• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 대한환경공학회지
• /
• 제34권9호
• /
• pp.604-612
• /
• 2012

대학은 그 자체로 거대 소비 주체일 뿐만 아니라 구성원 및 지역 주민의 생활 및 인식 전반에 큰 영향을 미친다. 이에, 본 연구에서는 대학교에서 발생하는 직접, 간접, 기타 온실가스 배출을 포함한 인벤토리를 구축하여 그 배출특성을 파악하고, 배출특성을 고려한 대학 내 온실가스 배출 저감방안을 수립하였다. 사례로 선정한 S대학교의 연간 $CO_2$ 배출량은 10,452 t-$CO_2$ (0.65 t-$CO_2/m^2$)이었고, 에너지원별로 전기 78.0%, 가스 20.5%, 석유류 1.5%에서 기인하고 있었다. 에너지의 사용목적에 따른 온실가스 배출량은 조명 18.6%, 동력 36.7%, 가스냉방 1.2%, 전기냉방 10.2%, 가스난방 18.9%, 전기난방 12.5%, 취사 급탕 0.4%, 수송 1.5%로 나타났다. 전기사용에 의한 단위면적당 및 학생 1인당 연간 $CO_2$ 배출량은 각각 51.30 kg-$CO_2/m^2$와 981.86 kg-$CO_2$/인으로 조사되었고, 가스사용에 의한 배출량은 14.61 kg-$CO_2/m^2$와 24.01 kg-$CO_2$/인으로 조사되었다.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.252-261
• /
• 2017

본 연구에서는 유정용 강관의 열처리 조건에 따른 미세조직 및 기계적 성질을 조사하였다. 실험에 사용된 유정용 강관의 종류는 J55 강재를 사용 하였고, 열처리 조건은 각각 오스테나이트 처리온도 ($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), 냉각방식 (수냉, 유냉), 템퍼링 온도 (미실시, $550^{\circ}C$, $650^{\circ}C$) 이다. 열처리 조건에 따라 얻어지는 미세조직을 예측하기 위해 J55 강재의 화학적 성분을 기준으로 평형상태도와 CCT 곡선을 시뮬레이션 하였으며, 그 결과 A1, A3 온도가 약 $20^{\circ}C$ 감소 하는 결과를 얻을 수 있었다. 냉각속도에 따라 마르텐사이트, 베이나이트, 페라이트등 예상되는 미세조직을 정성적으로 알 수 있었고 이 결과는 실제 실험값과 유사한 양상을 나타내었다. 오스테나이트 처리온도가 증가 함에 따라 구 오스테나이트 결정립이 조대화 되었으며, 특히 $920^{\circ}C$ 이상에서 결정립 크기가 급격히 증가하였다. 따라서 결정립 미세화 효과에 따라 경도와 강도는 감소 하였다. 열처리 조건이 변화함에 따라 마르텐사이트, 베이나이트, 페라이트 등 다양한 조직이 생성되었으며, 이는 경도, 강도 및 연신율에 큰 영향을 미쳤다. 수냉의 경우 마르텐사이트 조직이, 유냉의 경우 베이나이트와 페라이트 조직이 형성되었으며 수냉한 시편이 더 우수한 기계적 성질을 나타내었다. 템퍼링 처리후 마르텐사이트 조직 내에 FeC 석출물이 생성되었고 템퍼링 처리온도가 증가함에 따라 FeC석출물이 조대화되면서 인성이 향상되었다.

• 수산해양기술연구
• /
• 제47권2호
• /
• pp.79-87
• /
• 2011

A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1129-1136
• /
• 2009

본 논문은 EEV를 이용한 냉각시스템의 성능특성에 관한 논문이다. 산업용냉각기는 고속으로 운전하는 공작기기의 열 변형을 줄이기 위해 사용되었으며, EEV는 냉각기의 용량조절을 위해 사용되었다. 본 장치는 압축기 출구에서 나온 핫가스를 증발기 입구로 보내는 핫가스 바이패스 시스템을 위해 설계되었다. 본 실험은 PID제어를 통한 고정도 온도제어 연구의 중간결과물이다. 실험의 결과로 핫가스 바이패스의 EEV스텝 조절을 통하여 증발압력의 상승과 냉동능력의 감소를 알 수 있었다. 본 실험의 결과를 통하여 효율적인 냉각기의 설계에 있어 기초 자료로 이용할 예정이다.

• 한국인터넷방송통신학회논문지
• /
• 제12권2호
• /
• pp.29-34
• /
• 2012

현재 ETCS 단말기가 대중화 되어가는 과정에서 문제점은, 톨게이트를 통과할 때 수행하는 과금 서비스 외에 별다른 서비스를 제공하지 않는다는 데 있다. 본 논문에서는 ETCS 단말기가 교통정보 수집/제공은 물론 OLED에 순간연비, 평균연비, 구간연비 소모량 측정 및 사용 금액을 표시함으로써 운전습관을 교정하도록 유도하여 연료를 절감할 수 있도록 하는 에코드라이빙 기능과 엔진오일, 냉각수, 팬벨트 등 차량의 소모품 교환시점 알림 기능과 ECU를 통해 엔진과열, 제너레이터 충전유무, 냉각수 과열 등 차량운행상태를 실시간으로 진단하여 운행 중 위험을 예방하는 정보를 제공하는 기능을 연구한다. 에코드라이빙과 차량소모품 알림기능 그리고 차량진단 서비스를 제공하기 위하여 제안하는 시스템은 차량의 상태정보를 수집하기 위한 OBD-II 기반 차량진단 모듈과 ETCS 단말기, 차량 진단 정보 변환 소프트웨어로 구성된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.133-138
• /
• 2005

Automotive pulleys play a key role in driving the cooling pump, oil pump, air-conditioner and so on by using an engine power. Researches on design processes and technologies of the pulleys can be found in many literatures. On the other hand, the areas related to manufacturing processes of the pulleys have been treated negligently. Vast data extracted from various information systems are transformed, integrated, and summarized to become a special database for helping users make a decision. The database, namely the data warehouse has been popularly used in the marketing and customer management of enterprises and recently applied to improve the design and manufacturing processes. In this study the manufacturing process of pulleys were analyzed through the intensive investigation of shop-floors and the interviews with workers and managers. The defects generated during a manufacturing process were categorized in a few types and the causes of defects examined for extracting the dominant parameters in the setup process for producing pulleys. As the first step to construct the data warehouse for the manufacturing processes of pulleys, authors proposed its architecture focused on the reduction of defect rate during the setup process.

• 대기
• /
• 제27권4호
• /
• pp.483-498
• /
• 2017

Sky view factor can quantify the influence of complex obstructions. This study aims to evaluate the best available SVF method that represents an urban thermal condition with land cover in complex city of Korea and also to quantify a correlation between SVF and mean air temperature; the results are as follows. First, three SVF methods comparison result shows that urban thermal study should consider forest canopy induced effects because the forest canopy test (on/off) on SVF reveals significant difference range (0.8, between maximum value and minimum value) in comparison with the range (0.1~0.3) of SVFs (Fisheye, SOLWEIG and 3DPC) difference. The significance is bigger as a forest cover proportion become larger. Second, R-square between SVF methods and urban local mean air temperature seems more reliable at night than a day. And as the value of SVF increased, it showed a positive slope in summer day and a negative slope in winter night. In the SVF calculation method, Fisheye SVF, which is the observed value, is close to the 3DPC SVF, but the grid-based SWG SVF is higher in correlation with the temperature. However, both urban climate monitoring and model/analysis study need more development because of the different between SVF and mean air temperature correlation results in the summer night period, which imply other major factors such as cooling air by the forest canopy, warming air by anthropogenic heat emitted from fuel oil combustion and so forth.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.173.1-173.1
• /
• 2011

The high fuel flexibility of gas turbine power system has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and sewage waste water as a fuel for gas turbines has increased. We investigated the performance of high pressure biogas compression system and operating conditions for supplying biogas. The total flow per minute of biogas from food waste water digestion tank is $54Nm^3$. The main type of biogas compression system is the reciprocating system and screw type system. The target of biogas mechanical data is the as belows; inlet pressure 0.045bar, supplying biogas temperature is $30{\sim}60^{\circ}C$, and final pressure is above the 25 bar. Also, inlet conditions of biogas consist of CH4 48.5%~83%, $H_2S$ Max. 500ppm, $NH_3$ Max. 1,500ppm and Siloxane 2.7~4.6ppm. The boosting Blower system raises a pressure from 0.045bar to 1bar before main compressor. The main system lay out of reciprocating consisits of compressor driver, filter, cooling system, blowdown vessel, control system and ESD(Emergency Shut Down) system. And an enclosure package needs to be installed for reducing noise up to 75dB. The system driver is the electronic motor of explosion proof type. Forthe compressor system reliable operation, the cleaning system something like particulate filter needs to be set up in the inlet of compressor and Coalescing Filter in the outlet of compressor. Particulate Filter has to be removed above $10{\mu}m$ size of the particles in biogas. The coalescing filter(Micofine Borosilicate Glass Fibers Filter treated phenol acid) also removes moisture and oil of above $0.3{\mu}m$ to be involved in high pressure biogas up to 90%~98%.

• Journal of Pharmaceutical Investigation
• /
• 제35권1호
• /
• pp.33-38
• /
• 2005

Recently increasing attention has been focused on solid lipid nanoparticles (SLN) as a parenteral drug carrier due to its numerous advantages that can come from both polymeric particle and fat emulsions, together with the possibility of controlled release and increasing drug stability. Lipophilic drugs such as paclitaxel, cyclosporin A, and all-trans retinoic acid have been successfully entrapped in SLN but the incorporation of hydrophilic drugs in SLN is very limited because of their very low affinity to the lipid. Therefore, as a new approach to improve the loading of hydrophilic drugs, a w/o/w emulsion technique has been developed. The primary objective of the current study was to improve the loading efficiency of a model hydrophilic drug, glycine (Log P = -3.44) into SLN. The proposed preparation process is as follows: A heated aqueous phase consisting of 0.1 ml of glycine solution in water (100 mg/ml), and poloxamer 188 (5 mg) were then added to a molten oil phase containing precirol (100 mg) and lecithin (5 mg). This mixture was dispersed by sonicator, leading to a w/o emulsion. A double emulsion (w/o/w) was formed after the addition of 2% poloxamer solution to the above dispersed system. After cooling the double emulsion, solid lipid nanosuspensions were successfully formed. The lipid nanoparticles had the mean particle size of 441.25 nm, and the average zeta potential of -20.98 mV. The drug loading efficiency was measured to be 8.54% and the drug loading amount was measured to be 0.92%. The w/o/w emulsion method showed an increased loading efficiency compared to conventional o/w emulsion method.