• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.138-143
• /
• 2000

In order to maintain the faith and accuracy with precision of machinery, it is recently required the precise comprehension about approach which is appeared in the contact area between two bodies, because approach affects the static stiffness and dynamic characteristic of contact area. This study applied H. Hertz's circle contact area theory as much lower measuring force. It is measured approach influenced by various factors which were concerned with contact errors like material, form of two bodies, using calibration tester. As a result, the following conclusion can be obtained. 1) The approach appears greatly in order of carbon steel(SM20C), aluminum(A601-T6) and high density polyethylene(5305E) 2) The approach appears in order of concave, disc, convex form, in the ration of contact area size by the difference of curvature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2676-2681
• /
• 2008

In previous studies, Convex cyclone are proposed to reduce pressure loss which are design cyclone wall with a single continuous curve. Studies about a prediction model for pressure loss and cut-size has focused on conventional cylinder-on-con cyclone. Therefore, the models do not perform well for uncommon design. In this study, a predict model for pressure loss and cut-size depend on cyclone wall curvature are developed. The tangential velocity below vortex-finder is obtained with consideration about friction area and momentum loss on the cyclone wall, and with this the variation of vortex-core and core velocity is obtained. Pressure loss is predicted using a Rankine vortex hypothesis. The prediction results are well agreed with experiments and CFD results.

• 센서학회지
• /
• 제22권5호
• /
• pp.352-356
• /
• 2013

We developed a novel fabrication method of polydimethylsioxane (PDMS) lens, which can easily control the shapes of the lens using soft lithography with common photolithography and water droplet molding. A mold for PDMS lens was prepared by patterning of hydrophobic photoresist on the hydrophilic substrate and dispensing small water droplets onto the predefined hydrophilic patterns. The size of patterns determined the dimension of the lens and the dispensed volume of the water droplet decided the radius of curvature of the PDMS lens independently. The water droplet with photoresist pattern played a robustly fixed mold for lens due to difference in wettability. The radius of curvature could be calculated theoretically because the water droplets could approximate spherical cap on the substrate. Finally, concave and convex PDMS lenses which could reduce or magnify optically were fabricated by curing of PDMS on the prepared mold. The measured radii of the fabricated PDMS lenses were well matched with the estimated values. We believe that our simple and efficient fabrication method can be adopted to PDMS microlens and extended to micro optical device, lab on a chip, and sensor technology.

• 한국수학사학회지
• /
• 제20권4호
• /
• pp.49-60
• /
• 2007

본 논문에서는 초등기하에 나오는 도형의 합동의 개념으로부터 자연스럽게 얻어지는 3차원 유클리드 공간에 있는 매끄러운 곡면의 강성의 개념을 소개하고 컴팩트 곡면의 강성이론의 발전과정과 그 일반화를 살펴본다.

• 대한수학회보
• /
• 제33권4호
• /
• pp.537-544
• /
• 1996

Crofton's formula on Euclidean plane $E^2$ states: Let $\Gamma$ be a rectifiable curve of length L and let G be a straight line. Then $$ \int_{G \cap \Gamma \neq \phi} n dG = 2L $$ where n is the number of the intersection points of G with the curve $\Gamma$.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• 청정기술
• /
• 제18권3호
• /
• pp.295-300
• /
• 2012

입자의 크기, 모양, 및 기능기를 제어할 수 있는 제조 기술은 화학, 생물, 재료과학, 화학 공학, 의약 그리고 생명공학과 같은 다양한 적용분야에 적용될 수 있는 중요한 기술중의 하나이다. 본 연구는 볼록한 지붕을 지니는 이방성 고분자 입자의 곡률 제어를 위해 젖음성 유체를 도입한 새로운 미세몰딩(micromolding technique) 방법에 관한 것이다. 몰드의 종횡비 조절을 통하여 입자의 곡률 반경을 $20{\mu}m$에서 $70{\mu}m$까지 제어할 수 있었으며 서로 다른 습윤특성을 지닌 젖음성 용액을 이용하여 이방성 고분자 입자의 높이와 곡률반경을 조절할 수 있었다. 본 연구에서 제시한 미세몰딩 기술은 저렴하고, 간단하고, 쉽고 빠른 방법으로 이방성 입자를 제작할 수 있으며 3차원 입자 모양의 정밀제어가 가능한 새로운 방법으로 판단된다.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1473-1480
• /
• 1999

In the case of Impingement of plane moving shock wave over concave or convex double wedges (pseudo-stationary flow) and cylindrical walls (truly non-stationary flow), it Is expected that there are transitions from regular reflection to Mach reflection or vice versa In shock wave reflections. In these connections, it is necessary to verify the various of reflection process and transition angle for the reflection problems In double wedges, and to verify the transition angle, effects of curvature radius and initial wall angle on it for the reflection problems In cylindrical walls. Especially, we focused our attention to confirm the existence of hysteresis phenomenon induced by the different transition processes, and Neumann paradox, which is a small discrepancy between theoretical and experimental transition angles. Experiments were carried out by using the shock tube of $6{\times}6cm^2$, and high speed photographic technique consisted of delay unit, triggering system, light source of Xe lamp and so on was used for flow visualization.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2575-2580
• /
• 2013

본 논문에서는 RE엔진에 적용하기위한 흡기포트를 CFD 기술을 활용하여 개발하였다. 3차원 모델링을 진행하고 전산유체해석을 진행하였으며, 계산된 유량계수와 스월계수를 실험결과와 비교 분석하였다. 흡기포트의 convex 및 concave부 곡률을 최적화하여 Recirculation의 발생과 유동저항을 저감하였다. 결과적으로, 계산된 평균 유량계수는 0.383이고, 평균 스월수는 1.544로 일반적인 2밸브 엔진 시스템의 평균성능에 상회하는 우수한 성능을 나타내었다.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.236-242
• /
• 2012

In general, such methods as interferometers or wavefront sensors are commonly used for testing of an optical system and optical components. In these cases, the surrounding environments are unlikely to affect the measurements. On the other hand, intraocular lenses of hydrophilic materials with special properties experience a certain difficulty in testing the optical properties. An intraocular lens is dried in the air, which causes deformation and changes the optical characteristics such as index of refraction and thickness. Thus, it is hard to measure the optical characteristics of an intraocular lens by using common methods. In this study, a special structure is used for measuring of the transmission wavefront aberration and effective focal length of an intraocular lens of hydrophilic materials by using a Shark-Hartmann sensor among the various measuring methods. As an application of this measuring method, this study shows a simple method to measure the index of refraction of unknown liquids with a plano-convex lens with a well known index of refraction. Also, this method is used to measure the optical properties of a plano-convex such as index of refraction and curvature by using a liquid with a well known index of refraction.