• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.126-132
• /
• 2004

The database design for the management of bridge measurement information is presented in this paper. To express the associated data generated during the whole process of ambient measurement efficiently, requirements analysis for database construction is performed. And to define objects and organize schema conceptual and logical design are performed, which convert data model into logical schema. Finally, physical design is performed using DDL(data defined language). This database is based on the object-relational data modeling approach that has rich expressive power and good reusability in comparison with the traditional entity-relational modeling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.239-239
• /
• 2010

This paper describes the design and analysis of AlN piezoelectric micro generator. The generator was designed to convert ambient vibration energy to electrical power as a AlN piezoelectric material compatible with integataion process. From the simulation results, the resonance frequency of designed model is about 360 Hz and analyzed the bending mode, displacement and expectation output.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.286-293
• /
• 2003

Our Railroad has been decided to convert the system from government enterprise to privitization since 1989. But These Policy has been changed 3times. Therefore I wish to survey the proecss, which is the main factor to change the policy. Firstly, I made a hypothesis concerning the policy making process. Secondly, I described the policy process concisely. Thirdly, I analysized the policy making process. In conclusion, I suggested the rational policy process model.

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.506-514
• /
• 2008

This paper presents an intelligent model; named as free model, approach for a closed-loop system identification using input and output data and its application to design a power system stabilizer (PSS). The free model concept is introduced as an alternative intelligent system technique to design a controller for such dynamic system, which is complex, difficult to know, or unknown, with input and output data only, and it does not require the detail knowledge of mathematical model for the system. In the free model, the data used has incremental forms using backward difference operators. The parameters of the free model can be obtained by simultaneous perturbation stochastic approximation (SPSA) method. A linear transformation is introduced to convert the free model into a linear model so that a conventional linear controller design method can be applied. In this paper, the feasibility of the proposed method is demonstrated in a one-machine infinite bus power system. The linear quadratic regulator (LQR) method is applied to the free model to design a PSS for the system, and compared with the conventional PSS. The proposed SPSA-based LQR controller is robust in different loading conditions and system failures such as the outage of a major transmission line or a three phase to ground fault which causes the change of the system structure.

• 한국농공학회지
• /
• 제37권5호
• /
• pp.35-42
• /
• 1995

his paper is to develop a GIS application model (GISCELWAB) for the spatial simulation of surface runoff from a small watershed. The model was constituted by three submodels : The input data extraction model (GISINDATA) which prepares cell-based input data automatically for a given watershed, the cell water balance model (CELWAB) which calculates the water balance for a cell and simulates surface runoff of watershed simultaneously by the interaction of cells, and the output data management model (GISOUTDISP) which visualize the results of temporal and spatial variation of surface runoff. The input data extraction model was developed to solve the time-consuming problems for the input-data preparation of distributed hydrologic model. The input data for CELWAB can be obtained by extracting ASCII data from a vector map. The output data management model was developed to convert the storage depth and discharge of cells into grid map. This model enables to visualize the spatial formulation process of watershed storage depth and surface runoff wholly with time increment.

• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.1-8
• /
• 2009

본 연구는 기존의 버스 운영계획모형을 시스템 다이나믹스(System Dynamics : SD) 관점에서 검토하는 것을 주된 목적으로 하고 있다. 결정변수들 간의 선형적 관계에 기초한 교��비용모델에 SD관점을 적용하여 순환적 관계로의 재구성을 시도하였으며, 그 결과물로 최적배차간격모형의 인과지도(Causal Loop Diagram)을 제시하였다. 또한 계량적 시뮬레이션이 가능한 저유량 인과지도(Stock & Flow Diagram)을 작성하여 시뮬레이션 결과의 의미를 논의하였다. 연구결과, 시뮬레이션에 적용한 수식이 기존의 교통비용모형에 토대를 두고 있기 때문에 시뮬레이션 결과가 기존의 연구와 큰 차이를 보이지 않았다.

• 천문학논총
• /
• 제12권1호
• /
• pp.1-21
• /
• 1997

We have obtained theoretical calibration curves to convert the amount of polarization into the strength of magnetic field, by a numerical calculation of radiation transfer for the polarized spectral line of FeI $6303{\AA}$. In our calculation, three kinds of atmospheric models (VAL-C, penumbra, umbra) have been used to make a proper calibration for an active region composed of quiet, penumbral and umbral areas. It was found that firstly, the results of our calculation depend highly on a kind of atmospheric model rather than on any other input parameters used in a model. Secondly, observed line profile showed m solar spectrum atlas proved to be very similar to the calculated profiles obtained by using a penumbra model. Finally, another method except this calibration curve should be developed to estimate correctly the distribution of magnetic field in solar active region from the observation of polarized spectral line.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.217-224
• /
• 1999

A semi-stochastic process model of reliability was established for hyperbolic cooling towers subjected to combined loadings of wind force, self-weight, temperature loading. Effect of the soil-structure interaction on reliability was evaluated. By involving the gust factor, an equivalent static scheme was employed to convert the dynamic model to static model. The TR combination rule was used to consider relations between load responses. An analysis example was made on the 90M cooling tower of Maoming, Guangdong of China. Numerical results show that the design not including interaction turns to be conservative.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.277-277
• /
• 2009

In this paper, PMPG (Piezoelectric Micro Power Generator) was investigated by ANSYS FEA (Finite Element Analysis) to decrease operating frequency and improve out power. The micro power generator was designed to convert ambient vibration energy to electrical power as a ZnO piezoelectric material. To find optimal model in low vibration ambient, the shape of power generator was changed with different membrane width, thickness, length, and proof mass size. Used the ANSYS modal analysis, bending mode and stress distribution of optimal model were analyzed. Also, the displacement with the frequency range was analyzed by harmonic analysis. From the simulation results, the resonance frequency of optimal model is about 373 Hz and confirmed the possibility of ZnO micro power generator for wireless sensor node applications.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.69-81
• /
• 2005

As collaborative design and configuration design gain increasing importance in product development, it becomes essential to exchange parametric CAD models among participants. Parametric CAD models can be represented and exchanged in the form of a macro file or a part file that contains the modeling history of a product. The modeling history of a parametric CAD model contains feature specifications and each feature has selection information that records the name of the referenced topological entities. Translating this selection information requires solving the problems of how to identify the referenced topological entities of a feature (persistent naming problem) and how to convert the selection information into the format of the receiving CAD system (naming mapping problem). The present paper introduces the problem of exchanging parametric CAD models and proposes a solution to naming mapping.