• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.72-91
• /
• 2015

This study is aimed at researching and analyzing the actual conditions of the curriculum and career path of chemical engineering field in specialized high school, and seeking for a curriculum improvement plan for activation by means of identity establishment of chemical engineering field. This study surveyed the actual conditions of school (department) regarding chemical engineering, and analyzed an adequacy among the curriculum, department name and acquired license. The results are as follows. Firstly, In order to the chemical engineering field to maintain the identity of chemical engineering and accept the changes in the industrial site, it is desirable for the department name to use the name of applied science, such as Applied Chemical Industry, Nano Chemical Industry, Environmental Chemical Industry, Energy Chemical Industry, Convergence Materials Science and Chemical Engineering, Ceramic Chemical Engineering, Biomolecular and Chemical Engineering, and Food Bio-chemical Engineering, which are derived from chemical engineering, and the revision of curriculum should be included. Secondly, it is necessary to diversify relevant licenses by standard department of chemical engineering field, and clarify the purpose of human resources development and the image of talented, considering the future course of graduates and the demand of industry, for the purpose of improving school-leveled curriculum to raise the possibility of employment. Thirdly, in accordance with the changing paradigm that secondary vocational education is changed from 'just-to-know education (knowledge)' to 'can-do education (capability)', it is necessary to make the performance ability-centered curriculum in which 'chemical engineering industry - chemical engineering vocational education - chemical engineering qualification' are integrated.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.63-75
• /
• 2010

In this paper, the equalizer techniques that is able to adopt the digital on-channel repeater for 8VSB-based DTV system has been analyzed and we propose an effective equalizer structure which can reduce the error propagation phenomenon by the feedback signal and improve the receiver performance at the same time. In order to confirm the effective cancellation of the feedback signal, the multi-level Correlation LMS scheme is proposed through the analysis of conventional basic LMS based DFE and Correlation LMS algorithm and as compared with the conventional method, we can confirm the reduction of error propagation. When performing the computer simulation, as the Brazil channel model which is very popular for DTV broadcasting system is adopted, the result is drawn by comparing and analysing the equalizer algorithm. We have examine the symbol error rate which is in the range of 15~25dB of operation receipt SNR and MSE(Mean Square Error) in the DTV broadcasting system. As a result of comparing with the existing method, the signal-noise ratio which is necessary for maintain the bit error correction ability that the means of proposal is same is reduced by about 2~5dB, and in the rate of convergence through the MSE, we found the reduction of needed time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.470-477
• /
• 2013

The aim of this study is to suggest a detection method of water surface location and its evaluation results of application for same vertical position in two successive images with time interval including both staff gauge and water surface. A specific rectangular inspection area is defined from the top of watermark and then the correlation coefficients for the inspection area of the same position of two images with short time interval is calculated. Accordingly, it is possible to identify differences between changing area and fixed area of pixel density by the water flow. The photographs taken in the laboratory were analyzed in order to validate the proposed technique. As the result of the experiment, it is identified that characteristic of correlation coefficients depends on the size of the inspection area. In the case that the inspection area is within the entire width of the watermark, water surface characteristic according to correlation coefficients is clearly noticeable. Thus, it is identified that the proposed technique can be utilized to search water surfaces. Besides, using corelation analysis of two images with time interval, it is identified that error range between 10 and 42cm was reduced in the level of 2.6cm or less in the contaminated photo of existing image stage gauge. Therefore, it is expected that the suggested method can be utilized to enhance image stage gauge performance improving the previous water surface detection method.

• Tribology and Lubricants
• /
• v.32 no.3
• /
• pp.75-81
• /
• 2016

Future electronics such as electronic paper and foldable cellphone are required to be flexible and transparent and should have a high performance. In order to fabricate the flexible electronics using flexibility transfer process, techniques for transferring various devices from rigid substrate onto flexible substrate by elastomeric stamp, have been developed. Adhesion between the elastomeric stamp and various devices is crucial for successful transfer process. The adhesion can be controlled by the thickness of the stamp, separation velocity, contact load, and stamp surface treatment. In this study, we fabricated the bump shape stamp consisting of a UV-curable polymer and investigated the effects of curing condition, separation velocity, and contact load on the adhesion characteristics of bumps. The bumps with hemispherical shape were fabricated using a dispensing process, which is one of the ink-jet printing techniques. Curing conditions of the bumps were controlled by the amount of UV irradiation energy. The adhesion characteristics of bumps are evaluated by adhesion test. The results show that the pull-off forces of bumps were increased and decreased as UV irradiation energy increased. For UV irradiation energies of 300 and 500 mJ/cm², the pull-off forces were increased as the separation velocity increased. The pull-off forces also increased with the increase of contact load. In the case of UV irradiation energy above 600 mJ/cm², however, the pull-off forces were not changed. Therefore, we believe that the bump shape stamp can be applied to roll-based transfer process and selective transfer process as an elastomeric stamp.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.225-232
• /
• 2011

Reactive ion etching (RIE) technique for maskless surface texturing of mc-silicon solar wafers has been applied and succeed in fabricating a grass-like black-silicon with an average reflectance of $4{\pm}1%$ in a wavelength range of 300~1,200 nm. In order to investigate the optimized texturing conditions for mass production of high quantum efficiency solar cell Surface characteristics such as the spatial distribution of average reflectance, micrscopic surface morphology and minority carrier lifetime were monitored for samples from saw-damaged $15.6{\times}15.6\;cm^2$ bare wafer to key-processed wafers as well as the mc-Si solar cells. We observed that RIE textured wafers reveal lower average reflectance along from center to edges by 1% and referred the origin to the non-uniform surface structures with a depth of 2 times deeper and half-maximum width of 3 times. Samples with anti-reflection coating after forming emitter layer also revealed longer minority carrier lifetime by 40% for the edge compared to wafer center due to size effects. As results, mc-Si solar cells with RIE-textured surface also revealed higher efficiency by 2% and better external quantum efficiency by 15% for edge positions with higher height.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3672-3679
• /
• 2012

Vehicle Ad hoc Network (VANET) is next-generation network technology to provide various services using V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In VANET, many researchers proposed various studies for the safety of drivers. In particular, using the emergency message to increase the efficiency of traffic safety have been actively studied. In order to efficiently transmit to moving vehicle, to send a quick message to as many nodes is very important via broadcasting belong to communication range of vehicle nodes. However, existing studies have suggested a message for transmission to the communication node through indiscriminate broadcasting and broadcast storm problems, thereby decreasing the overall performance has caused the problem. In addition, theses problems has decreasing performance of overall network in various form of road and high density of vehicle node as urban area. Therefore, this paper proposed Clustering based Routing Algorithm (CBRA) to efficiently transmit emergency message in high density of vehicle as urban area. The CBRA managed moving vehicle via clustering when vehicle transmit emergency messages. In addition, we resolve linkage problem between vehicles according to various form of road. The CBRA resolve link brokage problem according to various form of road as urban using clustering. In addition, we resolve broadcasting storm problem and improving efficacy using selection flooding method. simulation results using ns-2 revealed that the proposed CBRA performs much better than the existing routing protocols.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.425-436
• /
• 2009

In recent years, the user demands have increased for multimedia service of high quality over the broadband convergence network. These rising demands for high quality multimedia service led the popularization of various user terminals and large scale display equipments, which needs a variety type of QoS (Quality of Service). In order to support demands for QoS, numerous research projects are in progress both from the perspective of network as well as end system; For example, at the network perspective, QoS guaranteeing by improving of internet performance such as Active Queue Management, while at the end system perspective, SVC (Scalable Video Coding) encoding scheme to guarantee media quality. However, existing AQM algorithms have problems which do not guarantee QoS, because they did not consider the essential characteristics of video encoding schemes. In this paper, it is proposed to solve this problem by deploying the TS- AQM (Temporal Scalability Active Queue Management) which employs the differentiated packet dropping for dependency of the temporal level among the frames, based on SVC encoding characteristics by exploiting the TID (Temporal ID) field of the SVC NAL unit header. The proposed TS-AQM guarantees multimedia service quality through video decoding reliability for SVC streaming service, by differentiated packet dropping when congestion exists.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.85-93
• /
• 2015

Previous studies have estimated crash prediction models with the fixed effect model which assumes the fixed value of coefficients without considering characteristics of each intersections. However the fixed effect model would estimate under estimation of the standard error resulted in over estimation of t-value. In order to overcome these shortcomings, the random effect model can be used with considering heterogeneity of AADT, geometric information and unobserved factors. In this study, data collections from 89 intersections in Daejeon and estimates of crash prediction models were conducted using the random and fixed effect negative binomial regression model for comparison and analysis of two models. As a result of model estimates, AADT, speed limits, number of lanes, exclusive right turn pockets and front traffic signal were found to be significant. For comparing statistical significance of two models, the random effect model could be better statistical significance with -1537.802 of log-likelihood at convergence comparing with -1691.327 for the fixed effect model. Also likelihood ration value was computed as 0.279 for the random effect model and 0.207 for the fixed effect model. This mean that the random effect model can be improved for statistical significance of models comparing with the fixed effect model.

• Cross-Cultural Studies
• /
• v.25
• /
• pp.453-482
• /
• 2011

Until now and in the studying of fantastic literature, there has been likely to regard the character as secondary element, compared to their actions. However, it has to be recognized that the characters is a barometer to divide the boundary among the marvellous literature, or fantasy, magic realism, etc., in particular it is an important narrative element to understand an epistemological vision of fantastic literature. This thesis analyzes the characters, focusing on two dimensions divided such as between protagonist/antagonist and protagonist narrator/editor narrator. The characters in fantastic literature are usually set-up as people like ourselves, because it is necessary for the readers to consider the supernatural phenomenon as real world situation. The reason why many characters in fantastic literature usually meet a tragic end is that the structure of fantastic literature embedded unresolved supernatural confusion into ordinary order in the end, while antagonists are viewed as holders of extraordinariness and they are far from vero-similarity. Together with usual characters who represent the world of logic and reason, antagonists who seek to understand more about the universe totally and thus regarded as symbols of intuition and imagination and ultimately are the elements of fantastic literature. On the other hand, the "first person narrator" is divided between "protagonist narrator" who narrates the supernatural things through his/her own experience to readers and "editor narrator" who narrates the other's experiences. Particularly in the case of "editor narrator", he/she may narrates the stories with different explication and angle, which lead to hesitation and confusion for readers to identify between reality and unreality or natural logic and supernatural one. Even though there are various categories in fantastic literature, this thesis exclude 'neo fantastic', 'metaphysical fantastic' ones, characterized as a possibility of convergence with the secondary interpretation and symbolic implication. Beyond these materials, the literatures which involved with this thesis and analysis are normally related with traditional fantastic literary works which supernatural events intervene in real world and bring out collision between real and unreal, or natural and supernatural logics. Based on this criteria, this thesis chooses literary works such as "De los Reyes Futuros", "El Perjurio de la Nieve" written by Adolfo Bioy Casares who is a representative author in Latin American fantastic literature.

• Korean Journal of Comparative Education
• /
• v.23 no.5
• /
• pp.19-52
• /
• 2013

This study describes and compares the systems of school internal and external evaluation in South Korea and Sweden. Since education environment over the world has been changing commonly toward 'improving quality of schools' in 'decentralization of education', the more stress goes to 'education evaluation'. In this respect, school evaluation becomes a vital means to monitor schools and improve their weaknesses, as well as to enhance their strengths by informing the public of the results of evaluation. The research explores the systems of South Korean and Swedish school evaluation carried out by internal and external inspectors in order to compare the differences of two countries through qualitative methods by analyzing documents and articles related to school evaluation of two countries. Even though both South Korean and Swedish education have a 'school evaluation system as a unit', the approaches to it vary in accordance with the contexts of each country. In this regard, 'convergence' of having the same education policy of 'school evaluation' and 'divergence' of different approaches toward evaluation systems in each country have been examined in this study.