• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.39-44
• /
• 2015

$Cu(In,Ga)_3Se_5$ (${\beta}-CIGS$) has a band gap of 1.35 eV which is an optimum value for high solar-energy conversion efficiency. However, ${\beta}-CIGS$ film was not well characterized yet due to lower efficiency compared to $Cu(In,Ga)Se_2$ (${\alpha}-CIGS$). In this work, ${\beta}-CIGS$ films were fabricated by a three-stage co-evaporation of elemental sources with various Se fluxes. As the Se flux increased, the crystallinity of ${\beta}-CIGS$ phase was improved from the analysis of Raman spectroscopy and a deep-level defect was reduced from the analysis of photoluminescence spectroscopy. A Se treatment of the ${\beta}-CIGS$ film at $200^{\circ}C$ increased Ga content and decreased Cu content at the surface of the film. With the Se treatment at $200^{\circ}C$, the cell efficiency was greatly improved for the CIGS films prepared with low Se flux due to the increase of short-circuit current and fill factor. It was found that the main reason of performance improvement was lower Cu content at the surface instead of higher Ga content.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.2
• /
• pp.128-136
• /
• 2016

BACKGROUND: Hydrothermal carbonization reaction is the thermo-chemical energy conversion technology for producing the solid fuel of high carbon density from organic wastes. The hydrothermal carbonization reaction is accompanied by the thermal hydrolysis reaction which converse particulate organic matters to soluble forms (hydro-thermal hydrolysate). Recently, hydrothermal carbonization is adopted as a pre-treatment technology to improve anaerobic digestion efficiency. This research was carried out to assess the effects of hydro-thermal reaction temperature on the methane potential and anaerobic biodegradability in the thermal hydrolysate of organic sludge generating from the wastewater treatment plant of poultry slaughterhouse .METHODS AND RESULTS: Wastewater treatment sludge cake of poultry slaughterhouse was treated in the different hydro-thermal reaction temperature of 170, 180, 190, 200, and 220℃. Theoretical and experimental methane potential for each hydro-thermal hydrolysate were measured. Then, the organic substance fractions of hydro-thermal hydrolysate were characterized by the optimization of the parallel first order kinetics model. The increase of hydro-thermal reaction temperature from 170℃ to 220℃ caused the enhancement of hydrolysis efficiency. And the methane potential showed the maximum value of 0.381 Nm³ kg^-1-VS_added in the hydro-thermal reaction temperature of 190℃. Biodegradable volatile solid(VSB) content have accounted for 66.41% in 170℃, 72.70% in 180℃, 79.78% in 190℃, 67.05% in 200℃, and 70.31% in 220℃, respectively. The persistent VS content increased with hydro-thermal reaction temperature, which occupied 0.18% for 170℃, 2.96% for 180℃, 6.32% for 190℃, 17.52% for 200℃, and 20.55% for 220℃.CONCLUSION: Biodegradable volatile solid showed the highest amount in the hydro-thermal reaction temperature of 190℃, and then, the optimum hydro-thermal reaction temperature for organic sludge was assessed as 190℃ in the aspect of the methane production. The rise of hydro-thermal reaction temperature caused increase of persistent organic matter content.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.82-90
• /
• 2011

The small precision spindle motors in the high value-added products including the visible home appliances such as DLP projector require not only the energy conversion devices but also high efficiency, low vibration and sound operation. However, the spindle motors using the conventional ball bearing and sintered porous metal bearing have following problems, respectively: the vibration by the irregularity of balls and the short motor life cycle by the ball's abrasion and higher sound noises by dry contact between shaft and sleeve. In this paper, it is proposed that the spindle motor with a fluid dynamic bearing is suitable for the motor to drive the color wheel of the DLP(digital lightening processor) in the visible home appliances. The proposed spindle motor is composed of the fluid dynamic bearing with both the radial force and the thrust force. The fluid dynamic bearing is solved by the finite element analysis of the mechanical field with the Reynolds equations. The magnetic part of spindle motor, which is a type of Brushless DC Motor, is designed by the electro-magnetic field analysis coupled with the Maxwell equation. And the load capacity and the friction loss of fluid dynamic bearing are analyzed to bearing clearance variation by the fabrication error in designed motor. The design of the proposed motor is implemented by the load torque caused by the eccentricity and the unbalance of the fluid dynamic bearing when the motors are fabricated in error. The prototype of the motor with the fluid dynamic bearing is manufactured, and experiment results show the vibration, sound, and phase current at no load and color wheel load of the motors in comparison. The high performance characteristics with the low vibration, the low acoustic noise and the optimal mechanical structure are verified by the experimental results.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.4
• /
• pp.86-95
• /
• 2002

Anaerobic digestion of municipal solid waste(MSW) is recently getting attention due to energy generation and abatement of global warming. MSW has high solid content and low nitrogen content. Its major component is cellulose and hemicellulose. The conversion rate of organic portion of MSW to methane is approximately 50%, representing $0.2m^3/kg$ VS. Long hydraulic retention time is required for high solid content and inoculum should be mixed with the feed. When MSW is digested anaerobically, maximum limit of C/N ratio is 25 and the optimum concentration of $NH_3-N$ is 700mg/L. lime and sodium bicarbonate are used to adjust pH. Excess addition of sodium bicarbonate above 3,500mg/L will cause sodium toxicity. Thermophilic anaerobic digestion is effective in the control of pathogen although its operation and maintenance is difficult. To optimize the anaerobic digestion of MSW, it is necessary to understand the mechanism of microorganims involved in anaerobic digestion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1998

A total of 120 pigs $(L\;{\times}\;LW\;{\times}\;D)$ averaged 14.16 kg of body weight were reared under six dietary treatments to evaluate the effects of amino acid supplementation on their performances. Treatments were 1) 18% CP diet (control); 2) 15% CP+0.28% Lys (B, 15L); 3) B+0.06% Met (15LM); 4) B+0.13% Thr (15LT) ; 5) B+0.06% Met+0.13% Thr (15LMT); 6) B+0.06% Met+0.13% Thr+0.05% Trp (15LMTT). Each treatment had 4 replicates with 5 pigs per replicate. The daily weight gains were statistically similar in 15LMT, 15LMTT and control groups. Threonine and methionine supplementation resulted in improved growth performance and nutrient digestibilities, while tryptophan supplementation had little beneficial effect. However, the best feed conversion was found in the control group. Dry. matter and CP digestibilities were improved in the 15LMT and 15LMTT groups. Gross energy, crude fat and phosphorus digestibilities were not affected by the treatment. Among the 15% CP groups, nitrogen digestibility showed the tendency to be increased as the more synthetic amino acids were added. Dry matter and nitrogen excretions were significantly reduced by feeding low protein, amino acid fortified diets, while phosphorus excretion was not influenced. Essential amino acids digestibility was higher in 15LT, 15LMT and 15LMTT groups and lower in the control. The 15LT group showed the best lysine digestibility, and methionine digestibilities were higher in all treated groups than control one. Threonine digestibilities higher in 15LT 15LMT, and 15LMTT than the control. The result shows that threonine and methionine should be added to the diet containing 15% CP diet, fortified with lysine to get same performance of 18% CP diet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.10
• /
• pp.1440-1444
• /
• 2000

Two feeding trials were conducted to evaluate the effects of inclusion levels of dietary vitamin and trace mineral (VTM) premixes on growth and nutrient digestibility in growing pigs. A total of 112 pigs ($24.82{\pm}3.22kg$) were employed for 49 days (exp. 1), and 168 pigs ($21.64{\pm}1.41kg$) for 40 days (exp. 2) in completely randomized block designs. Treatments were: 1) 100%, 2) 150%, 3) 200% and 4) 250% NRC (1998) requirement of VTM in exp. 1, and the ratio of vitamins to trace minerals at 1) 100:100%, 2) 100:150%, 3) 150:100% and 4) 150:150% of NRC (1998) requirement in exp. 2. Basal diets for feeding trials were formulated to contain 3,310 kcal ME/kg and 18% crude protein, and contained 0.25% chromic oxide as an indigestible marker for digestibility trials. Increasing dietary VTM premix in growing pigs had linear and quadratic effects (p<0.05) on ADG, and feed conversion ratio was also improved (p<0.05) as VTM premix was increased by 150-250% of NRC (1998) requirements in exp. 1. Adding vitamin to trace mineral premixes at 150% NRC (1998) over the control improved (p<0.05) ADG and feed efficiency in growing pigs, but performances were not improved by vitamin nor by trace mineral premixes alone (p>0.15) (exp. 2). There were no differences (p>0.05) in the digestibilities of energy, crude protein and fat among dietary treatments. However, increasing dietary VTM premix in growing pigs had a linear effect (p<0.05) on the digestibilities of calcium and phosphorus. The 200 or 250% fed group showed improved (p<0.05) calcium digestibility, and 250% fed group also showed improved (p<0.05) phosphorus digestibility as compared to 100% or 150% fed group (exp. 1). The digestibilities of Ca and P were higher (p<0.05) in 150% addition of vitamins than in 150% addition of trace minerals in the diet (exp. 2).

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.7
• /
• pp.1115-1119
• /
• 2007

This study was conducted to determine the difference between satellite cells (porcine) and myoblasts (C2C12) in their differentiation under the influence of 2, 4-thiazolidindion. C2C12 myoblast cells and porcine satellite cells (isolated from 10 d old $Landrace{\times}Duroc$ piglets) were grown to absolute confluency. Post confluent cells (day 0) were further exposed to adipogenic induction medium along with 2, 4-thiazolidindion ($8{\mu}M$) for 2 d. Thereafter, cells were exposed to 2, 4-thiazolidindion alone every 2 d till day 10 and analysed. The control was cultured in differentiation medium without any treatment. Increased (p<0.05) expression of transcriptional factors i.e. C/EBP-${\alpha}$ and PPAR-${\gamma}$ and transition of cells to adipocyte morphology was noticed from 2 d and 4 d onwards in satellite cells (Porcine) and myoblasts (C2C12) respectively. Myogenesis was observed to be suppressed completely in case of satellite cells compared to myoblasts in response to 2, 4-thiazolidindion. Pax-7 (transcriptional factor) appeared as a sole entity to satellite cells only, as it was not identified in case of myoblasts. Although both the cells were converting to adipoblasts, the degree of their conversion was different in response to 2, 4-thiazolidindion. Therefore, the hypothesis that satellite cells contribute various domains to the growing myoblasts appeared obscured and found to be dependent on the proliferative energy/or degree of fusion. However, it revealed satellite cells as currency to myoblasts/muscle.

• Environmental Engineering Research
• /
• v.16 no.2
• /
• pp.81-90
• /
• 2011

Different weight percentages of Ag, Pt, and Au doped nano $TiO_2$ were synthesized using the acetic acid hydrolyzed sol-gel method. The crystallite phase, surface morphology combined with elemental composition and light absorption properties of the doped nano $TiO_2$ were comprehensively examined using X-ray diffraction (XRD), $N_2$ sorption analysis, transmission electron microscopic (TEM), energy dispersive X-ray, and DRS UV-vis analysis. The doping of noble metals stabilized the anatase phase, without conversion to rutile phase. The formation of gold nano particles in Au doped nano $TiO_2$ was confirmed from the XRD patterns for gold. The specific surface area was found to be in the range 50 to 85 $m^2$/g. TEM images confirmed the formation a hexagonal plate like morphology of nano $TiO_2$. The photocatalytic activity of doped nano $TiO_2$ was evaluated using 4-chlorophenol as the model pollutant. Au doped (0.5 wt %) nano $TiO_2$ was found to exhibit higher photocatalytic activity than the other noble metal doped nano $TiO_2$, pure nano $TiO_2$ and commercial $TiO_2$ (Degussa P-25). This enhanced photocatalytic activity was due to the cathodic influence of gold in suppressing the electron-hole recombination during the reaction.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.77-97
• /
• 2005

Organic light-emitting diodes(OLEDs) have received considerable attention since they were first reported by Tang. Novel organic fluorescent materials have been reported on synthesis and application of new organic light-emitting materials. Despite of much recent progress, fabrication of full-color OLEDs still remained to be done. Many method have been proposed to full-color OLEDs displays such as using separated red, green and blue emitters, stacking separate rad, green and blue emitter, using a white emitter with individually pattered color filters, microcavity structures and using a blue emitter with individually patterned fluorescent materials. The last method has much attention because of easy fabrication of OLEDs and low-priced fabrication. This paper reports the optical and electrical characteristics of OLEDs using novel molecules containing biphenyl structure. Optical properties of biphenyl derivatives doped with poly(9-vinyl carbazole)(PVK) are measured and found Forster energy transfer process in the blends. And devices were fabricated as ITO/PEDOT/PVK doped with biphenyl derivatives/$Alq_3$/Li:Al and I-V-L characteristics and EL efficiency of devices were examined.

• Journal of Animal Science and Technology
• /
• v.58 no.3
• /
• pp.12.1-12.7
• /
• 2016

Background: The objective of this experiment was to investigate the effects of dietary supplementation of rice bran oil (RBO) on growth performance, blood parameter, and immune response in broiler chickens. Methods: A total of 240 1-d-old ROSS 308 male broilers were randomly allotted to 4 dietary treatments with six replicated pens consisting of ten chicks. The basal diet was formulated to be adequate in energy and nutrients. Three additional diets were prepared by adding 5, 10 or 20 g/kg of RBO to the basal diet. The experimental diets were fed on an ad libitum basis to the birds during 35 d. Results: Results indicated that increasing inclusion level of RBO in diets improved BW gain (linear and quadratic, P < 0.01), improve feed conversion ratio (linear, P < 0.05) of birds during 0 to 35 d. There was no effect of inclusion level of RBO in diets on feed intake of birds. There was no effect of inclusion level of RBO in diets on erythrocytes of birds. However, heterophil, lymphocyte, and monocytes increased (linear and quadratic, P < 0.01) with inclusion level of RBO in diets increased. Feeding the diets containing increasing amount of RBO to birds increased (linear, P < 0.01) the concentrations of total cholesterol. Increasing inclusion level of RBO in diets increased concentrations of IgG (linear, P < 0.01). There was no effect of inclusion level of RBO in diets on concentrations of IgM. Conclusions: These results suggest that dietary RBO may be used functional ingredient to improve growth performance, total cholesterol in serum, and immune response of birds.