• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.163-167
• /
• 2014

From Korea Elevator Safety Institute's report, the major accident factor of elevator is user's mistake, 60%. It means that the necessity of simple monitoring system. In this paper, we explain the standard of elevator safety check and the rate of accidents, then compare with old elevator managing system and new elevator managing system based on IOT technology. Also, we explain the reliability statistics of smart managing system based on expert's decision. Finally, we propose the smart managing system as the alternative method for decreasing the accident factor of elevator.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.622-622
• /
• 2013

Piezoelectric energy harvesting (PEH) device refers to a power device for acquiring mechanical energy from the environment surrounding us which would otherwise be wasted and for converting it into usable electrical energy. While much work has been done on developing ZnO nanogenerator (NG) with nanowire arrays, there are some issues of not only scaling up its output power but also optimizing structure for operating feasibly in various conditions. Efficiency of NG is highly dependent on fixed orientation. But in many cases, it is not easy to predict where the pressure and vibration may come from. Furthermore, the direction of the applied mechanical stress is usually non-stationary and can be random in various practical applications. Therefore an omnidirectional PEH is needed.In this work, we investigate an omnidirectional PEH device consisting ZnO nanowires. We deposited spiral patterned ZnO seed layer on Kapton film. We deposited thin Cr layer on the ZnO seed layer using DC-sputter to form a passivation layer to retard un-expected growth of ZnO nanowires. We grew ZnO nanowires along the spiral arms using hydrothermal method. ZnO nanowires have been selectively grown from the ZnO sidewall without Cr layer and have the average length of$5{\mu}m$ and the average diameter of 40nm. We reduced the defect in the as-grown ZnO nanowires by O2 plasma using asher and by thermal treatment using RTA. Consequently, each nanowire has different directions to each other. This isotropic design can lead to the omnidirectional power generation. The morphology of NG is characterized with FESEM. Maximum output power of the device is measured by using a picoammeter and a nanovoltmeter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.365-370
• /
• 2016

Recently, There are increasing number of studies that apply multi-carrier method, a land mobile communication method, to underwater channel environment in order to enhance the performance of underwater communication. Therefore, in this paper, in order to design a new system with improved communication performance compared to the multi-carrier method in underwater communication, we present that the RS(Resource Spreading) FMT-OFDM system has a diversity and repetition effect from resource spreading. Moreover, we verify the performance of RS FMT-OFDM system and existing FMT-OFDM system through simulations after modeling communication channels and setting the system parameter based on the data measured from the real sea. Our result indicate that, compared to the existing FMT-OFDM system, there has been an improvement in communication performance by 12dB based on BER $10^{-3}$ we also discovered that communication performance improves as the resource spreading rate increases.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1369-1379
• /
• 2016

This research assessed the disparity in anion generation according to the vertical structure of a Zelkova Serrata tree for the purpose of creating a pleasant and green city environment. Measurements for the study were conducted between July and August of 2014 in Chung-ju in the central region of the Republic of Korea. The average anion generation of vertical structure trees during active photosynthesis periods was: L Section ($839.0ea/cm^3$) > M Section ($664.6ea/cm^3$) > U Section ($472.0ea/cm^3$). According to DMRT analysis, significant difference was found in the average between the L, or M Locations and the U Locations. During dormant photosynthesis periods, records showed that the anion production at the M Location ($1,212.5ea/cm^3$) > L Location ($1,050.4ea/cm^3$) > H Location ($844.1ea/cm^3$), According to DMRT analysis, the difference within each location was significant for ${\alpha}=0.05$. In a comprehensive analysis of the weather factors in each vertical structure, anion generation during active photosynthesis periods showed a positive correlation with solar radiation and a negative correlation with wind speed. Dormant photosynthesis periods showed negative correlations with both solar radiation and temperature, and positive correlations with relative humidity and wind speed. Predictions from a multicenter retrospective study showed that during active photosynthesis periods, $Y_1=282.443X_1+512.07$, and $Y_2=314.337X_1+16.913X_2$, while during dormant photosynthesis periods, $Y_1=391.009X_1+840.043$, and $Y_2=351.412X_1+32.765X_2$.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1415-1419
• /
• 1990

A novel type of a play-back servo system with high precision is designed using an iterative learning control method by employing the model algorithmic control concept together with an inverse model. A sufficient condition is also provided for the convergency. It is shown by simulation that the proposed control algorithm yields a good performance even in the presence of a periodic load disturbance and proved by experiments using microprocessor-based play-back servo system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1387-1392
• /
• 1990

In this paper, an iterative learning control algorithm for unknown linear discrete systems is proposed by employing a parameter estimator together with an inverse system model. Regardless of initial error and inherent parameter uncertainty, a good tracking control performance is obtained using the proposed learning control algorithm characterized by recursive operations. A sufficient condition for convergency is provided to show the effectiveness of the proposed algorithm. To investigate the performance of the algorithm a series of simulations and experiments were performed for the tracking control of a servo motor.

• Structural Engineering and Mechanics
• /
• v.14 no.1
• /
• pp.71-84
• /
• 2002

A finite element formulation for the time-domain analysis of linear transient elastodynamic problems is presented based on the weak form obtained by applying the Galerkin's method to the integro-differential equations which contain the initial conditions implicitly and does not include the inertia terms. The weak form is extended temporally under the assumptions of the constant and linear time variations of field variables, since the time-stepping algorithms such as the Newmark method and the Wilson ${\theta}$-method are not necessary, obtaining two kinds of implicit finite element equations which are tested for numerical accuracy and convergency. Three classical examples having finite and infinite domains are solved and numerical results are compared with the other analytical and numerical solutions to show the versatility and accuracy of the presented formulation.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.89-97
• /
• 2010

Digital convergence era has been already started and is rapidly developed. Recently, convergency technology became an essential issue in all industries, and is expected to accelerate. This means that we can experience growth and change of architecture using new technology and approaching method. The AR (Augmented Reality) technology, among these convergence technology, is a kind of virtual reality technology that user can see a scene of real world which is overlapped by virtual world with additional information. It has been used in manufacturing and management in the whole industry fields including medical, mechanical, military field and so on because it can provide higher sense of reality. Thus, in this paper, we suggest the utilization of AR technology for organically connecting the roads, facilities, green area, landscape and others in the layout planning of housing complex. Users can see real world with virtual object by overlap computer graphic on the real world. This method provides users with various information about territoriality and openness. As the result of this study it is expected that this technology will help the layout planning of housing complex to become more reasonable in the aspect of design, time and cost.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.175-180
• /
• 2020

In this study, we developed a micropattern technology in the shape of RFID TAG antenna using ultrasonic micropattern manufacturing system developed to enable micropattern technology. The ultrasonic tool horn in longitudinal vibration mode was installed in the micropattern manufacturing system to develop the ultrasonic press technology for the micropattern antenna shape of the RFID TAG antenna shape on the insulating sheet surface. The ultrasonic shaping technology was manufactured by applying the resonance design technique to a 60kHz tool horn, and by using the micropattern manufacturing system, the coil wire having a thickness of 25㎛ can be ultrasonically press-molded on an insulating sheet of 200㎛ or less. In ultrasonic press technology, the antenna shape having a minimum line width of 150㎛ could be molded without disconnection, peeling, or twisting of the coil wire.

• Fourth Industrial Review
• /
• v.1 no.1
• /
• pp.23-29
• /
• 2021

Purpose - Faced with the great change of the 4th industrial revolution and the addition of the COVID-19 pandemic, great confusion and crises are occurring in the retail environment as well. The purpose of this study is to suggest the necessity of establishing a methodology for applying retail tech to offline distribution channels in crisis. Research design, data, and methodology - After examining the recent developments of representative fields to which retail technology is applied, it is rearranged through consideration through previous studies. Result - The retail industry must transform into digital commerce through digital transformation. According to the development of retail technology, the distribution industry is at a time of change from the stage of brokering product and service transactions to a structure that creates value based on information on production and consumption. The business model of the distribution industry must be converted to a platform business model in which both consumers and producers become users. Conclusion - In-depth analysis of the cases has not been conducted, and there are limitations in that the development is somewhat insufficient due to insufficient prior research data. However, it is meaningful to suggest the necessity of finding a methodology for applying retail technology to overcome the crisis of offline retailers through quantitative research on the retail technology area.