• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.116-116
• /
• 2009

$TiO_2$ pastes was synthesized to obtained of high efficiency dye-sensitized solar cells using size dependent co-polymer. SBM co-polymer binder is consist of styrene, n-butyl acrylate, and methacrylic acid (SBM) monodisperse co-polymer binder materials and this $TiO_2$ pastes were applied of dye-sensitized solar cells (DSSCs). The photoanodes were characterized by ATR-Fourier Transform spectrometer, X-ray diffraction (XRD) and morphology was investigated by field emission scanning electron microscopy (FE-SEM). The photoelectrochemical properties of the thin films and the performance of DSSCs were measured by photovoltaic-current density, AC impedance and monochromatic incident photon-to-current conversion efficiency (IPCE). DSSC based on the 100nm size co-polymer binder was obtained conversion efficiency of 8.1% under irradiation of AM 1.5(100 $mWcm^2$).

• Clean Technology
• /
• v.24 no.1
• /
• pp.63-69
• /
• 2018

The reduction reaction characteristics and physicochemical properties were studied for the selection of oxygen carrier, which is the core of the chemical looping combustion (CLC) technology. Fuel conversion and $CO_2$ selectivity of oxygen carrier according to the concentration of reducing gas and the reduction temperature using three kinds of oxygen carrier (SDN70, N018-R2, N016-R4) were measured and compared. In addition, Attrition Index (AI) and BET surface area were measured to analyze the attrition resistance and the surface characteristics of the oxygen carrier. As a result, it was confirmed that all three kinds of oxygen carrier were suitable for use in chemical roofing combustion system, and the best particle was determined to be N016-R4.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.10
• /
• pp.787-793
• /
• 2015

In response to the growing interest in supercritical carbon dioxide ($S-CO_2$) power cycle technology because of its potential enhancement in compactness and efficiency, the $S-CO_2$ cycles have been studied intensively in the fields of nuclear power, concentrated solar power (CSP), and fossil fuel power generation. Despite this interest, there are relatively few studies on waste heat recovery applications. In this study, the $S-CO_2$ cycle that has a split flow with preheating was modeled and simulated. The variation in the power was investigated with respect to the changes in the value of a design parameter. Under the simulation conditions considered in this study, it was confirmed that the design parameter has an optimal value that can maximize the power in the $S-CO_2$ power cycle that has a split flow with preheating.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.347-354
• /
• 2013

This study was carried out to examine different mole ratio of $H_2/CO_2$ and EBCT using the continuous system in the lab scale throughout biological methods with accumulated hydrogenotrophic methanogen that can convert $CO_2$ to $CH_4$. The experimental-based results with various gas mixtures of mole ratio of 4:1($H_2/CO_2$) and 5:1($H_2/CO_2$), $H_2$ was converted more than 99% conversion rate. In case of $CO_2$, 4:1($H_2/CO_2$) and 5:1($H_2/CO_2$) were $74.45{\pm}0.33%$, $95.8{\pm}10.7%$, respectively, in addition, the study was confirmed that the amount of $H_2$ was more needed than stoichiometric equations, where approach methods are empirical versus theoretical frameworks, for converting total $CO_2$. As such, we have noticed that $H_2$ was used for energy source of hydrogenotrophic methanogen for maintaining life. Regarding the results of the ratio of treatment by retention time, limitation of treatment capacity showed that $H_2$(99.9%) and $CO_2$(96.23%) at EBCT 3.3 hrs indicated stable conversion ratio, as well as appeared that methane production rate and $CO_2$ fixation rate were investigated $1.15{\pm}0.02m^3{\cdot}m^{-3}{\cdot}day^{-1}$ and $2.01{\pm}0.04kg{\cdot}m^{-3}{\cdot}day^{-1}$, respectively.

• Tuberculosis and Respiratory Diseases
• /
• v.86 no.2
• /
• pp.142-149
• /
• 2023

Background: Coronavirus disease 2019 (COVID-19) is an ongoing global public health threat and different variants of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have been identified. This study aimed to analyse the factors associated with negative conversion of polymerase chain reaction (PCR) and prognosis in critically ill patients according to the SARS-CoV-2 variant. Methods: This study retrospectively analysed 259 critically ill patients with COVID-19 who were admitted to the intensive care unit of a tertiary medical center between January 2020 and May 2022. The Charlson comorbidity index (CCI) was used to evaluate comorbidity, and a negative PCR test result within 2 weeks was used to define negative PCR conversion. The cases were divided into the following three variant groups, according to the documented variant of SARS-CoV-2 at the time of diagnosis: non-Delta (January 20, 2020-July 6, 2021), Delta (July 7, 2021- January 1, 2022), and Omicron (January 30, 2022-April 24, 2022). Results: The mean age of the 259 patients was 67.1 years and 93 (35.9%) patients were female. Fifty (19.3%) patients were smokers, and 50 (19.3%) patients were vaccinated. The CCI (hazard ratio [HR], 1.555; p<0.001), vaccination (HR, 0.492; p=0.033), and Delta variant (HR, 2.469; p=0.002) were significant factors for in-hospital mortality. The Delta variant (odds ratio, 0.288; p=0.003) was associated with fewer negative PCR conversion; however, vaccination (p=0.163) and remdesivir (p=0.124) treatments did not. Conclusion: The Delta variant of SARS-CoV-2 is associated with lower survival and negative PCR conversion. Contrary to expectations, vaccination and remdesivir may not affect negative PCR conversion in critically ill patients with COVID-19.

• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.27 no.3
• /
• pp.292-300
• /
• 2023

Backgrounds/Aims: Current literature presents limited data regarding outcomes following conversion at the time of minimally invasive pancreaticoduodenectomy (MI-PD). Methods: The National Cancer Database was queried for patients who underwent pancreaticoduodenectomy. Patients were stratified into three groups: MI-PD, converted to open pancreaticoduodenectomy (CO-PD), and open pancreaticoduodenectomy (O-PD). Multivariable modeling was applied to compare outcomes of MI-PD and CO-PD to those of O-PD. Results: Of 17,570 patients identified, 12.5%, 4.2%, and 83.4% underwent MI-PD, CO-PD, and O-PD, respectively. Robotic pancreaticoduodenectomy (R-PD) resulted in a higher lymph node yield (n = 23.2 ± 12.2) even when requiring conversion (n = 22.4 ± 13.2, p < 0.001). Margin positivity was higher in the CO-PD group (26.6%) than in the MI-PD group (21.3%) and the O-PD (22.6%) group (p = 0.017). Length of stay was shorter in the MI-PD group (laparoscopic pancreaticoduodenectomy 10.4 ± 8.6, R-PD 10.6 ± 8.8) and the robotic converted to open group (10.7 ± 6.4) than in the laparoscopic converted to open group (11.2 ± 9) and the O-PD group (11.5 ± 8.9) (p < 0.001). After adjusting for patient and tumor characteristics, both MI-PD (odds ratio = 1.40; p < 0.001) and CO-PD (odds ratio = 1.24; p = 0.020) were significantly associated with an increased likelihood of long-term survival. Conclusions: CO-PD does not negatively impact perioperative or oncologic outcomes.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.200-203
• /
• 2008

The objective of this study is to produce the $CO_2$ (carbon dioxide) absorption map using KOMPSAT-2 imagery. For estimating the amount of $CO_2$ absorption, the stand biomass of forest was estimated with the total weight, which was the sum of individual tree weight. Individual tree volumes could be estimated by the crown width extracted from KOMPSAT-2 imagery. In particular, the carbon conversion index and the ratio of the $CO_2$ molecular weight to the C atomic weight, reported in the IPCC (Intergovernmental Panel on Climate Change) guideline, was used to convert the stand biomass into the amount of $CO_2$ absorption. Thereafter, the KOMPSAT-2 imagery was classified with the SBC (segment based classification) method in order to quantify $CO_2$ absorption by tree species. As a result, the map of $CO_2$ absorption was produced and the amount of $CO_2$ absorption was estimated by tree species.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.398-406
• /
• 2022

To satisfy the growing demand for high-performance batteries, diverse novel anode materials with high specific capacities have been developed to replace commercial graphite. Among them, cobalt hydroxides have received considerable attention as promising anode materials for lithium-ion batteries as they exhibit a high reversible capacity owing to the additional reaction of LiOH, followed by conversion reaction. In this study, we introduced graphene in the fabrication of Co(OH)₂-based anode materials to further improve electrochemical performance. The resultant Co(OH)₂/graphene composite exhibited a larger reversible capacity of ~1090 mAh g^-1, compared with ~705 mAh g^-1 for bare Co(OH)₂. Synchrotron-based analyses were conducted to explore the beneficial effects of graphene on the composite material. The experimental results demonstrate that introducing graphene into Co(OH)₂ facilitates both the conversion and reaction of the LiOH phase and provides additional lithium storage sites. In addition to insights into how the electrochemical performance of composite materials can be improved, this study also provides an effective strategy for designing composite materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.70-70
• /
• 2013

As the costs of carbon-footprinetd fuels grow continuously and simultaneously atmospheric carbon dioxide concentration increases, solar fuels are receiving growing attention as alternative clean energy carriers. These fuels include molecular hydrogen and hydrogen peroxide produced from water, and hydrocarbons converted from carbon dioxide. For high efficiency solar fuel production, not only light absorbers (oxide semiconductors, Si, inorganic complexes, etc) should absorb most sunlight, but also charge separation and interfacial charge transfers need to occur efficiently. With this in mind, this talk will introduce the fundamentals of solar fuel production and artificial photosynthesis, and then discuss in detail on photoelectrochemical (PEC) water splitting and CO2 conversion. This talk largely divides into two section: PEC water oxidation and PEC CO2 reduction. The former is very important for proton-coupled electron transfer to CO2. For this oxidation, a variety of oxide semiconductors have been tested including TiO2, ZnO, WO3, BiVO4, and Fe2O3. Although they are essentially capable of oxidizing water into molecular oxygen, the efficiency is very low primarily because of high overpotentials and slow kinetics. This challenge has been overcome by coupling with oxygen evolving catalysts (OECs) and/or doping donor elements. In the latter, surface-modified p-Si electrodes are fabricated to absorb visible light and catalyze the CO2 reduction. For modification, metal nanoparticles are electrodeposited on the p-Si and their PEC performance is compared.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.544-552
• /
• 2014

In this study, We have investigated the kinetics on the char-$CO_2$ gasification reaction. Thermogravimetric analysis (TGA) experiments were carried out for char-$CO_2$ catalytic gasification of an Indonesian Roto lignite. $Na_2CO_3$, $K_2CO_3$, $CaCO_3$ and dolomite were selected as catalyst which was physical mixed with coal. The char-$CO_2$ gasification reaction showed rapid an increase of carbon conversion rate at 60 vol% $CO_2$ and 7 wt% $Na_2CO_3$ mixed with coal. At the isothermal conditions range from $750^{\circ}C$ to $900^{\circ}C$, the carbon conversion rates increased as the temperature increased. Three kinetic models for gas-solid reaction including the shrinking core model (SCM), volumetric reaction model (VRM) and modified volumetric reaction model (MVRM) were applied to the experimental data against the measured kinetic data. The gasification kinetics were suitably described by the MVRM model for the Roto lignite. The activation energies for each char mixed with $Na_2CO_3$ and $K_2CO_3$ were found a 67.03~77.09 kJ/mol and 53.14~67.99 kJ/mol.