• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1063-1069
• /
• 2022

In modern industry, vacuum has grown into an indispensable industrial field. The performance of the vacuum pump in the degasser system among mud treatment system facilities was verified by a numerical analysis method. The degasser system is an equipment for removing the gas contained in the mud, and it is a work process that requires a vacuum. This study analyzed the vacuum pump performance of the degasser used in drilling for resource development of onshore and offshore plants. The vacuum pump used in the degasser system was designed with a discharge rate of 0.099kg/s. The DM(Design Modeler) program of ansys workbench 17.2 was used to modify the model of the vacuum pump used in the degasser system. And for performance analysis, CFX, which is known to be suitable for rotating system analysis, was used. Finally the performance analysis results of the vacuum pump and the prototype performance test results were compared and analyzed.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.582-585
• /
• 2011

During disaster response, prioritization of limited resources is one of the most important bust challenging tasks. At the same time, it is imperative to timely provide the rescuers with the adequate equipment to facilitate lifesaving operations. However, supply of high demand equipment was insufficient during the initial phase of disaster response, challenging lifesaving operations in the case of the 9-11 terrorist attacks. In respond to the Haiti Earthquake, spatial information of the geographic area was not sufficient to support the search and rescue operations in the early phase of disaster response. However, with the help of civilians, information such as road names, infrastructure damage, and victim locations were updated into the spatial data repository. At the same time, resource outside of the disaster affected zone converges into the area to assist the response efforts, which is the effect of convergence that often made resource coordination challenging in large scale disasters. To efficiently collect information and utilize the converging resources, this paper proposes a flexible data repository for information update for equipment utilization in large scale disaster response scenarios.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.47-53
• /
• 2020

In the case of a failure due to equipment deterioration in the public address system or a worker's mistake during construction, broadcasting becomes impossible. In this situation, we have designed a more advanced management broadcast system that can broadcast. The broadcasting service is operated using main broadcasting device, and local broadcasting device operates separately only in the local area. If the main broadcasting device becomes inoperable, the procedure for transferring the control activates the device with the local broadcasting devices based on data backed up by the main controller. This paper proposes an improved method of the conventional emergency broadcasting device duplication method. The existing method could not use the standby equipment in the normal state, but in the proposed method, the standby equipment can be used as local broadcasting equipment in usually. This method enables stable system operation while minimizing resource waste due to redundant configuration of expensive devices.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.46-52
• /
• 2022

Although pipe performs various functions in industrial sites and residential spaces, if it is damaged due to corrosion caused by the external environment, it may cause equipment failure or a major accident. For this reason, various studies for safety management are being conducted, but studies on detecting corrosion or cracks on the pipe surface using a laser displacement sensor have hardly been conducted. Therefore, in this study, the corrosion degree of the pipe surface was compared and classified into 4 corrosion conditions, and inspection equipment using a laser scanner was manufactured. The corrosion height was calculated from the four surface data obtained from the measuring equipment and applied to various CNN algorithms, and 91% accuracy was obtained during training using the Modified VGGNet16 code with reduced number of parameters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.149-156
• /
• 2011

There is much information of equipment in shop floor because the manufacturing processes are different as the equipment within the manufacturing process is varied. To provide effective process information to MES and other production systems, the DAS requires an equipment monitoring system that takes into account the characteristics of the equipment on the shop floor. In this study, we proposed some methods for collecting the required information about various equipments on a shop floor. The equipments such as CNC can be interfaced with the DAS by using a PLC-based method and a sensor-based interface board can be used to interface general equipments. The proposed methods can be used to collect information on the shop floor in real-time. Moreover these methods are very adaptive and can be easily modified according to the changes made to the shop floor. The information about a real shop floor acquired by employing these methods is saved in a database and the can be provided to a supervisor and MES so that they are aware of the status of the shop floor.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.279-285
• /
• 2021

The materials, parts, and equipment industries are the backbone of the manufacturing industry and a key element of competitiveness. However, in the case of Korea, as it relies on foreign countries for core materials, parts, and equipment, it is in danger of not only industrial competitiveness, but also security. This study first looked at the outline and current address of the materials, parts, and equipment industries, identified problems and improvements, and examined the efforts and achievements so far for the localization of materials, parts, and equipment in Korea. In addition, after looking at the improvement measures for the government's material, parts, and equipment industry at the institutional level or at the ecological level, the current status and actual condition of localization of local materials, parts and equipment were investigated, and problems and improvements were analyzed. Lastly, this study presented a technology development plan for localization of parts and materials in the region and various institutional improvement plans related to commercialization.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.4
• /
• pp.157-165
• /
• 2011

The study figures out the alternatives of training BIM design experts which is the biggest obstacle in training manpower of professional BIM designer, the largest problem when the plant introduce BIM design about the change in Construction Environment by Equipment Based BIM Design in reality of design followed by equipment based BIM design, education institution plan. BIM is the system which is built to make these information be used easier and technique which enables design construction and maintenance in 3-dimensional virtual space by designing buildings in 3-dimensional space, and by data-basing the generated information of every life-cycle information. As the essential contents of the study, educational institutions with the public authority should invest the opening of educational programs, recruit of experts and development of textbooks from a long-term perspective. And also, the role of public institution is important above all for the development of construction industry.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.4
• /
• pp.205-209
• /
• 2010

Even the domestically small-and medium-sized companies progressed development in the monitoring equipment of inspecting run out in steel wheel aiming to supply and generalize through developing the monitoring equipment for securing quality technology and enhancing quality-test level. Run-Out value in vehicle wheel was measured with Computer & Servo system by using Low-Point marking machine control system, which is this development product. Low-Point value was operated and calculated. It marked by revolving wheel as much as the demanded measurement value based on 1ST harmony curve. Thus, the shipment of inferior product, which occurs in the measurement by the existing worker, could be blocked in advance. In the existing case, 60 sec. was required for inspecting 1 product. However, it came to bring about a rise in production volume through shortening inspection time to 8 seconds and improving workers' operating environment.

• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.35-41
• /
• 2007

In accordance with increasing of digital contents and rising of property value, the importance of storing equipment system which can store and control essential contents has been maximized, and securer storing equipment system overcoming various vulnerabilities is now required. Therefore, in this paper, we analyzed misuse, abuse, modification, leak, and various vulnerabilities of storing equipment system that might be damaged, and we researched into an intrusion detection & recovery system which can solve potential vulnerabilities.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.673-680
• /
• 2019

This study investigates the validity of applying new carbon nanotube (CNT, Carbon Nano Tube) surface heaters, which are applied in combination with various products, to the vessel's materials, and proposes the commercializable products accordingly. In order to actually apply a CNT surface heating system technology to the ship's equipment for the first time in Korea, we carried out the interview of experts in the technology field and the due diligence of the shipyard, and presented the technology road map for the selected three items. Finally, for "Heating System of Ship Fuel Tank" with the highest commercialization potential, we proposed a conceptual diagram to enable the final development of the product through the product analysis.