• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5430-5437
• /
• 2011

본 연구의 목적은 친환경 무공해 승용 차량에 적용되는 전동식 냉방시스템의 성능특성을 실차에서 확인하는 것이다. 이를 위하여 인버터로 구동되는 전동식 스크롤 압축기를 적용한 전동식 냉방시스템을 설계 및 제작하여 수소 연료전지 자동차에 설치하여 다양한 주행도로 조건에서 실험을 진행하였다. 주행조건의 변화는 시험차량에 장착된 전동식 냉방시스템의 성능에 영향을 주었으며, 고속 및 일반도로 주행조건에서 냉방시스템의 성능이 정지조건에서 냉방시스템의 성능보다 우수하게 나타났다. 또한, 외기온도가 $20.0^{\circ}C$에서 $30.0^{\circ}C$로 증가함에 따라 고내 온도는 평균 $5.2^{\circ}C$ 더 적게 감소하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.111-117
• /
• 2003

In the design of the split type free displacer Stilting cryocooler the motion of the displacer is very important to decide the cooling capacity, which depends upon the working gas pressure, the swept volume in the compression space and the expansion space, operating frequency, the phase shift between piston and displacer, etc. In this study, Stirling cryocooler actuated by the electric farce of the dual linear motor is designed and manufactured. Cool down characteristics of the cold end with laser displacement sensor in the expander of the Stilting cryocooler is evaluated. The charging pressure was 15kg$_{f}$/$\textrm{cm}^2$ and operating frequency was 50Hz. Input power and the lowest temperature were about 32W and 67K, respectively. And, displacement of the piston is measured by LVDTs (Linear Variable Differential Transformers), displacement of thedisplacer is measured by laser optic method, and phase shift between piston and displacer is discussed. As the peak-to-peak pressure of the compressor was increased, peak-to-peak displacement of the displacer was increased. The peak-to-peak displacement of the displacer increases in the range of 0 - 64.5Hz(resonant frequency of the displacer), but decreases steeply when the operating frequency is bigger than the resonant frequency. Finally when the phase shift between displacements of the Piston and displacer is 45。, operating frequency is optimum and is decided by resonant frequency of the expander, mass and cross section area of the displacer and constant by friction and flow resistance.e.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2219_2220
• /
• 2009

The characteristics of the Superconducting Magnetic Energy Storage (SMES) system are faster response, longer life time, more economical, and environment friendly than other Uninterruptible Power Supply (UPS) using battery. Fast charge and discharge time of SMES system can provide powerful performance of improving power quality in the grid. In order to demonstrate the effectiveness of SMES, the authors make a 10kJ SMES system for connection with RTDS (Real Time Digital Simulator). Because the characteristics of superconducting magnet are very important in SMES system, the necessary items such as thermal characteristic, mechanical stress and protection circuit should be considered. In this paper, the authors experimented thermal characteristics of the 10kJ SMES system. The experiment was accomplished using a simulation coils made of aluminium. It has same dimension of the 10kJ class HTS SMES coil. The coil was cooled with GM (Gifford -McMahon) cryocooler through the OFHC (Oxgen Free High thermal Conductivity) conduction bar. The test results of cool down and heat loads characteristics of the simulation coils are described in detail.

• PNF and Movement
• /
• 제15권3호
• /
• pp.227-236
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of coordinative locomotor training (CLT) on the foot pressure and balance of patients with scoliosis. Methods: This was a single-case A-B-A study involving two patients with scoliosis. The study was designed to perform repeated measurements as follows: 5 times at baseline (A), 10 times during intervention (B), and 5 times after intervention (A). The study period was 5 weeks, and the CLT program was divided into warm up, CLT program, and cool down stages, at 50 min per stage. For the primary outcome measure, Gait View AFA-50 was used to determine the foot pressure and balance ability. For the secondary outcome measure, the SRS-22 questionnaire was used to assess the quality of life of the patients with scoliosis. Descriptive statistics and visual analysis using graphs were used to compare the rates of change. Results: The results of this study showed that the foot pressure and balance ability of the two subjects improved during the intervention period and remained improved even during the baseline period. However, their quality of life did not change after the intervention. Conclusion: CLT may have a positive effect on foot pressure and balance ability in patients with scoliosis. Also, this body function improvement may have positive effects on the performance of daily activities which employ the upright position.

• 여성건강간호학회지
• /
• 제10권4호
• /
• pp.301-310
• /
• 2004

Purpose: The purpose of this study was to develop an exercise program for postmastectomy patients. Method: This study was conducted from October, 2003 to June, 2004. The exercise program was developed based on literature review and needs assessment using focus group interviews. The subjects for the focus group interview consisted of 11 patients, 13 recovering patients, and 20 nurses from 3 hospitals. Development of the program was proceeded with analysusm design and development steps. Result: The results of the needs assessment using the focus group interview showed that the exercise program was imperative for postmastectomy patients. Based on the results, a home video tape containing 3 steps, was developed. Each step includes warming-up, stretching, the main exercise, and cool-down. Steps 2 and 3 include exercises with an elastic band, and an elastic ball. The program was modified after conducting a pre-test. A self-checklist including shoulder mobility, hand strength, arm volume and subjective comments on how they feel will be used before and after the exercise program. Conclusion: The exercise program will improve breast cancer patients' quality of life and their physical well-being. Further studies are recommended to test the effectiveness of the exercise program.

• Nuclear Engineering and Technology
• /
• 제40권6호
• /
• pp.467-476
• /
• 2008

To keep the superconducting (SC) magnet coils of KSTAR at proper operating conditions, not only the coils but also other cold components, such as thermal shields (TS), magnet structures, SC bus-lines (BL), and current leads (CL) must be maintained at their respective cryogenic temperatures. A helium refrigeration system (RRS) with an exergetic equivalent cooling power of 9 kW at 4.5 K without liquid nitrogen ($LN_2$) pre-cooling has been manufactured and installed. The main components of the KST AR helium refrigeration system (HRS) can be classified into the warm compression system (WCS) and the cryogenic devices according to the operating temperature levels. The process helium is compressed from 1 bar to 22 bar passing through the WCS and is supplied to cryogenic devices. The main components of cryogenic devices are consist of cold box (C/B) and distribution box (D/B). The C/B cool-down and make the various cryogenic helium for the KSTAR Tokamak and the various cryogenic helium is distributed by the D/B as per the KSTAR requirement. In this proceeding, we will present the commissioning results of the KSTAR HRS. Circuits which can simulate the thermal loads and pressure drops corresponding to the cooling channels of each cold component of KSTAR have been integrated into the helium distribution system of the HRS. Using those circuits, the performance and the capability of the HRS, to fulfill the mission of establishing the appropriate operating condition for the KSTAR SC magnet coils, have been successfully demonstrated.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.57-61
• /
• 2022

One of the major applications of REBCO coated conductor (CC) tapes is in superconducting magnets or coils that are designed for high magnet fields. For such applications, the CC tapes were exposed to a high level of stresses which includes uniaxial tensile or transverse compressive stresses resulting from a large magnetic field. Thus, CC tapes should endure such mechanical load or deformation that can influence their electromechanical performance during manufacturing, cool-down, and operation. It has been reported that the main cause of critical current (I_c) degradation in CC tapes utilized in coil windings for superconducting magnets was the delamination due to transversely applied stresses. In most high-magnetic-field applications, the operating limits of the CC tapes will likely be imposed by the electromechanical properties together with its I_c dependence on temperature and magnetic field. In this study, we examined the influence of the transverse compressive stress on the I_c degradation behaviors in various commercially available CC tapes which is important for magnet design Four differently processed REBCO CC tapes were adopted to examine their I_c degradation behaviors under transverse compression using an anvil test method and a newly developed instantaneous I_c measurement system. As a result, all REBCO CC tapes adopted showed robustness against transverse compressive stresses for REBCO coils, notably at transverse compressive stresses until 250 MPa. When the applied stress further increased, different Ic degradation behaviors were observed depending on the sample. Among them, the one that was fabricated by the IBAD/MOCVD process showed the highest compressive stress tolerance.

• 한국학교ㆍ지역보건교육학회지
• /
• 제13권3호
• /
• pp.57-71
• /
• 2012

Objectives: This study examines the situation regarding smoking among high school students in Seoul Province and identifies smoking-related factors. Methods: The study sample consisted of 1,000 high school second-grade students from 6 high schools in Seoul. The PRECEDE model was used to assess the students' needs. We carried out an educational diagnosis on attitudes, outcome expectations and social norms. Date were collected from June. 7 to 21, 2011, and were analyzed using SPSS-15.0 according to the study objectives. Results: Of 906 respondents, 9.4% had experiences to smoking: 12.7% were male and 5.7% were female. Smoking-related factors from among general characteristics were statistically significant depending on the degree of gender($x^2$=14.515, p=.001), school performance($x^2$=40.289, p=.001) and friends 'smoking status($x^2$=88.615, p=.001). Factors concerning attitudes toward smoking were statistically significant depending on the students' perceptions as follows: 'Smoking is fun(t=-14.801, p=.000)', 'Smoking looks cool(t=-10.349, p=.000)', 'People who smoke have more friends(t=-11.295, p=.000)', 'Smoking helps me manage stress(t=-15.059, p=.000)' and 'Smoking is not harmful to the body if you exercise(t=-6.388, p=.000)'. Factors concerning outcome expectations were statistically significant depending on their perceptions as follows: 'Tobacco smells good(t=-8.939, p=.000)' and 'Smoking helps in weight management (t=-7.304, p=.000)'. Factors concerning social norms were statistically significant depending on the following perception: 'My friends will not like it if I smoke(t=4.605, p=.000)'. The following influence high school students attitudes toward smoking: School performance (OR=11.66, 95%CI=1.67~81.37; OR=18.27, 95%CI=2.58~129.24; OR=26.74, 95%CI=3.06~233.79), Friends smoking status(OR=80.05, 95%CI=6.94~922.77), 'Smoking is fun(OR=12.90, 95%CI=3.87~43.04; OR=63.41, 95%CI=10.66~377.09)', 'Smoking looks cool(OR=0.15, 95%CI=0.03~0.64)', 'Smoking is not harmful to the body if you exercise(OR=1.44, 95%CI=0.03~0.62)', 'When there is no work to do, smoking is a good way to pass the time(OR=21.68, 95%CI=4.27~109.90)', 'When you are angry, smoking calms you down.(OR=13.39, 95%CI=3.92~45.65; OR=8.69, 95%CI=1.67~45.13)' and 'My parents consider it important that I do not smoke(OR=10.05, 95%CI=1.00~100.43)'. Conclusions: The study suggests that effective ways to discourage of high school students from smoking are changing their attitudes toward smoking, reducing the motivation to smoke, and controlling the number of cigarettes. Therefore, aiming at preventive education. Schools must provide accurate information about the effects of smoking. Thus, health education should actively involve preventive education not only in schools but also at home, the societal and national levels. Cooperation between various sectors of society is required for this.

• 공업화학
• /
• 제31권6호
• /
• pp.596-602
• /
• 2020

점/접착제 생산 공정은 배합 과정에서 mineral insulated (MI) cable을 통해 내부 용액을 76 ℃까지 가열 및 혼합 후 제품 출하를 위해 30 ℃까지 상온 냉각을 진행한다. MI cable을 이용한 반응기의 경우, 냉각시간이 평균 10 h 소요되어 생산효율이 낮은 문제점이 있지만, jacketed vessel을 설치하면 위의 문제를 효과적으로 해결할 수 있다. 그러나 jacketed vessel의 종류가 다양해 jacket을 설치하기 전, 배합 공정조건에 적합한 종류를 찾아야 한다. 본 연구에서는 생산효율에 영향을 주는 냉각시간을 최소화하기 위해 computational fluid dynamics (CFD)를 이용하여 jacket 종류에 따른 냉각시간을 비교해 공정에 적합한 jacketed vessel 모델을 개발하고, 점/접착제 생산 공정에 최적화된 jacketed vessel을 설계하였다. 연구 결과, jacket의 높이가 같을 때, half-pipe coil jacket보다 plain jacket의 냉각 성능이 32.7% 더 우수하였고, plain jacket에 60% spiral baffle을 설치하여 냉각 공정에 이용할 경우 냉각시간을 80.4%, 작업시간을 25.1% 단축 가능하다.

• 생명과학회지
• /
• 제32권4호
• /
• pp.325-330
• /
• 2022

수영은 육상과 더불어 대표적인 기초 종목으로 손, 발을 사용하여 물속에서 헤엄치는 종목이기 때문에 기술적 훈련과 더불어 물의 압력에 따른 신체적 적응이 매우 중요하게 고려된다. 수영은 지상의 운동과는 다르게 물속에서 손과 발을 이용해 나아가고, 물의 저항으로 인해 근육을 움직이는 전신운동으로 높게 평가되고 있으며, 비만의 예방과 혈관질환의 치료에 많이 사용되는 운동 중 하나이다. 비교적 안전한 종목에 속하지만 다른 스포츠 종목들과 비슷하게 크고 적은 스포츠 상해가 발생 한다. 하지만 현재까지 수영 종목에서 유발되는 상해와 재활에 관한 연구 자료는 부족한 상황이다. 수영 선수의 상해는 일반적으로 고강도의 훈련, 많은 훈련 량 등으로 인해 발생하며, 수영 선수들에게 가장 많이 발생하는 상해와 질환으로는 극상근건염(supraspinatus tendinitis), 이두근건염(biceps tendinitis), 슬관절의 내측 활액막염(synovitis), 발등의 신근 건염(extensor tendinitis), 요통(low back pain)을 동반하는 척추분리증(spondylolysis), 척주전방전위증(spondylolisthesis) 등이 있다고 보고되고 있다. 또한 수영 경영 선수의 스포츠상해 부위 및 빈도조사 연구분석에 의하면 상해부위는 어깨관절(50%), 허리(23%), 하지(22%) 등의 순으로 높게 나타났으며, 상해종류로는 근육 손상과 인대손상이 대부분을 차지한다. 본 연구결과 수영 종목의 상해 부위는 상지(목, 어깨, 팔, 손목), 하지상해(무릎, 발목), 및 허리상해 순으로 나타났다. 그리고 영법별 상해분석으로 자유형, 배영, 접영 영법에서는 어깨 부위 상해가 많이 발생하였고 회전근개손상, 충돌증후군, SLAP (superior labral tear from anterior to posterior) 병변 순으로 나타났다. 평영 영법은 하지손상인 무릎손상, 평영과 접영은 척수상해, 접영은 허리상해 순서로 나타났다. 따라서 지도자는 선수들이 부상을 당하지 않도록 충분한 준비운동과 정리운동을 실시하도록 하고, 응급처치를 숙지하여 부상 발생 시 빠른 응급처치로 2차 손상을 예방할 수 있도록 해야 한다. 아울러 코치 및 지도자는 선수들에게 알맞는 재활 방법들을 처치하고, 선수들의 상해 예방과 처치에 대한 이해와 교육이 수반되어야 할 것이다. 추후 수영 영법 별 상해 예방과 상해 처치 그리고 재활방법에 관한 구체적인 기전적 연구들이 수행 되어져야 할 것으로 사료된다.