• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.944-950
• /
• 1993

Diodes and GaAs have been commonly used in a mixer design until recently. However, diodes are not preferred to use at the front-end of DBS receiver due to the conversion loss large noise. HEMT has larger conversion gain and better noise characteristics comparing with GaAs MESFET. This paper describes the design procedure, structure, and performance of a mixer, utilizaing HEMT designed by OKI Co. . A mixer configuration in which the local oscillator(LO) signal is applied to the gate is used. When the LO power is 0.01 dBm, the conversion gain of 3.7dB is obtained at IF and the 3 dB bandwidth is 400MMz.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.275-279
• /
• 2012

(3-mercaptopropyl)trimethoxysilane (MPTMS) was used as a silylation agent, and modified silica nanoparticles were prepared by solution polymerization. 2.0 g of silica nanoparticles, 150 ml of toluene, and 20 ml of MPTMS were put into a 300 ml flask, and these mixtures were dispersed with ultrasonic vibration for 60 min. 0.2 g of hydroquinone as an inhibitor and 1 to 2 drops of 2,6-dimethylpyridine as a catalyst were added into the mixture. The mixture was then stirred with a magnetic stirrer for 8 hrs. at room temperature. After the reaction, the mixture was centrifuged for 1 hr. at 6000rpm. After precipitation, 150 ml of ethanol was added, and ultrasonic vibration was applied for 30 min. After the ultrasonic vibration, centrifugation was carried out again for 1 hr. at 6000rpm. Organo-modification of silica nanoparticles with a ${\gamma}$-methacryloxypropyl functional group was successfully achieved by solution polymerization in the ethanol solution. The characteristics of the ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) were examined using X-ray photoelectron spectroscopy (XPS, THERMO VG SCIENTIFIC, MultiLab 2000), a laser scattering system (LSS, TOPCON Co., GLS-1000), Fourier transform infrared spectroscopy (FTIR, JASCO INTERNATIONL CO., FT/IR-4200), scanning electron microscopy (SEM, HITACHI, S-2400), an elemental analysis (EA, Elementar, Vario macro/micro) and a thermogravimetric analysis (TGA, Perkin Elmer, TGA 7, Pyris 1). From the analysis results, the content of the methacryloxypropyl group was 0.98 mmol/g and the conversion rate of acrylamide monomer was 93%. SEM analysis results showed that the organo-modification of ultra-fine particles effectively prevented their agglomeration and improved their dispensability.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.3
• /
• pp.223-230
• /
• 2014

This study was performed to enhance contents of low molecular ginsenoside using steaming and fermentation process in low quality fresh ginseng. For increase in contents of Rg2, Rg3, Rh2 and CK in low quality fresh ginseng, a steaming process was applied at $90^{\circ}C$ for 12 hr which was followed by fermentation process at Lactobacillus rhamnosus HK-9 incubated at $36^{\circ}C$ for 72 h. The contents of ginsenoside Rg1, Rb1, Rc, Re and Rd were decreased with the steaming associated with fermentation process but ginsenoside Rg2, Rg3, Rh2 and CK increased after process. It was found that under the steaming associated with fermentation process, low molecule ginsenosides such as Rg2, Rg3, Rh2 and CK were increased as 3.231 mg/g, 2.585 mg/g and 1.955 m/g and 2.478 mg/g, respectively. In addition, concentration of benzo[${\alpha}$]pyrene in extracts of the low quality fresh ginseng treated by the complex process was 0.11 ppm but it was 0.22 ppm when it was treated with the steaming process. This result could be caused by that the most efficiently breakdown of 1,2-glucoside and 1,4-glucoside linkage to backbone of ginsenosides by steaming associated with fermentation process. This results indicate that steaming process and fermenration process can increase in contents of Rg2, Rg3, Rh2 and CK in low quality fresh ginseng.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2006

This study investigated the optimal conditions of high yield production of cyclofructan (CF) using recombinant deletion mutant enzyme CFT108 which is constructed by N-terminal deletion from cycloinulooligosaccharide fructanotransferase (CFTase) gene of Penibacillus polymyxa. The production yield was dependent on reaction time, substrate concentration and enzyme concentration. The optimum reaction time for industrial purpose was achieved at 3 hr reaction. The optimal concentrations of substrate and enzyme were found to be $2\%$ inulin and 40 unit/ g inulin, respectively. At optimum condition, 9.5 g/l of maximum yield and $47.5\%$ of conversion efficacy were achieved. For purification of CF produced, the reaction mixture was treated with 1 unit/ml exoinulinase and then added $3\%$ CaO three times with blowing $CO_2$ gas, resulted in $95\%$ purity.

• Animal cells and systems
• /
• v.10 no.4
• /
• pp.211-217
• /
• 2006

Heavy metals are well known as important environmental pollutants and also considered as endocrine disrupters. This study was performed to evaluate the direct effects of heavy metals such as cadmium (Cd), zinc (Zn), mercury (Hg), lead (Pb), cobalt (Co), and arsenic (As) on the various steroidogenic enzymes in frog ovarian follicles. Ovarian follicles from Rana catesbeiana were isolated and cultured for 18 hours in the presence of frog pituitary homogenate (FPH, 0.05 gland/ml) or various steroid precursors with or without heavy metals (0.01-100 ${\mu}M$), and steroid levels in the follicle or culture medium were measured by radioimmunoassay (RIA). Thus, the steroidogenic enzyme activities were indirectly evaluated by measuring the converted steroid levels from the added precursor steroid. Among heavy metals, Hg, Cd and Zn significantly inhibited FPH-induced pregnenolone ($P_5$) production by the follicles ($EC_{50},\;4.0{\mu}M,\;25.6{\mu}M\;and\;5.7{\mu}M$, respectively ), and also suppressed the conversion of testosterone (T) to estradiol $17{beta}\;(E_2)\;(EC_{50},\;4.2{\mu}M,\;7.5{\mu}M\;and\;80.0{\mu}M) while Pb, Co and As are not or less effective in the inhibition. Other enzymes such as $C_{17-20}$ lyase and $17{\beta}$-hydroxysteroid dehydrogenase ($17{\beta}$-HSD) were suppressed only in the high concentration of Hg, Cd and Zn. Taken together, these data demonstrate that cytochrome P450 side chain cleavage (P450scc) and aromatase are much more sensitive to heavy metals than other steroidogenic enzymes and Hg, Cd and Zn show stronger toxicity to follicles than other heavy metals examined.

• Korean Journal of Agricultural Science
• /
• v.45 no.3
• /
• pp.401-409
• /
• 2018

A total of 459 broiler chicks were studied from 1 to 32 days of age to evaluate the effect of phytase diet supplementation on their growth performance, nutrient digestibility, and meat quality. Chicks were randomly divided into 3 treatments (9 replicates/treatment, 17 chicks/replicate). This was a 32 day experiment that included 2 phases: phase 1, grower (0 to 17 day); and phase 2, finisher (17 to 32 day). Dietary treatments were: T1, control basal diet (CON); T2, CON + 0.01% phytase (300 IU); and, T3, CON + 0.01% phytase (500 IU). Results showed that supplementation of the basal diet with phytase increased pH value of meat. During the period between day 7 and 17 of the study, T2 and T3 groups had higher body weight gain (BWG) than T1 group. After phase 2 and the use of finisher feed, T3 group had significantly improved BWG and feed intake (FI). During the whole experiment, T3 resulted in higher BWG and FI than other treatments. But feed conversion ratio was not affected by phytase supplementation throughout the experiment. Both T2 and T3 groups had significantly higher apparent total tract digestibility of dry matter when compared with T1. However, no differences were observed for Nitrogen, Ca, and P during the experiment. In conclusion, supplementation of phytase increased BW, FI, and apparent total tract digestibility (ATTD) of dry matter (DM). However, there was no significant influence in feed conversion ratio (FCR), relative organ weight and breast muscle quality.

• Clean Technology
• /
• v.26 no.4
• /
• pp.257-262
• /
• 2020

Two-dimensional (2D) metal organic framework (MOF) nanosheets (NSs) have recently gained considerable interest owing to their structural advantages, such as large surface area and exposed active sites. Two different types of 2D MOF NSs have been reported, including inherently layered MOFs and non-layered ones. Although several studies on inherently layered 2D MOFs have been reported, non-layered 2D MOFs have been rarely studied. This may be because the non-layered MOFs have a strong preference to form three-dimensionality intrinsically. Furthermore, the non-layered MOFs are typically synthesized in the presence of the surfactant or modulator, and thus developing facile and clean synthetic routes is highly pursued. In this study, a facile and clean synthetic methodology to grow non-layered 2D cobalt-based zeolitic imidazolate framework (ZIF-67) NSs is suggested, without using any surfactant and modulator at room temperature. This is achieved by directly converting ultrathin α-Co(OH)2 layered hydroxide salt (LHS) NSs into non-layered 2D ZIF-67 NSs. The comprehensive characterizations were conducted to elucidate the conversion mechanism, structural information, thermal stability, and chemical composition of the non-layered 2D ZIF-67. This facile and clean approach could produce a variety of non-layered 2D MOF NS families to extend potential applications of MOF materials.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.849-853
• /
• 2002

Metal ions have an adverse effect on anaerobic digestion. In an acetate degradation test of upflow of anaerobic sludge blanket granules with $Cu^{2+}$, not all of the acetate that disappeared was stoichiometrically converted to methane. In the presence of 400 mg/g-VSS (volatile suspended solids) $Cu^{2+}$, only 26% of the acetate consumed was converted to methane. To study acetate conversion by other anaerobic microorganisms, sulfate and nitrate reductions were investigated in the presence of $Cu^{2+}$ Sulfate and nitrate reductions exhibited more resistance to $Cu^{2+}$than methanogenesis, and the granules reduced 2.2 mM and 5.4 mM of nitrate and sulfate, respectively, in the presence of 400 mg/g-VSS copper ion. However, the acetate degraded by sulfate and nitrate reductions was only 24% of the missing acetate that could have been stoichiometrically converted to $CO_2$. Accordingly, 76% of the acetate consumed appeared to have been converted to other unknown compounds.

• Journal of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.53-64
• /
• 1975

The polymerization of methyl methacrylate initiated by cobalt(II) chloride in tetrahydrofuran has been studied. The conversion was increased liearly with polymerization time at initial stage of 6${\sim}$7% conversion and then the rate of polymerization was slightly reduced, and after that the autoacceleration was observed. The rate of polymerization was increased with the concentration of cobalt(Ⅱ) chloride, but at the concentration of cobalt(II) chloride higher than $3.4{\times}10^{-4}$ mole/l the rate of polymerization was decreased. The rate of polymerization was dependent on the 1.38 power of the concentration of methyl methacrylate. The effect of the radical inhibitor DPPH was observed and the inhibition time was increased with the concentration of DPPH. The apparent overall activation energy was calculated to be 13.2 kcal/mole. In the copolymerization of methyl methacrylate ($M_1$) and styrene ($M_2$), the monomer reactivity ratio was found to be $r_1$ = 2.35, $r_2$ = 0.78. From the above results. the initiation mechanism of polymerization was discussed and it was considered that the polymerization proceeds mainly via diradical mechaism.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.260-266
• /
• 2012

Syngas and hydrogen from the $CeO_2/ZrO_2$ coated foam devices were investigated under simulated solar radiation. The $CeO_2/ZrO_2$ coated SiC, Ni and Cu foam device were prepared using drop-coating method. Syngas production step was performed at $900^{\circ}C$, and hydrogen production process was performed for ten repeated cycles to compare the CeO2 conversion in syngas production step, $H_2$ yield in hydrogen production step and cycle reproducibility. The produced syngas had the $H_2$/CO ratio of 2, which was suitable for methanol synthesis or Fischer-Tropsch synthesis process. In addition, syngas and hydrogen production process is one of the promising chemical pathway for storage and transportation of solar heat by converting solar energy to chemical energy. After ten cycles of redox reaction, the $CeO_2/ZrO_2$ was analyzed using XRD pattern and SEM image in order to characterize the physical and chemical change of metal oxide at the high temperature.