacted by a bird. The Arbitrary Lagrangian Eulerian (ALE) method and a suitable equation of state were applied to model the bird. ALE was applied to the bird-strike analysis due to the large difference between the properties of the blade and bird. The debris of the bird was assumed to be a fluid and applied as Euler elements after the collision. Through the analysis of bird impacts, the leading-edge of the rotor blade (50.8 mm) was used to identify a positive margin of 1.18 based on the TSAI-FILL criteria. The results are assessed to be sufficiently reliable and may be evaluated to replace tests with various analysis conditions. The structural stability of the rotor blade could be assessed by applying various load conditions and different modeling methods in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.208-216
• /
• 2019

Rural houses are losing their original shape as they mimic the spatial composition of urban houses. Therefore, the purpose of this study was to extract the design elements needed for rural housing by applying Christopher Alexander's "A PATTERN LANGUAGE" to Standard Rural-House Design (SRHD). The scope and method of research was to compare and analyze the standard designs (SD) produced and distributed by the 'Korea Rural Community Corporation' from 2009 to 2014. The research result is summarized as follows. 1) The housing layout in the SD ignored the site conditions of various rural areas. 2) Most of the houses were not actively planned, considering that they contain various activities of rural life. 3) There was no room for children and the kitchen was planned to integrate the interior into a flexible space in the form of L.D.K. 4) There was no space plan that could be used as both a leasable annex and office space for the farming community. 5) Many small area plans were made because of the SD plan for couples only in 2014. Although the rural environment and living patterns were ignored in the SD, the diverse pattern language provided by the pattern language was developed as a SD element for rural houses, which is the most suitable housing plan for the farmers' livelihood pattern.

• The Korean Journal of Archival Studies
• /
• no.3
• /
• pp.33-64
• /
• 2001

This essay introduces the basic method and program required to meet some necessary conditions of building university archives. By the phrase 'method and program', I intend the effective means of regularly but circumstantially controling the ways to the archival purposes proper which can be defined as the keeping of evidences and the broadening of information pool in terms of the evidential and informational natures or values of records. My starting point is about the matters of overcoming a standard method of induction which has long prescribed much passive procedures in the archival work. Considering the differences in the records and archives management-practices between West and Korea, I tentatively try to add some active elements to the archival work among which the collection for the expanding evidences and informations may firstly emphasized. While this collecting activity normally depends on the existing 'collections' and 'manuscripts', I cannot exclude the possibility of collections the materials, being likely to be registered in any poor or insufficient record groups. In the similar context, this kind of activity may and must be expanded beyond the university boundaries so at to arrange the cornerstones of archive-based local studies in the various disciplines. Here I premise another role of university archives, the role as 'science archives'. These archives within university archives seem likely to function in likewise the special collections within Western university libraries. What I mean here, however, is the archival groups purposedly gathered or acquisited according to more detail and narrower plan in order to meet the various demands from the different disciplines for the primary sources. The archival procedures from this revised method and program may, I hope, satisfy some of the preconditions of building university archives before the archives will actually function as a sub-institution of an university preserving legal, administrative and financial evidences, thus keeping identity and continuity of the university on the one hand, and as a local information center of supplying the archival contents on effectual demand from the field of local studies on the other. Finally, I conclude with a suggestion concerning the cooperation of all the parties of archival works. Proposing the 'Regional Research Center Program' in the field of technology and engineering as a model for the cooperation, I suggest that universities, private/public organizations, and central and local governments may work together for surveying the scattered ancient and modern documents as well as for building archives under the matching fund.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.50-55
• /
• 2019

Recently Ransomware attacks are continuously increasing, and new Ransomware, which is difficult to detect just with a basic vaccine, continuously has its upward trend. Various solutions for Ransomware have been developed and applied. However, due to the disadvantages and limitations of existing solutions, damage caused by Ransomware has not been reduced. Ransomware is attacking various platforms no matter what platform it is, such as Windows, Linux, servers, IoT devices, and block chains. However, most existing solutions for Ransomware are difficult to apply to various platforms, and there is a limit that they are dependent on only some specific platforms while operating. This study analyzes the problems of existing Ransomware detection solutions and proposes the onboard module based Ransomware detection system; after the system defines the function of necessary elements through analyzing requirements that can actually reduce the damage caused by the Ransomware from the viewpoint of users, it supports various OS without pre-installation and is able to restore data even after being infected. We checked the feasibility of each function of the proposed system through the analysis of the existing technology and verified the suitability of the proposed techniques to meet the user's requirements through the questionnaire survey of a total of 264 users of personal and corporate PC users. As a result of statistical analysis of the questionnaire results, it was found that the score of intent to introduce the system was at 6.3 or more which appeared to be good, and the score of intent to change from existing solution to the proposed system was at 6.0 which appeared to be very high.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.205-212
• /
• 2018

In order to overcome shortcomings of commercial analysis program for solving certain geotechnical problems, finite element method adopting isoparametric quadrilateral element was selected as a tool for analyzing soil behavior and calculating process was programmed. Two examples were considered in order to verify reliability of the developed program. One of the two examples is the case of acting isotropic confining pressure on finite element and the other is the case of acting shear stress on the sides of the finite element. Isoparametric quadrilateral element was considered as the finite element and displacements in the element can be expressed by node displacements and shape functions in the considered element. Calculating process for determining strain which is defined by derivatives using global coordinates was coded using the Jacobian and the natural coordinates. Four point Gauss rule was adopted to convert double integral which defines stiffness of the element into numerical integration. As a result of executing analysis of the finite element under isotropic confining pressure, calculated stress corresponding to four Gauss points and center of the element were equal to the confining pressure. In addition, according to the analyzed results for the element under shear stress, horizontal stresses and vertical stresses were varied with positions in the element and the magnitudes and distribution pattern of the stresses were thought to be rational.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.577-584
• /
• 2019

Recently, CSB(Cable-Stayed Bridge) have been attempted to be atypical forms for landscape elements in Korea. CSB with new geometry need to analyze their characteristics clearly to ensure structural safety. This study's bridge is the S-shaped curved pedestrian CSB that has a girder with S-shape plane curve and reverse triangular truss cross section, inclined independent pylon, modified Fan type main cable and vertical backstay cable. Curved CSB can have excessive lateral displacement and moment when the tension is adjusted, focusing only on longitudinal behavior, such as a straight CSB. In order to analyze the effect of the cable on the lateral behavior of bridges, the cable is divided into two groups according to the lateral displacement direction of the pylon due to tension. The influence of the combination ratio of GR1 and GR2 on the girder, bearing, pylon, and vertical anchor cable was analyzed. When the tension applied to the bridge is 1.0GR1 plus 1.0GR2, In the combination of 1.2GR1 plus 0.8GR2, the stress on the left and right upper member of the truss girder and the deviation of the both were minimized. In addition, the horizontal force of the bearing, the lateral displacement and moment of the pylon, and the tension of the vertical backstay cable also decreased. This study is expected to be used as basic data for determination of tension of CSB with similar geometry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.627-635
• /
• 2019

A programmable drone is a drone developed not only to experience the basic principles of flight but also to control drones through Arduino-based programming. Due to the nature of the training drones, the main users are students who are inexperienced in controlling the drones, which often cause frequent collisions with external objects, resulting in high damage to the drones' frame. In this study, the structural stability of the drone was evaluated by means of a structural dynamics based collision simulation for educational drone frame. Collision simulations were performed on three cases according to the impact angle of $0^{\circ}$, $+15^{\circ}$ and $-15^{\circ}$, using an analytical model with approximately 240,000 tetrahedron elements. Using ANSYS LS-DYNA, which provides excellent functions for the simulation of the dynamic behavior of three-dimensional structures, the stress distribution and strain generated on the drone upper, the drone lower, and the ring assembly were analyzed when the drones collided against the wall at a rate of 4 m/s. Safety factors resulting from the equivalent stress and the yield strain were calculated in the range of 0.72 to 2.64 and 1.72 to 26.67, respectively. To ensure structural stability for areas where stress exceeds yield strain and ultimate strain according to material properties, the design reinforcement is presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.186-196
• /
• 2018

Sports has become one way to improve our own health and to enjoy life by changing the lifestyle of modern-day people. Sports athletes not only give pleasure to the public, but also play a role in elevating a nation's reputation through sports. Tennis is popular with the public, and women players receive tennis wear from various sports companies to promote the designs to the public. This study considers the design-related characteristics of women's tennis wear through content analysis of design elements from the tennis wear in four major tournaments over the most recent five years. This is important in order to provide basic data on design directions for tennis wear in the future. The results of this study are as follows. First, the silhouette plays a role in enhancing activity by considering the physical movement of tennis players who are very active. Second, color emphasizes the rules and clarity of traditional tennis tournaments, and reflects a diversified trend in tennis wear by considering smooth game play by players and combining popular colors in the year. Third, patterns and decorations on material are used as a means to emphasize the esthetics of tennis wear, and tape plays an auxiliary role in emphasizing the physical beauty of women or preventing physical movement causing injury. In addition, sponsor logos are generally located at the center of the chest of tennis wear tops by mixing letters and images. This can be interpreted as a part of the marketing strategy to enhance clarity of the sponsor's brand.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.73-80
• /
• 2019

In this paper, the basic design of the electric hydraulic sliding deck system was developed to develop the electric hydraulic sliding deck which can easily upgrade the loading and unloading of the agricultural machinery by modifying the load of the existing 5ton cargo truck. Through the kinematic analysis, The length and structure of the specimens were designed and the materials were selected for safety and economical efficiency through structural analysis. For the basic design of the sliding deck system, we surveyed the agricultural machinery to be transported and selected necessary elements. And have devised a system using a hydraulic cylinder that can meet selected factors. Through the simplified modeling and kinematic diagram, the operating structure of the sliding deck system was grasped and the minimum length and structure of the sliding deck were devised, In order to select the sliding deck material satisfying, four representative materials used in the automobile structure were selected. Selected the parts to be analyzed and compared the stresses and deformation amounts according to the material under the conditions of maximum load through simplified modeling. As a result, SS41P material was used to reduce the unit cost and to achieve safety. The winch system was designed and applied for moving up and down of the farm machinery which can not be operated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.535-546
• /
• 2019

The purpose of this research was to analyze the relationship between human risk factors and evacuation behavior stages for tunnel safety. Therefore, we conducted a survey using a structured questionnaire on the relationship between safety facilities and safety behavior in order to derive an optimized interaction between the two. The research subjects were 141 tunnel users who understand the tunnel environment. The survey period was from June 24, 2018, to September 28, 2018. As data analysis methods, we employed a frequency analysis, a multiple regression analysis, and an independent-sample t-test. In the analysis of the correlation between the human risk factors and the major variables of evacuation behavior, the evacuation phases 1, 2, and 3 were all correlated with acceleration and delay, and the human risk factors were partially correlated. In the multiple regression analysis, the will to comply with laws (${\beta}=0.188$, p=0.034) and information recognition within the tunnel (${\beta}=0.220$, p=0.009) were factors that influence the relationship between human risk factors and evacuation behavior, indicating 12% explanatory power of the impact of human risk factors for the acceleration of evacuation behavior 3. The important variables between human risk factors and evacuation behavior were compliance with laws and information recognition in tunnels. Hence, it is necessary to study the elements that interact with the environment in the tunnel.