• 전기학회논문지P
• /
• 제58권1호
• /
• pp.20-26
• /
• 2009

In this paper, the switching mode conversion type pulse charger by fly-back converter method for lead battery of the solar cell generator equipment is proposed. And we propose the control circuit and design method of insulated switching mode convert type pulse charger by fly-back convert method in the lead battery. The proposed system can minimize the current consumption by digital pulse. Also the proposed system can generate the constant 10[KHz] frequency, transmit the signal with main control system in the power control system. And it supervises the state of lead battery using one chip micro processor. The proposed the switching mode conversion type pulse charger by the fly-back converter method can charge fast and stabilize lead battery with nominal value 12[V], 20[AH]. Also we propose the design procedure of the power control circuit for turn ratio of fly-back inductor and determining method of values such as the charging current, bulk current, partial current, over current value and fixed charging voltage. The experiment results for the voltage and current wave for partial, bulk, over and fixed charging period show the good charging effect and performance. And the PCB and internal coupling diagram of the switching mode conversion type pulse charger by fly-back converter method is presented.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.78-86
• /
• 2018

The 3D mesh model is used in various fields, such as virtual reality, shape-based searching, 3D simulation, reverse engineering, 3D printing, and laser scanning. There are various formats for the 3D mesh model, but STL and OBJ are the most typical. Since application systems support different 3D mesh formats, developing technology for converting 3D mesh models from one format into another is necessary to ensure data interoperability among systems. In this paper, we propose a method to convert a 3D mesh model in STL format into the OBJ format. We performed the basic design of the conversion system and developed a prototype, then verified the proposed method by experimentally converting an STL file into an OBJ file for test cases using this prototype.

• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.105-111
• /
• 2010

본 논문에서는 배터리전원 또는 태양광과 연료전지 등의 신재생 전원에서 발생되는 저전압 에너지원을 고전압으로 변환하기 위한 DC-DC 컨버터의 설계에 대해 연구하였다. 입력 DC24[V] 전압을 출력전압 400[V]로 변환하기 위한 H-브리지 컨버터의 회로 토폴로지에 있어 출력측 전력 및 전압을 제어하기 위해 위상천이제어를 적용하여 구현하였다. 제안된 컨버터 시스템의 장점으로는 전류 스트레스 감소 및 높은 효율성, 신뢰성 및 단순화된 관리뿐만 아니라 저렴한 비용 등을 들 수 있으며, 가정용 전력 생산을 위한 시스템으로 매우 유용하다는 것을 알 수 있었다.

• Korean Journal of Geomatics
• /
• 제3권1호
• /
• pp.7-14
• /
• 2003

For GIS to land and sea in Korea, GIS on land was almost completed with big cities by NGIS(National Geographic Information System) business. However, MGIS(Marine Geographic Information System) being constructed by the National Oceanographic Research Institute is still constructing geography information and definition of attribute information and real condition. We are being studied on research to get maximized the ripple effect linking GPS and Navigation techniques on GIS. GPS in accuracy is divided into navigation and precise surveying equipment. Now, GPS technology has been developed very much and low price GPS equipments are introducing. But expense on GPS equipment is high yet. Therefore, GPS equipment for navigation is used on cheap GPS equipment in a car or ship. In this paper, the author used algorithm to convert ellipsoid coordinate between WGS84 and Bessel ellipsoid and to analyze map projection between BESSEL ellipsoid and UTM plane coordinate system. And the author developed ship navigation system with cheap GPS equipment using algorithm of ellipsoid conversion and map projection. The author proposed the necessity on constructing MGIS to manage many ships.

• Computers and Concrete
• /
• 제4권4호
• /
• pp.285-298
• /
• 2007

Corrosion of Reinforcement (rebar) is nondestructively estimated by the half-cell potential measurement. As is the case with other nondestructive testings (NDT), understanding of the underlying principles should be clarified in order to obtain meaningful results. Therefore, the measurement of potentials in concrete is analytically investigated. The effect of internal defects on the potentials measured is clarified numerically by the boundary element method (BEM). Thus, a simplified inversion by BEM is applied to convert the potentials on concrete surface to those on rebars, taking into account the concrete resistivity. Because the potentials measured on concrete surface are so sensitive to moisture content, concrete resistivity and surface condition, an inverse procedure to convert the potentials on concrete surface into those on rebars is developed on the basis of BEM. It is found that ASTM criterion is practically applicable to estimate corrosion from the potential values converted. In experiments, an applicability of the procedure is examined by accelerated corrosion tests of reinforced concrete (RC) slabs. For practical use, the procedure is developed where results of IBEM are visualized by VRML (Virtual Reality modeling Language) in three-dimensional space.

• 한국멀티미디어학회논문지
• /
• 제13권8호
• /
• pp.1212-1220
• /
• 2010

국내의 사용자 프로그램으로 Port Redirection 서버를 통해 주소 변환 정보를 받아 사용자의 트래픽을 변환시키는 기술은 미비하다. 일반적으로 네트워크 장비에서 구현되는 기술로써 네트워크 장비를 경유하여 입출력되는 트래픽에 대해 특수한 목적으로 활용하는 네트워크 기술의 일부이다. 이러한 특수 목적을 달성하기 위한 L4 Switch 장비와 네트워크 구조에 따라 여러 대의 추가적인 비용들이 발생한다. 이러한 문제점을 개선하기 위하여 단말기의 Network Layer에서 L4 스위치의 Redirection기능을 구현하여 네트워크 구조에 관계없이 원하는 Traffic을 한 곳으로 집중시켜 통제와 모니터링을 중앙 집중하여 관리할 필요성이 있다. 따라서, 본 논문에서는 Client 단에서의 Protocol Redirection을 통한 트래픽의 중앙통제시스템을 제안하고자 한다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제35권12호
• /
• pp.774-779
• /
• 2008

본 논문에서는 토픽 시그너처(Topic Signature)를 이용하여 댓글을 분류하는 시스템에 대해서 설명한다. 토픽 시그너처는 자질을 선택하는 방법으로 문서요약이나 문서분류에서 사용하는 방법이다. 댓글은 문장의 길이가 짧고 띄어쓰기가 거의 없으며 특수문자들이 많은 특성을 가지고 있다. 따라서 우리는 댓글을 7개의 음절로 나누고 이를 다시 Tri-gram으로 나누어 분류의 기본단위로 본다. 이 Tri-gram을 토픽 시그너처를 이용한 학습 단위로 사용하고, 학습한 자질을 베이지안(Bayesian) 모델을 사용하여 분류한다. 다양한 방법의 모델과 비교 실험을 통하여 구현한 시스템의 성능이 기존의 방법보다 상승되었음을 실험 결과를 통해 알 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.402-405
• /
• 2006

Radiometric calibration of optical image data is necessary to convert raw digital number (DN) value of each pixel into a physically meaningful measurement (radiance). To extract rather quantitative information regarding biophysical characteristics of the earth surface materials, radiometric calibration is often essential procedure. A sensor detects the radiation of sunlight interacted atmospheric constituents. Therefore, the amount of the energy reaching at the sensor is quite different from the initial amount reflected from the surface. To achieve the target reflectance after atmospheric correct, an initial step is to convert DN value to at-sensor radiance. A linear model, the simplest radiometric model, is applied to averaged spectral radiance for this conversion. This study purposes to analyze the sensitivity of several factors affecting on radiance for carrying out absolute radiometric calibration of panchromatic images from KOMPSAT2 launched at July, 2006. MODTRAN is used to calculate radiance at sensor and reflectance of target is measured by a portable spectro-radiometer at the same time the satellite is passing the target for the radiometric calibration. As using different contents of materials composing of atmosphere, the differences of radiance are investigated. Because the spectral sensitivity of panchromatic images of KOMPSAT2 ranges from 500 to 900 nm, the materials causing scattering in visible range are mainly considered to analyze the sensitivity. According to the verified sensitivity, direct measurement can be recommenced for absolute radiometric calibration.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권4호
• /
• pp.505-513
• /
• 2017

As mobile systems are performing various functionality in the IoT (Internet of Things) era, network-on-chip (NoC) plays a pivotal role to support communication between the tens and in the future potentially hundreds of interacting modules in system-on-chips (SoCs). Owing to intensive research efforts more than a decade, NoCs are now widely adopted in various SoC designs. Especially, studies on application-specific NoCs (ASNoCs) that consider the heterogeneous nature of modern SoCs contribute a significant share to use of NoCs in actual SoCs, i.e., ASNoC connects non-uniform processing units, memory, and other intellectual properties (IPs) using flexible router positions and communication paths. Although it is not difficult to find the prior works on ASNoC synthesis and optimization, little research has addressed the issues how to convert different protocols and data widths to make a NoC compatible with various IPs. Thus, in this paper, we address important issues on ASNoC implementation to support and convert multiple interfaces. Based on the in-depth discussions, we finally introduce our FPGA-proven full-custom ASNoC.

• 한국식품과학회지
• /
• 제24권6호
• /
• pp.586-591
• /
• 1992

대두유의 oligosaccharide를 분해할 수 있는 S. uvarum을 이용하여 L. acidophilus와 혼합배양을 행하여 당대사의 상호작용을 검토한 결과 대두유에 glucose, fructose, galactose 등의 단당류를 첨가하여 L. acidophilus 단독배양만으로도 높은 산생성을 보여주었으며 혼합배양의 경우도 단당류를 잘 이용하였다. Sucrose가 첨가된 배지에서의 L. acidophilus의 단독배양에서는 산생성이 낮았으나 혼합배양을 했을 때는 다른 단당류만큼 증가되었다. 배양시간에 다른 soywhey의 당변화를 검토한 결과 L. acidophilus 배양에서는 당변화가 거의 없었으나 S. uvarum은 sucrose, stachyose, raffinose와 같은 oligosaccharide를 분해하고 있어 혼합배양중 oligosaccharide로부터 분해된 단당류를 L. acidophilus가 젖산 발효에 이용하는 것으로 생각되었다.