• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.667-673
• /
• 2000

A number of issues related with the vibrational behavior of pretwisted rotating beams featuring anisotropic properties and incorporating adaptive capabilities are considered in this paper. The adaptive capabilities are provided by a system of piezoactuators bonded or embedded into the structure. Based on the converse piezoelectric effect and on the out of phase activation, boundary control moments are pizoelectrically induced at the beam tip. A feedback control law relating the induced bending moments with the kinematical response quantities appropriately selected is used, and its beneficial effects, considered in conjunction with that of the beam anisotropy and structural pretwist upon the eigenvibration characteristics are highlighted

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.2
• /
• pp.561-568
• /
• 2016

In this paper, the effect of absolute values on the behavior of functions f in the spaces $\mathcal{Q}_K$ is investigated. It is clear that $g{\in}\mathcal{Q}_K({\partial}{\mathbb{D}}){\Rightarrow}{\mid}g{\mid}{\in}\mathcal{Q}_K({\partial}{\mathbb{D}})$, but the converse is not always true. For f in the Hardy space $H^2$, we give a condition involving the modulus of the function only, such that the condition together with ${\mid}f{\mid}{\in}\mathcal{Q}_K({\partial}{\mathbb{D}})$ is equivalent to $f{\in}\mathcal{Q}_K$. As an application, a new criterion for inner-outer factorisation of $\mathcal{Q}_K$ spaces is given. These results are also new for $Q_p$ spaces.

• Structural Engineering and Mechanics
• /
• v.19 no.5
• /
• pp.477-501
• /
• 2005

In this study, a new smart beam finite element is proposed for the finite element modeling of beam-type smart structures that are equipped with bonded plate-type piezoelectric sensors and actuators. Constitutive equations for the direct piezoelectric effect and converse piezoelectric effect of piezoelectric materials are considered in the formulation. By using a variational principle, the equations of motion for the smart beam finite element are derived. The proposed 2-node beam finite element is an isoparametric element based on Timoshenko beam theory. The proposed smart beam finite element is applied to the free vibration control adopting a constant gain feedback scheme. The electrical force vector, which is obtained in deriving an equation of motion, is the control force equivalent to that in existing literature. Validity of the proposed element is shown through comparing the analytical results of the verification examples with those of other previous researchers. With the use of smart beam finite elements, simulation of free vibration control is demonstrated by sensing the voltage of the piezoelectric sensors and by applying the voltages to the piezoelectric actuators.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.6
• /
• pp.1027-1031
• /
• 1994

A method for the process of making fig conserves to prevent the denaturation of ficin (EC3.422.3) that is a proteolytic enzyme in fig (Fixus carica L. ) has been developed. The suutable composition ratio of materials such as, fig, sugar, citric acid and potassium sorbate, to make fig conserves was 1,000, 600 , 1.0 and 0.67g , respectively. to maintain the ficin activity, it was necessary that these materials were heated on 55$^{\circ}C$ and concentrated in the reduced pressure. At a result of sensory evaluation , meat treated with fig was the softest among samples. Then the treated beef with 55$^{\circ}C$ converse, 7$0^{\circ}C$ conserves, sugar and control have been shown the decreased rate respectively. There was significantly different in the effect of tenderness between each group(0.1%) . The nitrogen content of connective tissue was relatively low in the groups of the treated beef with fig and 55$^{\circ}C$ converses, 7$0^{\circ}C$ converses sugar and control , which was similar to the order of the ficin activity. This research revealed that the constituent protein of meat muscle was decomposed by ficin and its solubility was relatively higher than before.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.2
• /
• pp.17-31
• /
• 1991

The effects of environmental agents on health are great concern for all. It was recognized that each human has differential susceptibility to environmental effects. Susceptibility are changed by many factors includin gdevelopmpntal processes, genetic factors, nutritional stratus, preexisting disease conditions, life style and personal habits. Of all factors nutritional factors seem to be the area most modifiable. Consequently, It is an area that must be more thoroughly evaluated. In this paper, nutrient and environment interactions are reviewed briefly with published literatures. This paper deals with the influence of micronutrients(energy, protein and fat), Vitamins (vitamin 4, vitamin B-complex, vitamin C, vitamin D and vitamin I) and Minerals(calcium, iron, selenium, zinc and other minerls) on environmental effects. The role of arch nutrient was assessed in modifyine the expression of environmental pollutant toxicity with available litertures. In each nutrient section, the effect of environment was considered in following agents : heavy metals(lead, cadmium, mercury, silver and etc), inorganic agents(nitwits, sulfite, fluoride and etc), organic agents(benzene, carbon tatra-chloride, aflatoxin, auto dye, dialbrin etc), Irritant gas(ozone, carbon monooxide and etc), physical agents(X-irradiation, ultra violet, temperature and noise) and insectcides. The extent to which nutritional status modifies environmental effects 3nd its converse, how envirollments affects nutritional status is very complex. In deed, at the present time there are more than 50 chelnical/phycical agents that affect the nutrient metabolism and/or have their toxicity either directly diminished or enhanced by nutrients of those agents, small number of agents for each nutrients have sufficient evidence to warrant any reasonable degree of confidence in their hypothesized associtation. With these information at this present time it is hard to conclude that the recommended dietary allowance for each nutrient should be reconsidered.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2050-2052
• /
• 2000

In this paper, the effect of $O_2$ concentration on NO removal and $NO_2$ generation by corona discharge from simulated flue gas was measured and estimated for the wire-plate reactor. $NO_2$ removal rate was 0$\sim$30[%] under about 3.4[%] of oxygen concentration, however, it was difficult to remove NOx over 3.4[%] of oxygen concentration. It may be due to generate $NO_2$ from $N_2$ and $O_2$ molecules and converse NO to $NO_2$ by 0 and $O_3$. Magnetic field applied to electric field in plasma was very effective for NOx removal under 2[%] of $O_2$ concentration.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.123-128
• /
• 2011

It has been stand high in estimation to converse from Carbon dioxide to Dimethyl Ether in new alternative fuel energy division in 21C, especially Using of DME in point of view of transportation fuel has been discussed of a new clean energy which is very lower of exhaust gas than gasoline and diesel energy. In this paper it is used ZSM-5 and I developed new catalyst by addition of cerium to control acidity. The new catalyst was proved high conversion rate, when it was conversed from methanol to DME, there wasn't any additional material except DME and water, and I overlooked reaction temperature, reaction time, amount of catalyst, amount of added cerium, effect of water content in methanol, reaction temperature by making change of reaction time. I have conclude that conversion rate to DME was increased as increased of catalyst amounts. The best catalyst condition of without additional product was treated poisoning from ZSM-5 to 5% cerium and new catalyst was not effected in purity of fuel methanol.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.2
• /
• pp.183-195
• /
• 2003

In this study, the method of the finite element modeling for free vibration control of beam-type smart structures with bonded plate-type piezoelectric sensors and actuators is proposed. Constitutive equations for the direct piezoelectric effect and converse piezoelectric effect of piezoelectric materials are considered. By using the variational principle, the equations of motion for the smart beam finite element are derived. The proposed 2-node beam finite element is an isoparametric element based on Timoshenko beam theory. Therefore, by analyzing beam-type smart structures with smart beam finite elements, it is possible to simulate the control of the structural behavior by applying voltages to piezoelectric actuators and monitoring of the structural behavior by sensing voltages of piezoelectric sensors. By using the smart beam finite element and constant-gain feed back control scheme, the formulation of the free nitration control for the beam structures with bonded plate-tyPe Piezoelectric sensors and actuators is proposed.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.103-114
• /
• 2016

The global trade partners have been diversified and mixed in agricultural market, which is expended the international agri-food market through the Regional Trade Agreement and World Trade Organization, etc. The aim of this study is to derive influential factors for exports increases of agricultural products targeting to Association of South-East Asian Nations (ASEAN). We set the equation for agricultural products exports referred to panel gravity model considering panel fixed effect for controlling endogeneity within variables. The results of this study are the follows; (1) Social economic distance considering international oil price negatively affects in the mushroom model; (2) Korean GDP affects (-) in a mushroom model and (+) in a vegetable model, however, ASEAN's per capita GDP indicates opposite influence in the same model; (3) Relative exchange rate shows negative impact in a vegetable model; (4) The entry status into WTO and the status in force of FTA have converse effects in mushroom and vegetable model, respectively.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.406-409
• /
• 2004

A blue phosphor(ZnS:Cu) is manufactured by solid state reaction for ACPEL(AC powder EL). The effect of artificial defect on phosphor surface on the ZnO phase conversion and resulting luminescence have been studied. It was found that ZnS:Cu could converse to cubic phase more easily due to the formation of artificial defect on 1st fired phosphor by ball-milling process, resulting in improvement of luminescence of phosphor phosphors under the driven EL condition. We found out an optimized ball-mill condition through considering effect of each ball-mill conditions such as milling time and milling rpm on defect. Also we determined relationship between emission luminescence and phase of phosphor based on analyses of crystal structures of phosphors. A significant improvement above 30% was observed in electroluminescence by the artificial defect on ZnS:Cu phosphors compared to non-treated phosphors.