• 설비공학논문집
• /
• 제10권5호
• /
• pp.600-609
• /
• 1998

The experimental investigation of thermal response characteristics by the air flow through the porous media has been carried out. The packed spheres of steel or glass were considered as the porous media in the present study. Temperature distributions of the fluid in the porous media as well as pressure drops through the porous media were measured. The transient temperature variations in the porous media are compared favorably with the analytical results in the high Reynolds number ranges. However, in the low Reynolds number ranges, the experimental data deviate from the analytical results, due to the dominant heat conduction penetration to the upstream direction, which is not considered in the analytical model. The cool-down response of porous media is found to be dependent upon the specific dimensionless time considering the material property and air velocity. The heat discharge process is recommended to be operated until a certain time, considering the cost efficiency.

• 한국해양공학회지
• /
• 제23권2호
• /
• pp.69-73
• /
• 2009

The objective of this study was to obtain a better understanding of the delayed hydride cracking (DHC) of Zr-2.5Nb alloy. The DHC model has some defects: first, it cannot explain why the DHC velocity (DHCV) becomes constant regardless of an applied stress intensity factor, even though the stress gradient is affected by the applied stress intensity factor at the notch tip. Second, it cannot explain why the DHCV has a strong dependence on the method of approaching the test temperature by a cool-down or a heating-up, even under the same stress gradient, and third, it cannot predict any hydride size effect on the DHC velocity. The DHC tests were conducted on Zr-2.5Nb compact tension specimens with the test temperatures reached by a heating-up method and a cool-down method. Crack velocities were measured in hydrided specimens, which were cooled from solution-treatment temperatures at different rates by being furnace-cooled, water-quenched, and liquid nitrogen-quenched. The resulting hydride size, morphology, and distributions were examined by optical metallography. It was found that fast cooling rates, which produce very finely dispersed hydrides, result in higher crack growth rates. This different DHC behavior of the Zr-2.5Nb tube with the cooling rate after a homogenization treatment is due to the precipitation of the $\gamma$-hydrides only in the water-quenched Zr-2.5Nb tube. This experiment will provide supporting evidence that the terminal solid solubility of a dissolution (TSSD) of $\gamma$-hydrides is higher than that of $\delta$-hydrides.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.62-66
• /
• 2008

The characteristic of the superconducting magnetic energy storage(SMES) system is faster response, longer life time, more economical, and environment friendly than other uninterruptible power supply(UPS) using battery. So, the SMES system can be used to develop methods for improving power quality where a short interruption of power could lead to a long and costly shutdown. Recently, cryogen free SMES has developed using BSCCO(Bismuth Strontium Calcium Copper Oxide) wire. We fabricated and tested the conduction cooling system for the 600 kJ class HTS SMES. The experiment was accomplished for the simulation coils. The simulation coils were made of aluminium, it is equivalent to thermal mass of 600 kJ HTS SMES coil. The coil is cooled with two GM coolers through the copper conduction bar. In this paper, we report that the test results of cool-down and heat loads characteristics of the simulation coils. The developed conduction cooling system adapted to 600 kJ HTS SMES system and cope with the unexpected sudden heat impact, too.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.205-213
• /
• 1987

본 논문에서는 비압축 선형 점탄성재료를 원통체로 모델화하여 열하중에 대한 거동을 점유적 시간증분과정을 적용하여 수치해를 제시하고 원통체를 제작실험하여 변 형과 비파괴검사를 통해 측정하여 비교검토하였다. 또한 이론적 수치해와 시편과의 안전율을 각 파괴기준(failure criteria)에 적용하여 비파괴검사결과와 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2219_2220
• /
• 2009

The characteristics of the Superconducting Magnetic Energy Storage (SMES) system are faster response, longer life time, more economical, and environment friendly than other Uninterruptible Power Supply (UPS) using battery. Fast charge and discharge time of SMES system can provide powerful performance of improving power quality in the grid. In order to demonstrate the effectiveness of SMES, the authors make a 10kJ SMES system for connection with RTDS (Real Time Digital Simulator). Because the characteristics of superconducting magnet are very important in SMES system, the necessary items such as thermal characteristic, mechanical stress and protection circuit should be considered. In this paper, the authors experimented thermal characteristics of the 10kJ SMES system. The experiment was accomplished using a simulation coils made of aluminium. It has same dimension of the 10kJ class HTS SMES coil. The coil was cooled with GM (Gifford -McMahon) cryocooler through the OFHC (Oxgen Free High thermal Conductivity) conduction bar. The test results of cool down and heat loads characteristics of the simulation coils are described in detail.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.8-16
• /
• 2017

고체 추진기관이 노즐마개에 의해 외기와의 교환이 완벽히 차단된다면, 구조적 안정성은 제작초기 조건인 내부조성간의 잔류반응(Post Cure, Migration etc.), 그리고 자유공간 내의 산소(또는 산화방지제)와 습기(제습제)와의 반응에 종속된다. 이로부터 발생하는 혼합형 고체추진제의 기계적 특성은 매우 복잡하며, 추진기관은 발사직전까지 일교차/년교차의 끊임없는 열하중을 받게 된다. 본 연구에서는 고체 추진기관의 제조공정인 성형오븐에서 출고 후 저장안정화까지의 거동을 고체추진제의 열유변학적 단순특성을 적용하여 신속하게 산출할 수 있는 방법을 제시하였다. 이를 위해 온도제어 가능한 Endurance Test 장치를 고안 제작하였으며, 추가적으로 점진적 응력과 변형율 증가에 따른 비선형 특성도 검토한다.

• 대한간호학회지
• /
• 제25권3호
• /
• pp.538-548
• /
• 1995

Exercises are achievement oriented, the process is frequently perceived as hard and difficult Participants drop out from exercise programs in the middle of the training period. Dance movement, which is the deliberate and systematic use of movement, is enjoyable during the movement and provides opportunities for persons to express them-selves. Regular long term dance movement may in-duce a training effect with a decreased drop out rate. Dance movement could be one way to attain wellness, however, there have been few studies to evaluate both physiological and psychological aspects of dance movement. This study focused on evaluating the effects of dance movement training on body weight, resting blood pressure and heart rate, limb circumference and strength, stress response and subjective feelings. This quasi-experimental study was designed as a nonequivalent control group pre test -post test study. Ten healthy fe-male subjects, aged between 19 and 31 years volunteered for an eight week dance movement program. Ten healthy female subjects, between 19 and 21 years of age paticipated as controls. None of the subjects had performed regular physical activity for six months prior to the study. Dance movement was created with reference to Heber's movement guide. The Dance movement program consisted of approximately 30 minutes of dance, three days per week, for eight weeks. During each 30 minute work out, there were approximately 5 minutes of warm-up dancing, 20 minutes of conditioning dance and 5 minutes of cool-down dancing. The intensity for the conditioning phase was at between 60% and 65% of age-adjusted maximum heart rates. Body weight, resting blood pressure and heart rate, circumference of mid upper arm, mid thigh and mid calf, muscle strength of upper and lower limb, physical and psychological response to stress were measured prior to, and following the experimental treatment. Body weight was measured by digital weight scale(Kyung In Corp., Korea). Resting systolic and diastolic blood pressure were measured by sphygmomanometer, Resting heart rate was measured for one minute in a relaxed sitting position using the radial artery. Circumference of mid upper arm, mid thigh and mid calf was determined by tape measure. Muscle strength of the upper extremities was measured by a grip dynamometer (Takei Corp. No.1857, Japan) and that of the extremities was measured by the length of time the leg could be held at 45° Physical and psychological responses to stress were measured using the Symptoms of Stress (SOS)Scale. Paticipants in the dance movement were interviewed by the facilitator following the eight weeks, and their thematic responses about the dance movement were recorded. Following the eight week dance movement train-ing, body weight decreased significantly, circumference of mid thigh and mid calf increased. The length of time leg - raising could be held tended to increase following the dance movement training. Resting systolic and resting heart rate showed a tendency to decrease. Total mean score of stress response tended to de-crease, and mean score of habitual patterns, do-pression, anxiety / fear, anger and cognitive disorganization decreased remarkably following the eight week dance movement. Thematic responses about the dance movement were positive following the training.

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.301-307
• /
• 2010

형상기억합금(SMA)을 이용한 액추에이션 방식은 차세대 의료기기 시장을 선도할 중요한 핵심기술이다. 그 이유는 인간의 손동작과 같은 유연성과 섬세한 움직임을 구현할 수 있어서 시술자의 정교한 최소침습술(MIS) 테크닉을 그대로 인체내 병변치료에 적용할 수 있는 장점이 있기 때문이다. 그러나 아직까지 SMA 액추에이터가 상용화에 크게 성공을 거두지 못한 이유는 SMA 고유의 히스테리시스(hysteresis)와 같은 비선형적 동특성이 아직 해결되지 못하고 있기 때문이다. 이러한 한계성을 극복해줄 수 있는 방안으로 본 저자는 펠티에 효과(Peltier effect)를 이용한 열전소자를 SMA 카테터에 결합하여 능동적이고 신속하게 급열 급랭할 수 있는 SMA 액추에이터를 특허등록하였고, 본 연구를 통해 열전소자의 연속전류의 단계적 전류증가에 따른 온도변화, 불연속 정전류 역전류에 따른 온도변화를 평가하고 고찰하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.405-409
• /
• 2009

There are many types of walking exercise. We have choice the way according to the walking exercise purpose. Nordic walking(NW) is one of walking types with nordic poles. Also, power walking(PW) has motion of large swing the arm in walking, and dumbbell walking(DW) way is walking with 3-pound dumbbell. This study compared the physiological response(heart rate, energy expenditure) of general walking(GW) to another types(nordic, power, and 3-pound hand weights walking way). Seven apparently male health volunteers between the ages 19 and 24 years participated. Each complete a treadmill test. The tests were assigned randomly, as submaximal walking trials on separate days. Each walking trial was conducted on a level treadmill, for 40 minutes(3-5mile/hour 5min warm-up, 6mile/hour speed for 15min walking and 7mile/hour speed for 15min Jogging exercise, and 5-3mile/hour cool down 5min), at an same pace. Heart rate in beats per minute(bpm), and energy expenditure in kcal per minute(kcal/min) were recorded each minute. Results between trials were compared using repeated measures analysis of variance and Tukey's post hoc tests. In slow walking, it was found that walking with 3-pound hand weight way resulted in and average of ($127.8{\pm}8.27bpm$) the highest score HR, Caloric expenditure($85.4{\pm}14.51kcal/min$), responses compared to regular walking way($117.4{\pm}7.27bpm$ and $70.4{\pm}10.99kcal/min$). Nordic walking way($121.4{\pm}11.74bpm$, and $77.0{\pm}16.83kcal/min$) is second, power walking way($118.5{\pm}9.98bpm$, and $68.7{\pm}20.62kcal/min$) is next. In fast walking, it was found that walking way with 3-pound hand weight resulted in and average of ($160.1{\pm}8.72bpm$) the highest score HR, caloric expenditure($126.1{\pm}13.86kcal/min$), responses compared to regular walking way($148.4{\pm}11.94bpm$, and $109.0{\pm}4.70kcal/min$). Nordic walking way($156.7{\pm}10.82bpm$, and $113.5{\pm}14.51kcal/min$) is second, power walking way($149.7{\pm}12.56bpm$, and $109.2{\pm}17.64kcal/min$) is next. Thus, it is the unavoidable conclusion that, comparing with general walking, 3-pound hand weight walking, nordic walking, and power walking methods have the advantage of high exercise intensity and energy expenditure to meet the purpose of performers without the problem. Furthermore, 3-pound hand weight walking ways were proved to be a useful aerobic exercise method as whole body that achieves high-energy efficiency. To this extent, 3-pound hand weight walking ways can be recommended as a continuous and regulative aerobic exercise for some people.